NUUGARDEN DS006S Swivel Textilene Dining Chair Instruction Manual
- August 14, 2024
- NUUGARDEN
Table of Contents
INSTRUCTION MANUAL
Swivel Textilene Dining Chair
DS006S
NUU GARDEN
ENJOY LIFE SHARE HAPPINESS
INTRODUCTION
Thanks for purchasing and trusting NUUGARDEN with your home decorating plans.
This product is a piece of furniture designed and made by NUUGARDEN Corp.
We are committed to R&D and innovation and creating the most exquisite and
diverse outdoor series.
After unpacking and before every use, check whether the item shows any damage.
In addition, check that you have all parts and hardware before assembly. If
there is any damage, please do not use it and call customer service at
800-257-7108 or email
service@nuugarden.com. If you do not have all
the parts lists, have your dealer contact us and we will send them to you
immediately.
This item of furniture is intended for indoor and outdoor use. Please take
time to read and follow the instructions below. Then, use this item as
described in this operating manual. We accept no liability for damage caused
by improper use.
ASSEMBLY INSTRUCTIONS
CAVEAT
Note: Please only tighten any bolts once all bolts place correctly and
the product is lying flat.
If you tighten one bolt, it may cause other bolts to get out of position.
STEP 1
Attach the armrest (A) to the seat frame (C) using 2 bolts (G).
Connect the armrest (A) and the backrest (D) with 2 bolts (G). Do not over-
tighten.
Note: Please only tighten any bolts once all bolts place correctly and
the product is lying flat.
If you tighten one bolt, it may cause other bolts to get out of position.
STEP 2
Attach the armrest (B) to the seat frame (C) using 2 bolts (G).
Connect the the armrest (B) and the backrest (D) with 2 bolts (G). Do not
over-tighten.
Note: Please only tighten any bolts once all bolts place correctly and
the product is lying flat.
If you tighten one bolt, it may cause other bolts to get out of position.
STEP 3
Attach the support bar (E) to the seat with 4 bolts (H).
Note: Please only tighten any bolts once all bolts place correctly and
the product is lying flat.
If you tighten one bolt, it may cause other bolts to get out of position.
STEP 4
Finally, insert the swivel chair base (F) to the support bar (E).
Upon completing the entire assembly and bolting up, you can tighten down all
screws.
CARE AND MAINTENANCE
Follow the instructions for the product’s material to ensure it stays in the
best shape as long as possible. The information below is a general guideline.
Don’t hesitate to get in touch with us to learn more.
- Only rinse it thoroughly with clean water to wash away dirt and grime. Never use abrasive cleansers on the furniture since they can attack the surface and leave behind scratch marks.
- For stubborn grime and stains, use a soft sponge and mild soapy water. Then dry it with a cloth or paper towel.
- Check the stability of the screws, nuts, and nut caps before each use. Then, tighten them up after one to two months’ use whenever required.
- Avoid improper use, and be careful not to scratch or damage the surface with sharp objects.
- When you move your furniture, lift it rather than pulling or pushing it to avoid damaging the floor, legs, and mounting.
CUSTOMER SERVICE
Thanks for purchasing NUUGARDEN furniture. We are here to help you maximize
your enjoyment and appreciation of it.
Please do not hesitate to contact our customer service if you have any
questions regarding assembly or accessories.
Add: 6366 Corley Road, Norcross, GA 30071.
Tel: 800-257-7108
Web: https://nuumart.com
E-mail: service@nuugarden.com
Service time: Mon-Fri, 8:30 AM-5:30 PM, EST
Nuu Garden Corp.
Add: 6366 Corley Road, Norcross GA 30071.
Tel: 800-257-7108
Web: https://nuumart.com
E-mail: service@nuugarden.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>