BOSCH UniversalRake 900 Lawn Raker Instruction Manual

BOSCH UniversalRake 900 Lawn Raker

Safety Notes

• Warning! Read all safety warnings and all instructions.
• Make yourself familiar with the controls and the proper use of the product. Please keep the instructions safe for later use!

Explanation of symbols on the machine

• General hazard safety alert.
• Read instruction manual.
• Make sure that bystanders are not injured by foreign objects being thrown away.
• Warning: Keep a safe distance to the product when operating.
• Caution: Do not touch rotating blades. Sharp blade(s). Beware of severing toes or fingers.
• Switch off and remove plug from mains before adjusting, cleaning or if the cable is entangled and before leaving the garden tool unattended for any period. Keep the power cord away from the raking tines/blades.
• Wait until all machine components have completely stopped before touching them. The tines/blades continue to rotate after the machine is switched off, a rotating blade can cause injury.
• Do not use the product in the rain or leave it outdoors when it is raining.
• Beware electric shock hazard.
• Keep supply flexible cord away from cutting means.
• Do not use a high-pressure washer or a garden hose to clean the machine.
• Carefully check the area where the tool is to be used for wildlife and pets. Wildlife and pets may be injured while the machine is in operation. Thoroughly check the working area and remove any stones, sticks, wires, bones and foreign objects. When using the machine, ensure that no wildlife, pets or small tree stumps are hidden in the dense grass.

Operation

• Never allow children or people unfamiliar with these instructions to use the product. Local regulations may restrict the age of the operator. When not in use store the product out of reach of children.
• Never allow children, persons with physical, sensory or mental limitations or a lack of experience and/or knowledge and/or people unfamiliar with these instructructions to use the product. Local regualtions may restrict the age of the operator.
• Never operate the product when you are tired, ill or under the influence of alcohol, drugs or medicine.
• Never work while people, especially children, or pets are nearby.
• Children should be supervised to ensure that they do not play with the product.
• The user is responsible for accidents or hazards occurring to other people or their property.
• Always wear hearing protection and safety glasses when working with the product.
• Do not wear open rubber shoes or sandals when using the product. Always wear sturdy shoes and long trousers. Do not use barefoot.
• Thoroughly inspect the area where the product is to be used and remove all stones, sticks, wires, bones and other foreign objects.
• Before using, always visually inspect to see that the tines and tine assembly are not worn, damaged or loose.
• Replace worn or damaged tine and assemblies in sets to preserve balance. On multi-tined machines, take care as rotating one tine can cause other tines to rotate.
• Walk, never run.
• Rake/Verticut only in daylight or in good artificial light.
• If possible, avoid using the product on wet grass or take additional precautions to avoid slipping.
• Do not rake/verticut excessively steep slopes.
• Working on banks can be dangerous.
• Always be sure of your footing on slopes or wet grass.
• Rake/Verticut across the face of slopes never up and down.
• Exercise extreme caution when changing direction on slopes.
• Use extreme caution when stepping back or pulling the machine towards you do not overreach and keep balance at all times.
• Always push the product forward when raking/verticutting the lawn and never pull it towards the body.
• Wait until the tines/blades stop if the machine has to be tilted for transportation when crossing surfaces other than grass and when transporting the product to and from the area to be raked/verticut.
• Never operate the machine with defective guards or shields, or without safety devices, for example deflectors and/or grass box in place.
• Switch on the motor according to the instructions with feet well away from rotating parts.
• Do not tilt the product when starting or switching on the motor, except if the machine has to be tilted for starting in long grass. In this case, do not tilt it more than absolutely necessary and tilt only the part which is away from the operator. Always ensure that both hands are in the operating position before returning the machine to the ground.
• Do not put hands or feet near or under rotating parts.
• Always stand clear of the discharge zone when operating the machine.
• Never pick up or carry the machine while the motor is running.
• When storing, make sure that all 4 wheels of the garden tool stand on the ground/floor.
• Only lift the garden tool with the carrying handle. Use the carrying handle with care.
• Do not modify the machine. Unauthorized modifications can impair the safety of your machine, lead to increased noise and vibrations, and poor performance.
• Be careful during adjustment of the product to prevent entrapment of the feet and hands between moving tines/ blades and fixed parts of the machine.
• Avoid operating the product in bad weather conditions especially when there is a risk of lightning.
• Regularly inspect the machine including the supply cable and any extension cables for damaged casings, cable sheaths, exposed wires and cable grips. Do not connect damaged cables to the supply or touch a damaged cable before it is disconnected from the supply. A damaged cable can lead to contact with live parts. Beware electric shock hazard when inspecting for potential contact between water and electricity.
• Do not touch the tines before the machine is disconnected from the supply and the tines have come to a complete stop.
• Keep supply cables and extension cables away from the tines. The tines can cause damage to the cables and lead to contact with live parts. Beware electric shock hazard when inspecting for potential contact between water and electricity.

Additional safety warnings

• Please read this in conjunction with the instruction manual.
• Use extreme caution when stepping back or pulling the machine towards you do not overreach and keep balance at all times.
• Regularly inspect the machine including the supply cable and any extension cables for damaged casings, cable sheaths, exposed wires and cable grips. Do not connect damaged cables to the supply or touch a damaged cable before it is disconnected from the supply. A damaged cable can lead to contact with live parts. Beware electric shock hazard when inspecting for potential contact between water and electricity.
• Keep supply cables and extension cables away from the tines. The tines can cause damage to the cables and lead to contact with live parts. Beware electric shock hazard when inspecting for potential contact between water and electricity.
• Only use this product when connected into a socket which is protected by a circuit-breaker that would be actuated by a 30 mA residual current.
• For electrical safety use a Residual Current Device (RCD) with a tripping current of not more than 30 mA. Always check your RCD every time you use it.

Remove the plug from the socket

• Whenever you leave the machine.
• Before clearing a blockage.
• Before checking, cleaning or working on the machine.
• After striking a foreign object. Inspect the machine for damage and change the blade as necessary.
• If the machine starts to vibrate abnormally (check immediately).

Connecting to the mains

• The voltage indicated on the rating plate must correspond to the voltage of the power source.
• Only use this product when connected into a socket which is protected by a circuit-breaker that would be actuated by a 30 mA residual current.
• Only use or replace power supply cables for this unit which correspond to the types indicated by the manufacturer.
• See the operating instructions for the order no. and types.
• Never touch the mains plug with wet hands.
• Do not run over, crush or pull the power supply cord or extension cord, otherwise it may be damaged. Protect the cable from heat, oil and sharp edges.
• The extension lead must have a cross section in accordance with the operating instructions and be protected against splashed water. The connection must not be in water.
• Always wear gardening gloves when handling or working near the sharp blade/tines.

Electrical Safety

Warning! Switch the product off and pull the mains plug before any maintenance or cleaning. The same applies when the mains cable is damaged, cut or entangled.

• The blade/tines continues to rotate for a few seconds after the machine is switched off.
• Caution do not touch the rotating blade/tines.
• Your product is double insulated for safety and requires no earth connection. The operating voltage is 230 V AC, 50 Hz (for non-EU countries 220 V, 240 V as applicable). Contact your Bosch Service Centre for details. If in doubt contact a qualified electrician or the nearest Bosch Service Centre.
• For electrical safety use a Residual Current Device (RCD) with a tripping current of not more than 30 mA. Always check your RCD every time you use it.
• Keep the supply cables away from moving hazardous parts and avoid damage to the cables; this can lead to contact with live parts.
• The connections (plugs and sockets) should be kept dry and off the ground.
• The supply cables must be inspected for signs of damage at regular intervals and may only be used if in perfect condition.
• If the supply cable on the product is damaged, it must only be replaced by a Bosch Service Centre. Only use approved extension cables.
• Use only extension cords, cables, leads and cable reels that comply with EN 61242/IEC 61242 or IEC 60884-2-7 and are of type H05VV-F or H05RN-F.
• If you want to use an extension cable when operating your product, only the following cable dimensions should be used:
• Nominal conductor area of 1.25 mm2 or 1.5 mm2
• Maximum length 30 m for a Cord Extension Set or maximum length of 60 m for a Cable Reel with Residual Current Device (RCD).
• Note: If an extension cable is used it must be earthed and connected through the plug to the earth cable of your supply network in accordance with prescribed safety regulations.
• If in doubt contact a qualified electrician or the nearest Bosch Service Centre.
• WARNING! Inadequate extension cables can be dangerous. Extension cable, plug and socket must be of watertight construction and intended for outdoor use.
• For products not sold in GB:
• WARNING: For your safety, it is required that the plug attached to the product is connected with the extension cord.
• The coupling of the extension cord must be protected against splash water, be made of rubber or coated with rubber.
• The extension cord must be used with a cable strain relief.

Products sold in GB only
Your product is fitted with an BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362). If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorised customer service agent. The replacement plug should have the same fuse rating as the original plug.

• The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere.
• Products that are only sold in AUS and NZ: Use a residual current device (RCD) with a nominal residual current of 30 mA or less.

Maintenance

• Always wear gardening gloves when handling or working near the sharp tines/blades.
• Keep all nuts, bolts and screws tight to ensure safe working with the product.
• Check the grass box frequently for wear or deterioration.
• Inspect the product and replace worn or damaged parts for safety.
• Ensure replacement parts fitted are Bosch-approved.
• Before storing, make sure that the product is clean and free of residue. If necessary, clean with a soft dry brush.

Symbols
The following symbols are important for reading and understanding the original instructions. Please take note of the symbols and their meaning. The correct interpretation of the symbols will help you to use the product in a better and safer manner.

Intended Use
The garden tool is intended for domestic lawn raking, verticutting or aerating. The garden tool is not intended for hedge cutting, trimming, shredding, etc.

Technical Data

Raker/Verticutter UniversalRake 900 UniversalVerticut 1100

–  Double wound tines

–  Pivoting blades

| | ●

–

| –

●

Collection system| | Jet Collect| Jet Collect
Height of cut| mm| +10/+5/0/-5| +5/0/-5/-10
Weight according to EPTA‑Procedure 01:2014| kg| 10.0| 10.5
Protection class| | / II                                    / II
Serial number| see type plate on garden tool

• The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
• All values in this manual are measured for usage below or equal to 2000 meters above nominal sea level.

Noise/Vibration Information

3 600 H8A 0.. 3 600 H8A 1..

• Noise emission values determined according to EN 50636-2-92.
• Typically the A-weighted noise levels of the product are:

• Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 50636-2-92

Mounting and Operation

Do not connect the product to the mains socket before it is completely assembled.

Action Figure Page

Assembly

Connecting the extension cable

| B| 212
Assembling the grassbox| C| 213
Grassbox assembly| D| 213
Adjusting the working height| E| 214
Switching On and Off UniversalRake 900| F| 214
Switching On and Off UniversalVerti- cut 1100| G| 215
---|---|---
Maintenance, Cleaning and Storage| H| 215

Working Advice

Raking/Verticutting
Place the product on the edge of the lawn, as close to the mains socket as possible. Work away from the mains socket. Position the cable to opposite side (already raked/verticut lawn) at the end of each turn. When raking/verticutting do not overload the motor.

UniversalRake 900
In case of overload, the speed of the motor drops and the motor sound changes. In this case, stop, release the start/ stop lever and adjust to a higher working height. Failure to do so could damage the machine.

UniversalVerticut 1100

• The motor is protected by a safety cut out, which is activated when the blades become jammed, clogged or if the motor is overloaded. When this occurs, switch the product off.
• The safety cut out is only reset when the start/stop lever is released.
• Pull the mains plug, remove any blockages and wait one minute before restarting the product so that the safety cut out can reset itself.
• Always wear gardening gloves when handling or working near the sharp tines/blades.

Note: When waiting for a reset of the safety cut out and actuating the start/stop lever too early with the product plugged into the socket outlet, the reset time of the safety cut out will increase.
If the product cuts out again, increase the working height or postpone use until conditions improve. Please refer to the Trouble Shooting Chart” and “Raking/Verticutting Tips”.

Raking/Verticutting Tips
Optimum conditions for raking/verticutting are when the grass is short and slightly moist. Raking or verticutting the lawn when the soil is very soft or hard can damage it and cause the product to collect poorly.

• Kill moss with a commercially-available moss killer before raking/verticutting.
• Start the product at the highest working height and lower it as required.
• Rake/Verticut the lawn in the one direction, then proceed at right angles a week later until the whole lawn has been completed.
• Depending on the condition of the lawn, raking/verticutting moss and dead plant parts can lead to ragged and bare patches.

Note: In conditions with excessive tree debris (e. g. leaves, twigs, etc.), first clear the surface by using the product with the working height set to 3 or 4.
For best results mow the lawn before reseeding. Promote the spread of grass into bare and weak areas with good quality lawn seed after raking/verticutting. Allow fresh grass seed to root and establish before fertilising, where necessary water to prevent fresh seeds drying out.
Ideal times for raking/verticutting are spring and late autumn. Lawns can also be maintained by raking/verticutting on a higher setting after every six cuts.

Troubleshooting

• The following chart lists problem symptoms, possible causes and corrective action, if your product does not operate properly.
• If these do not identify and correct the problem, contact your service agent.
• Warning: Switch off and remove plug from mains before investigating fault.

In conditions with excessive tree debris (e. g. leaves, twigs, etc.), first clear the surface by using the product with the working height set to 3 or 4.

Maintenance and Service
After-Sales Service and Application Service

• Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. You can find explosion drawings and information on spare parts at: www.bosch-pt.com.
• The Bosch product use advice team will be happy to help you with any questions about our products and their accessories.
• In all correspondence and spare parts orders, please always include the 10‑digit article number given on the nameplate of the product.

EU Declaration of Conformity

• Raker Verticutter Article number
• We declare under our sole responsibility that the stated products comply with all applicable provisions of the directives and regulations listed below and are in conformity with the following standards.

Declaration of Conformity

• Lawn Raker/Verticutter
• UniversalRake 900
• UniversalVerticut 1100
• Article number
• 3.600.H8A.071
• 3.600.H8A.171
• We declare under our sole responsibility that the stated products comply with all applicable provisions of the regulations listed
• below and are in conformity with the following standards.
• Technical file at: Robert Bosch Ltd. (PT/SOP-GB), Broadwater Park, North Orbital Road, Uxbridge UB9 5HJ, United Kingdom
• The Supply of Machinery (Safety) Regulations 2008
• The Electromagnetic Compatibility Regulations 2016
• The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
• Regulations 2012
• The Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001
• EN 60335-1:2012+A11:2014+A13:2017+A1:2019 +A14:2019+A2:2019+A15:2021
• EN 50636-2-92:2014
• EN IEC 55014-1:2021
• EN IEC 55014-2:2021
• EN IEC 61000-3-2:2019+A1:2021
• EN 61000-3-3:2013+A1:2019+A2:2021
• EN IEC 63000:2018
• The Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001:
• 3.600.H8A.071: Measured sound power level 94 dB(A), guaranteed sound power level 96 dB(A)
• 3.600.H8A.171: Measured sound power level 94 dB(A), guaranteed sound power level 96 dB(A)
• Conformity assessment procedure in accordance with schedule 8. Product category: 49

CONTACT

• Great Britain
• Robert Bosch Ltd. (B.S.C.)
• P.O. Box 98
• Broadwater Park
• North Orbital Road
• Denham Uxbridge
• UB 9 5HJ
• At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product in need of servicing or repair.
• Tel. Service: (0344) 7360109
• E-Mail: [email protected].
• You can find further service addresses at:
• www.bosch-pt.com/serviceaddresses.

References

• Invented for life | Bosch Global
• The domain name bosch.mk is for sale
• Početna strana | Bosch u Srbiji
• 巧米网为您服务！(QiaoMi.com)
• Skånevik Ølen Kraftlag AS
• Електроінструменти Bosch | Bosch Professional
• Электроинструменты Bosch | Bosch Professional
• Bosch Power Tools | Bosch Power Tools
• Location selection | Bosch Power Tools
• Електроинструменти на Bosch | Електроинструменти на Bosch
• Service worldwide
• Elektrické nářadí Bosch | Elektrické nářadí Bosch
• Bosch Elektrowerkzeuge und Zubehör | Bosch Elektrowerkzeuge
• Bosch el-værktøj | Bosch el-værktøj
• Bosch-sähkötyökalut | Bosch-sähkötyökalut
• Outillage électroportatif Bosch | Outillage électroportatif Bosch
• Ηλεκτρικά εργαλεία Bosch | Ηλεκτρικά εργαλεία Bosch
• Bosch elektromos kéziszerszámok | Bosch elektromos kéziszerszámok
• Elektronarzędzia Bosch | Elektronarzędzia Bosch
• Scule electrice Bosch | Scule electrice Bosch
• Bosch električni alati | Bosch električni alati
• Bosch Услуги | Электроинструменты Bosch
• Elektrické náradie Bosch | Elektrické náradie Bosch
• Invented for life | Bosch Global
• Ana Sayfa | Bosch Türkiye
• Početna | Bosch u Hrvatskoj
• herramientasbosch.net

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>