TORRAS CTVK40 Easy Pinch Car Mount User Guide
- June 14, 2024
- TORRAS
Table of Contents
TORRAS CTVK40 Easy Pinch Car Mount
Specifications
- Product Name: Easy Pinch Car Mount
- Model: CTVK40
- Applicable Place: Air Vent
- Thank you for purchasing and using this product!
- In order to bring you a better experience, please read this operation instruction carefully before using this product and keep it properly for future reference.
Specifications
| Product Name | Easy Pinch Car Mount |
|---|---|
| Model | CTVK40 |
| Applicable Place | Air Vent |
Product List
| Car Mount ×1, Air Vent Clip ×2, User Guide ×1
- The parameters above are derived from the laboratory of TORRAS. The actual parameters would be different due to production process and other factors. The image shown here is indicative only.
Overview
Installation Steps
Method 1- Using with the Twist-lock Air Vent Clip
-
Unscrew the retaining nut from the car mount and remove it.
-
Insert the ball joint into the retaining nut from the smaller side.
-
Push the ball joint firmly into the groove on mount, then tighten the retaining nut.
-
Twist the screw knob to adjust the opening size of the clip to fit the air vent.
-
Find a suitable place to insert the car mount. Tighten the screw knob to fix the car mount. Adjust the angle of the car mount to fit your sight.
The suitability of car air vent
- The air vent clip could be compatible with horizontal and vertical air vent outlets. But it cannot support non-intensive, circular or special-shaped air vent outlets.
Note : Please do not twist the air vent clip too tightly, to protect the air vent blade and air vent clip.
Installation Steps
Method 2 – Using with the Triangular Air Vent Clip
-
Unscrew the retaining nut from the car mount and remove it.
-
Insert the ball joint into the retaining nut from the smaller side.
-
Push the ball joint firmly into the groove on the back of the car mount, then tighten the retaining nut.
-
Twist the knob to expand the hook
-
Insert the car mount into a proper position of the air vent, so that the hook hooks the air vent blade sturdily. Then fix the support plate and tighten the knob to lock the car mount. Finally, adjust the angle of the car mount to match your line of sight.
The suitability of car air vent
The air vent clip could not be compatible with horizontal, vertical and
double-circular air vent outlets.
Note : Please do not twist the air vent clip too tightly, to protect the air vent blade and air vent clip.
Using Steps
-
Press the quick release button and then the clamping arms will automatically open. Then, put your phone into the holder and adjust the legs according to the size of your phone to ensure that your phone is clamped securely.
-
Squeeze the clamp arms to hold your phone securely in place.
Attentions
- Avoid dropping.
- Do not disassemble.
- Please install the car mount on a suitable place before driving, do not operate or adjust the car mount during driving.
- Do not install the car mount in places where it might interfere with airbag or driving.
- Keep the car mount away from children.