Reemix FY-MF1002 Electric Milk Steamer Instruction Manual

Reemix FY-MF1002 Electric Milk Steamer Instruction Manual

Important Guarantee

When using electrical appliances, you should always follow basic safety precautions, including:

1. Read all
2. Do not touch hot Use a handle or knob.
3. Do not put wires, plugs or (specific part or part of the problem) in water or other liquids to prevent fire, electric shock and personal injury.
4. It must be closely supervised when any appliance is used by or near
5. Unplug the plug from the socket when it is not used and before Remove the parts after cooling and before cleaning the appliance.
6. Do not operate the appliance when the power cord or plug is damaged, and do not operate the appliance after it breaks down or is damaged in any Return the equipment to the nearest authorized institution for inspection, repair or adjustment.
7. Home appliance manufacturers do not recommend using accessories that may cause fire, electric shock or personal injury.
8. Do not use in outdoors (unless the product is specifically for outdoor use).
9. Do not let the wire hang on the edge of the table or counter, or contact the hot
10. Do not put it on or near a hot gas or electric stove, or in a heated
11. Connect the plug to the appliance firstly, and then plug the power cord into the socket on the To disconnect, turn off any controller and unplug from the wall outlet.
12. Do not use the device for unexpected
13. Scalding may occur if the lid is removed during
14. It is only used in
15. The product shall not be soaked in
16. The filter has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug can only be inserted into a polarized socket in one direction. Turn the plug upside down if the plug cannot be fully inserted into the Please contact a qualified electrician if it is still inappropriate. Do not attempt to modify the plug in any way.
17. a) Provide short power lines (or removable power lines) to reduce the risk of entanglement or tripping with longer power lines.
18. There is a long detachable power cord or extension cord, which can be used if necessary. You should be careful when using it.
19. If a long detachable power cord or extension cord is used:
    • The electrical rating marked on the detachable power cord or extension cord shall be at least the same as the electrical rating of the appliance;
    • If the appliance is grounded, the extension cable should be grounded telephone rope;
    • There should be arranged with the longer rope so that it will not hang on the counter or the top of the table; otherwise, it could pull or trip children.

Save these instructions.

 Important Safety Instructions

1. Please do not add milk that exceeds the maximum marking line into the milk foaming
2. Do not heat oil or melt butter with milk foaming
3. Do not put other containers in the milk foaming machine. The milk must be taken out of the packaging, containers and cans before putting it into the milk foaming
4. Do not  heat  milk  for  infants  with  the  Warning: Do not open the milk foaming machine cover when heating. Warning: Please be careful when holding this product. There would be residual heat in the heating part after use.

Warning: Do not heat water to avoid splashing and hurting people.

5. Please use this product with support at the bottom of the
6. The product shall not be immersed in water for
7. Please turn off the switch or cut off the power supply when replacing the accessories of the product or contacting the use part of the product.
8. Please be careful when pouring out the milk in the milk foaming machine since the milk may be ejected due to steam in the heating
9. Please clean the products and accessories after Please refer to the

cleaning and maintenance section for cleaning methods.

Product Components

1. Transparent lid
2. Blender
3. Milk bubble cup
4. Milk bubble cup
5. Control keys
6. Power base

Technical Parameters of Product

Unpacking and Product Inspection

1. Carefully remove the product and accessories from the original
2. Check whether all parts in the package are complete and undamaged. If the contents of the package are incomplete or the product is damaged, please return the
3. Suffoc6tion h6z6rd: Please place the packaging materials out of the reach of children.

Usage

This product is only applicable to the heating and foaming of milk. Other ways of use may cause product damage or personal injury.

 Before the Initial Use

1. Remove all the packages and store them for future Check whether the equipment has been fully delivered and in place.
2. Place the power base on a dry, horizontal and stable
3. Untie the power cord to the required
4. Plug the power plug into a socket with stable power
5. Clean the inner cup and foaming accessories of the product before use to remove the residues left during production.

Note: Do not immerse the product body in w6ter. Alw6ys keep the connector 6t the bottom of the product dry.

 Installation

1. Please put the blender into the milk bubble (see Figure 1 below). Note: The blender includes pl6stic shell 6nd st6inless-steel spring coil ring 6ssembly. This blender is used for milk fo6ming 6nd milk he6ting.

2. Place the cup body of the milk foaming machine on the power base to ensure the correct operation of the machine (see Figure 2 below), and then insert the plug into the power socket to carry out the normal operation of the machine.

3. Pour the milk into the jar and mark it according to the maximum and minimum in the

4. W6rning: Do not oper6te when there is no minimum liquid level in the cup

5. body. Do not oper6te without 6 blender inst6lled.

6. Put the lid on the cup body, and then press the power button to start the

Instruction Explanation

Key operation interface diagram

1. After the power base is powered on, put the main body of the milk foam machine on the base, and the indicating light on the main body would flash at the same time (see the key operation interface diagram).
2. Press the power button for four times to select the four functions in turn, and turn off the machine for the fifth time.
3. When the light stops at the relevant function position and the key is not operated, it will start three seconds later.
4. During operation, press the key at any time to stop the machine with flashing
5. When the work is completed, the function light
6. In standby mode, the machine enters sleep mode when there is no key operation within 5 All indicating lights are off in this mode.

 Functions Chart:

**Cleaning and Maintenance**

Note: In order to reduce the 6ccumul6tion of milk residue, be sure to

empty 6nd cle6n the residu6l milk immedi6tely 6fter the fo6ming m6chine is used. Do not le6ve the liquid in the fo6ming m6chine overnight.

1. Before cleaning, unplug the power plug from the power socket and let the milk foaming machine completely cool down.
2. Clean the inside of the can with a damp cloth or Only the blender can be disassembled and washed with water.
3. If necessary, connect the blending device to the blending head. Inject clean water to the maximum watermark, and then add a few drops of mild Turn

on the milk foaming machine and wash the inside of the can with soapy water. When the milk foaming machine turns off automatically, pour out the soapy water, and then repeatedly pour in clean water to wash the soap residue and pour it out until there is no residue. Wipe the milk foaming machine with a damp cloth.

Note: Do not immerse the milk fo6ming m6chine or power supply b6se in

w6ter or other liquids. Do not put the milk fo6ming m6chine in t6p w6ter for cle6ning. Do not put the product in the dishw6sher.

1. Ensure that all electrical connectors and sockets are
2. Rinse the lid and stir it with clean water, and then dry it
3. Do not use any solvent or abrasive cleaner, hard brush, metal or sharp object for cleaning. Solvents are harmful to health and will damage the plastic parts of the product; abrasive cleaners and cleaning accessories may scratch the surface of the

 Storage

1. Unplug the power plug and let the milk foaming machine cool
2. Store the milk foaming machine in a cool and dry
3. Do not store the equipment with power
4. Do not wrap the power cord tightly around the
5. Do not apply any pressure on the place where the power line enters the equipment, otherwise it may cause abrasion and fracture of the power

 Operating Environment

1. Please keep it out of the reach of
2. Please use it in a dry place, and do not use in places exposed to high tempera- ture or
3. Relative altitude: <6000 feet (<1828 meters).
4. Operating ambient temperature: 0-40℃.
5. Operating ambient humidity: 10%~95%RH.

 Transportation and Storage Environment

1. Temperature of transportation and storage environment: 0-60℃.
2. Allowable relative humidity: 10%~90%RH
3. It should be placed in a clean and dry place, and it shall not be exposed to high temperature or

Note: It is strictly forbidden to power on 6g6in if the m6chine c6nnot

work norm6lly due to f6ults or other re6sons. Ple6se send the m6chine to the service provider for detection 6nd rep6ir.

HOUSEHOLD USE ONLY

Fei Yue Technology(Shenzhen) Co,. Ltd

Address: Room 606, Longsheng Business Building, 3 Fuhai Technology Industrial estate, Fuyong Town, Baoan District, Shenzhen City, Guangdong Province
Facebook Page: https://www.facebook.com/Reemix.Official/ Service: support@reemixvip.com

Made In China

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>