noblewell NWOC1-1 Office Chair Instruction Manual

noblewell NWOC1-1 Office Chair

Features

Home office use

Backrest Quick or Slight Tilt Tension Adjustment:

Turn the knob in the [+] direction to increase the rocking tension. Turn the knob in the [-] direction to decrease the rocking tension.

Tip:

Tension can be adjusted to suit a particular weight. More tension can be set for heavier weight and less tension for lighter weight. Fine tune the tension according to your needs.

IMPORTANT SAFETY INFORMATION

• Check package contents against supplied parts and hardware list to assure that all components were received undamaged. Do not use damaged or defective parts. lf you require replacement parts, please contact NOBLEWELL customer service at [email protected]
• Carefully read all instructions before attempting installation. If you do not understand the instructions or have any questions or concerns, please contact customer service at [email protected]
• One chair is confined to one person.
• Please put the chair on a flat place when using.
• Please do not let the children under 5 years old to sit the chair alone.
• Please do not sit on the armrest, which would cause damage to the chair and lead to damage.
• Don’t stand on the chair or use it as a ladder or stair.
• Do not put heavy objects on the chair, or use it as trolley.
• Keep your hands away from the seat base mechanism besides the knob to avoid unwanted injuries.
• Do not use items with sharp or hook to scratch the chair.
• Keep the chair away from the fire.
• Please do not sit on the front of the seat to avoid dumping. Please sit at the end of the chair completely. When standing up from the sitting position, please clench the armrests of the chair.
• Please do not lift your legs up while tilting the backrest backwards to avoid dumping.
  

Care And Maintenance

How To Clean

It is recommended that the office chair should be thoroughly cleaned at least once a month to keep its look and functionality at an all-time high.

• Use a vacuum cleaner to suck up the dirt that may be resting on the seat of the fabric office chair. Run the vacuum cleaner on the surface of the chair.
• Get a damp cloth and wipe the armrest clean.
• The casters will stick up if not maintained regularly. Brush the casters with water and finish them up with a damp cloth.
• If mud and other dirt solidified on the surface of the casters, you could also use soap and water to clean it away.
• Use a clean dry cloth to finish off your cleaning session, or leave your office chair to dry out naturally.

How To Care And Maintain

• Direct sunlight can ruin an office chair over time, degrading most fabrics and materials. Keep your office chair out of direct sunlight.
• Humid condition may cause mildew on fabrics or make metal parts rust. Do not keep your office chair in damp environment.
• Be careful with drinks, food, or any type of liquids when you are near your chair. Clean it right away in cases of spillage. Attend stains immediately.
• Avoid the use of acute objects or blades. They may scratch or damage your office chair.
• Cover your chair if possible. Protect it against dirt and dust, and this is the best answer to keeping it clean.
• Carefully examine your chair to ensure that every nut and bolt is fastened, including those connecting the seat, arms, and back, as well as those in the chair’s mechanics. Regularly check the kinetic parts. If there are any issues, fix them.

Supplied Parts and Hardware List

1. Back A x 1
   

2. Seat B x 1
   

3. Leg C x 1
   

4. Leg Cover D x 1

5. Armrest E x 1
   

6. Caster F x 5

7. Gas Lift Cylinder G x 1

8. Mechanism H x 1

9. Headrest I x 1

10. Plastic Cover J x 1

11. Back Stay K x 1

12. M6 x 20mm Bolt a x 4

13. M6 x 25mm Bolt b x 10

14. M6 x 25mm Bolt c x 2

15. M8 x 16mm Bolt d x 3

16. Small Allen Key x 1

17. Large Allen Key x 1

Installation Steps

1. Rotate and press the 5 casters hard into the 5 holes on the leg.

2. Press the leg cover and gas lift cylinder into the leg.

3. Secure the back stay to the back with 4 bolts [b], then attach the plastic cover.
   

4. Connect armrests to the seat with 6 bolts [b] and small Allen key.
   

5. Install the mechanism on the seat with 4 bolts [a] and small Allen key.
   

6. 6-1 Choose proper position when you attach the back stay to the mechanism.
   

Customer support

 (US / CA) 1-800-556-2032
(UK) 44-808-196-3873

 [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>