SIBRILLE LED Floor Lamp User Manual
- June 14, 2024
- SIBRILLE
Table of Contents
SIBRILLE LED Floor Lamp
Specifications
- Light Source: Integrated LED light source
- Replaceable: No
- Manufacturer: Guangdong Ansiondarry Technology Co.,Ltd.
- Address: Room 301, Building 1, No.7, Yanqian 2nd Road, Houjie Twon, Dongguan City, Guangdong Province, China
NIT:MM
Attention
Tile remote control needs to be paired before use
- How topiary the remote control with ate l hot alluded
- Keep long press the on-off key of the remote control for more than 5 seconds. And plug the power into the socket when pressing.
- If the light flickers, it indicates that the pairing is successful. The remote control can now be used.
REMOTE CONTROL
- The Remote distance is within 25ft (7.62 ). It is magnetic so that you can stick it on the lamp pipe and other magnetic surfaces.
NOTICE
- Read the instructions before using the lamp.
- To ensure long lifetime keep the lamp away from damp, hot or corrosive environments.
- Check for transport damage after receiving the packaged lamp
- Do not disassemble or repair the lamp if you are not qualified to do so by your local regulations.
- Use it with appropriate voltage.
- Do not use frayed appliances or damaged cables.
- Do not touch electrical appliances with wet hands and keep it away from fluids.
- Only use the included power adapter.
- Please cut of the power when the device is not used.
- Only clean with dry cloth, no solvents or cleaning solutions.
- Do not use if exceed the voltage.
- The light source belongs to the integrated LED light source, which is non-replaceable and that the luminaire needed to be dispose if it failed.
WARRANTY
- Offer 12-Month Warranty of this floor lamp, any question about the use of product, contact the emit sibrille@outlook.com
The solution when the remote control cannot control the floor lamp normally:
-
STEP 1CLEAR THE CODE
Reconnect the power adapter after unplugging it 5 times in a row. The floor lamp will flash quickly which means the code has been cleared successfully. -
STEP 2
MATCH THE CODE Lunes the with, the nicator light tums red. Pulsed n white long presong the switch he light will fast, meaning the paring is successful.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>