HESSAIRE MC18M Evaporative Air Cooler User Guide

Table of Contents

HESSAIRE-MC18M-Evaporative-Air-Cooler-PRODUCT

Safety Rules

Read and follow all instructions, cautions, and warnings. Failure to do so could result in personal injury, death or property damage.
The unit must be in the OFF position and UNPLUGGED from the power receptacle before performing any maintenance.
Make sure the electrical power source conforms to the requirement of the evaporative cooler(s) as well as local codes.
To reduce the risk of fire or electrical shock, do not expose electrical connections to water.
Do not touch electrically live components.
Assure that all power cords do not meet any sharp edges, hot surfaces or chemicals. Immediately replace any damaged parts.

Your cooler must be positioned in front of an open window or door if it is to operate effectively. (see below picture)

Always ensure that there is another open window or door through which the air can exhaust from the room.
Ensure the rigid media is kept clean throughout the use of your cooler.
At the end of each day run your cooler on FAN ONLY for 30 minutes to dry out the rigid media.
Before putting your cooler away for winter, always:

CAUTION: BEFORE CLEANING OR SERVICING DISCONNECT THE POWER SUPPLY.

After unpacking your evaporative cooler, carefully inspect for any damage that may have occurred during transit. Inspect for loose, missing or damaged parts.
Contents: Evaporative cooler (1), Casters (4)

HESSAIRE-MC18M-Evaporative-Air-Cooler-FIG-1

Control Panel

Top Handle

Hose Adapter

Our convenient hose adapter allows you to have continuous water fill on your cooler.

Use all precautions and disconnect from the power source before performing any maintenance.

Cleaning Cooler and Rigid Media Pads

The removable panel and media pad can be sprayed out on the ground to clean the pad. Use light pressure when spraying pads. You can use a soft bristle brush to gently wipe away deposits.
NEVER spray pads with water while the cooler is operating, and the fan is running.
This can cause damage to the motor and will void the warranty.
Removal of the Back Panel (Disconnect power supply before this procedure.)

Removal and Replacement of Cooling Media

If your cooler includes media pins, remove them by unscrewing/pulling out the disc.
Remove the media pad. Replace with a new pad.
Reinstall the back panel and you are ready to use the cooler again.
Go to www.hessaire.com for replacement videos and tips for eliminating any odour.

Draining the Cooler Tank

HESSAIRE-MC18M-Evaporative-Air-Cooler-FIG-8

# Parts MC18M

Hessaire Products Inc. Manufacturing Warranty EVAPORATIVE COOLER

Each new cooler is warrantied to be free from defects in material or workmanship for one full year from the date of original purchase.
If a component is found to be defective in this one year, it will be repaired or replaced with a new or refurbished product at the option of the factory.

What is not covered by the warranty

Malfunctions resulting from misuse, negligence, alteration or lack of necessary maintenance.
Loss of time, inconvenience, use of product or other consequential damages due to defects.
Return transportation costs. All return transportation costs are the responsibility of the purchaser.
We do not provide maintenance personnel.

Damaged Shipments

Hessaire is not responsible for damaged shipments or shortages resulting from carrier mishandling.
Notify your carrier’s office immediately to file a claim.
Keep damaged goods and containers for inspection until advised by the carrier as to disposal.

Returns

All items must be returned with all original parts and packaging. Additional charges may apply for any missing or damaged parts.
The customer must re-package and ship their itemS) back to the manufacturer at their own expense.
No freight cost/shipping cost will be re-refunded to the customer.
The customer needs to provide us with the tracking number of the shipment.
Upon receipt of the product, including original parts and packaging, we may issue a full refund for the product or repair or replace the item with a new or refurbished product.
If our returns department finds that the item is not defective, you may be responsible for additional shipping costs as well as a 10- 30% re-stocking fee.

Safety