Shantou Yile S116 RC Brushless Aerial Drone User Manual

Shantou Yile S116 RC Brushless Aerial Drone

Safety precautions

1. in order to ensure the electromagnetic environment requirements of an aviation radio station (station), it is prohibited to use various model remote controllers in the area with the centre point of the airport runway as the centre point and a radius of 5000M. During the period when the relevant departments of the state issue radio control orders and regional areas, the use of model remote controllers shall be stopped as required. Please fly in warm, clear, windless weather. Do not fly in severe weather conditions such as overheating, overheating, strong wind, rainstorms, etc. Please choose an indoor or outdoor open area, and keep a safe distance from people, pets, empty overhead wires and other obstacles. Make sure that no other use the same frequency. Do not let the aircraft out of sight.
2. after the aircraft is started, please do not contact the high-speed rotating part of the aircraft and keep a distance from the high-speed rotating propeller to avoid the risk of strangulation. (Including gears, rotors, etc.)
3. During and after the use of the aircraft, the battery and motor will generate high temperatures. Please do not touch it to avoid the risk of scalding.
4. do not look directly at the light beam of the LED to avoid affecting the eyes.

Warm Tip: It is suggested that beginners practice flying at low altitudes in an open and unmanned place for about 3 days, and then fly to high altitudes after becoming familiar with flying.

SAFETY REGULATIONS

1. Please put the small parts of the aircraft out of the reach of the children to avoid accidents.
2. The aircraft has strong power. for the initial flight, please push the gear lever of the remote control on your left hand slowly to make the aircraft fly as high as slowly as possible and avoid zoom thus resulting in collision and damage.
3. After the end of the flight, please first turn off the power of the remote control and then turn off the power of the aircraft.
4. Please don’t put the battery in a high-temperature or heated place (such as near the fire source or electric heating device)
5. Note that the aircraft should keep a 2 to 3 m distance away from the user or other persons when flying to avoid the craft dashing against the head, face or body of others when landing.
6. When the child manipulates the aircraft, he/she should be directed by an adult at the site and the aircraft should be controlled within the visibility range of the manipulator (or director).
7. When you don’t use the aircraft, please turn off the power of the remote control and aircraft and take out the battery in the remote control.
8. A short circuit cannot occur on the power supply terminal.

MAINTENANCE

1. Please often use a clean soft cloth to clean the product.
2. Avoid putting the product under the sun or avoid the product being heated.
3. Please don’t soak the toy in the water, or else the electronic parts will be damaged.
4. Please check the plug and other accessories at regular times, if you find any damage, please stop using it immediately until it is repaired and restored to a normal state.

KNOW YOUR REMOTE CONTROL

Left-handed switching

• Default left-handed throttle, Long press the “left-handed switching key” before linking to switch to the right-handed throttle.

INSTRUCTIONS FOR REMOTE CONTROL HANDLE/MOBILE PHONE RACK

• Lift the mobile phone rack in the middle of the remote controller upward (FIG. 1), and stretch upward to place the mobile phone (FIG. 2).
• Remote control handle: Pull the bottom handle of the remote control down from the middle position and rotate it into place(FIG. 3).

INSTRUCTIONS FOR CHARGING CONTROLLER

Insert the charging plug of the charging wire into the charging socket of the remote controller, and then connect the USB charger plug to the computer or mobile phone charger for charging. When charging, the charging indicator lights up, and the indicator lights out after full charging. (Charging time is about 60 minutes)
Note: If the charge indicator does not change during charging, this indicates that the battery is fully charged and does not need to be recharged.

INSTRUCTIONS FOR CHARGING DRONE LITHIUM BATTERY

• Take out the drone battery: Press the position shown in the arrow and pull out the battery backwards.

Battery charging steps

Plug the USB Android head into the battery and plug the USB charger Connect the computer or mobile phone charger to charge. When charging, the Android headlight on the battery lights up, and when fully charged, the red light goes out. (Charging time is about 90 minutes)
Note: If the battery is plugged into the charger and the Android headlight on the battery is not on, no recharging is required.

DRONES TO FREQUENCY

Put the drone on the level ground and turn on the power, then turn on the power of the remote control. At this time, the light on the aircraft flashes rapidly, and the light on the remote control flashes. Push the left joystick of the remote control up and then pull it down. The indicator light on the drone is always on, indicating that the frequency linking is successful.

DRONE TAKE OFF

• After the drone is successfully linked, push the throttle handle upwards, and the four blades of the drone will start to rotate.
• After starting, push the throttle handle upwards, and the drone will take off.

OPERATION GUIDE OF AIRCRAFT

Operation direction

• Rise/decline control
• When pushing the left operating lever (accelerator) upward or downward, the aircraft rises or declines correspondingly.

Forward/backward control

• When pushing the right operating lever (steering wheel) upward or downward, the aircraft flies forward or backward correspondingly.

Leftward rotation and rightward rotation control

• When the left operating lever (accelerator) is leftward or rightward, the aircraft rotates leftward correspondingly.

Leftward/rightward flight control

• When pushing the right operating lever (steering wheel) leftward or rightward,, the aircraft flies leftward or rightward correspondingly.

Warning: When the Drone is 30 cm away from the ground, the Drone will become unstable due to the influence of its own blade eddy current, which is called “ground effect reaction”. When the height of the Drone is lower, the effect of the ground effect reaction is the largest.

HEADLESS FUNCTION

• Put the drone directly in front of the remote control, with the nose of the drone facing forward, and take off after frequency alignment. Press the headless mode button during the flight, and the remote control will keep beeping, indicating that When the drone enters the headless mode, the front indicator light of the drone will flash slowly. If you want to exit the headless mode, press the headless mode button again, and the remote control will beep once, then you will exit the headless mode.
• Make sure that the operator is facing the same direction from beginning to end, in the same direction as the drone took off. At this time, no matter which direction the drone faces, the operator dials the direction rocker to retreat, and the drone will retreat towards the operator.

ONE-KEY RETURN FLIGHT (NAMELY ONE-KEY BACKWARD)

• After starting a one-key return flight, the aircraft returns to the location where the operator is. (please ensure the operator is at the back of the aeroplane)
• Enter “one-key return”: long press “one key return key” on the remote control for 3s, the remote control will beep for a while, then the aircraft enters a one-key return state and returns automatically.
• The operator only needs to control the height of the aircraft (please ensure the operator is at the back of the aeroplane) Exit “one key return”: press any keys to relieve one key return mode.

REMOTE CONTROLLER VIDEO PICTURE SHOOTING INSTRUCTIONS

• Video recording Photograph
• Remote control video key, gently press to take photos, and long press to record.

CAMERA ANGLE ADJUSTMENT

• The angle of the camera can be adjusted through the camera adjustment knob during drone flight.
• The knob right turns the camera angle decreases, knob left turns the camera angle increases.

LASER OBSTACLE AVOIDANCE FUNCTION (NEED TO BE PURCHASED SEPARATELY)

• Precautions for the installation and use of obstacle avoidance equipment:
• Use note: Obstacle avoidance equipment must be installed before turning on the power of the drone, otherwise it will damage the obstacle avoidance equipment and affect normal use.

1. Take out the cover for the installation position of the obstacle avoidance equipment.
2. Insert the obstacle avoidance equipment as shown in the picture.
3. The obstacle avoidance equipment will rotate left and right when it is running. Do not manually interfere with it to prevent it from rotating when it is rotating, otherwise, the equipment may be damaged.

• When turning on this product, do not touch the obstacle avoidance equipment, because the obstacle avoidance equipment is in the power-on working state, unauthorized touching will cause the obstacle avoidance equipment to not work normally, and it will most likely damage the obstacle avoidance equipment function.
• When removing the obstacle avoidance equipment, the power of the drone must be turned off before dismantling, otherwise, it will damage the obstacle avoidance equipment and affect normal use.

Precautions for obstacle avoidance function

1. Please install the obstacle avoidance head before starting the machine;
2. The obstacle avoidance distance is about 1 meter, and the remote control will beep when it senses an obstacle;
3. When using the obstacle avoidance function, please fly indoors or outdoors without sunlight (sunlight interferes with the obstacle avoidance function)

Please make sure to install it correctly, wrong! The installation will lead to abnormal flight

RESOLUTION GUIDE FOR COMMON PROBLEMS

ACCESSORIES (OPTIONAL)

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>