ZEBRONICS ZEB-VITA Portable BT Speaker User Manual
- June 14, 2024
- ZEBRONICS
Table of Contents
**ZEBRONICS ZEB-VITA Portable BT Speaker User Manual
**
Thank you for purchasing ZEB-VITA BT speaker. Please read this user manual carefully before operation & save it for future reference.
Note:
- Avoid the usage of this product at the high temperature and high humidity environment.
- Avoid the self-disassembly of the products or it results in voiding the product’s Warranty.
- Turn off the speaker when it is not in use. To know more about Terms and conditions for warranty policy, please visit https://zebronics.com/pages/warranty-policy
Features
- Wireless BT
- Supports USB & mSD card
- FM radio
- AUX Input
- Call function
- Media / Volume control
- Built-in rechargeable battery
- TWS Function
- RGB LED Light
- Carry Loop
Specifications
Output power (RMS) : 10W
BT Version: 5.3
Driver size: 52mm
Speaker Impedance: 3Ω
Frequency response : 100Hz-15kHz
S/N Ratio: ≥70dB Max. Supported
USB/mSD memory size: 32GB Supported
audio formats: Mp3
Charging time: 4 h
Playback time : 5 h*
Product Dimension (W x D x H): 17.5 x 7 x 6.5 cm
Net. weight : 427g
PACKAGE CONTENTS
Speaker: 1 U
Charging cable: 1 U
QR Code Guide: 1 U
Button Description
- Power / Mode Button & TWS mode
- Play/Pause, Scan Button, LED Modes & LED on/off
- Next / Volume+ Button
- Prev. / Volume- Button
- USB port
- Microphone
- Micro USB Charging Port
- Micro SD card Port
- AUX port
Button functions
- Press the MODE button to change the input mode of the speaker.
- Short press the button to change the Next track or channel when in BT mode or FM mode respectively. Long press the button to Increase the speaker volume.
- Short press the button to go to the Previous track or channel in BT mode or FM mode respectively. Long press the button to decrease the speaker volume.
- Press the button to Play/Pause the track being played. Long press the same button to scan for FM channels in FM mode.
- During calls, press the button to attend/end a call. Long press the button to reject an incoming call.
- Double tap on MODE button to activate TWS mode.
- Long press SCAN button to change LED light modes or on/off LED light.
Instructions for Use
Charging the Speaker
- Connect the USB charging cable to the Micro USB Charging port of the speaker and insert the other end into a USB power source/adapter.
- Red LED glows indicating that the battery is being charged. The Red LED will turn off once it is fully charged.
Pairing your device with Bluetooth Speaker
- Power ON the speaker until you hear the indication tone for Bluetooth mode.
- Blue LED indicates that your speaker is now ON and is in pairing mode.
- Switch ON BT in your phone or tablet and search for nearby BT devices.
- Search for the BT name “ZEB-VITA RGB” and tap to connect it.
Micro SD / USB mode
Connect the Micro SD card / USB device to the respective ports of ZEB-VITA and the speaker would automatically start playing songs from the Micro SD card/USB device.
AUX mode
Connect the speaker to an audio source (Phone/Laptop) using a 3.5mm to 3.5mm
AUX cable. Once connected, change the speaker to AUX mode and thereafter audio
can be streamed via the speaker from the connected source.
FM Radio mode
Switch the speaker into FM mode, long press the button once to start scanning
for FM channels. Once scanning is complete, press the / button to change the
channels.
TWS function (requires two speakers)
a. Keep both speaker in Bluetooth mode.
b. Double press MODE button for 5 secs on either of the speakers and a
notification tone for the TWS function can be heard.
c. Now switch ON the phone Bluetooth to search for “ZEB-VITA RGB” and
tap to pair it.
d. If you would like to disconnect the two speaker, press Play/Pause
button for 3 secs.
ISO 9001:2015 Certified Company
www.zebronics.com