Aptkdoe M1 Wireless Lavalier Microphone User Manual
- June 14, 2024
- Aptkdoe
Table of Contents
M1 Wireless
Lavalier Microphone
User’s Manual
Quick Operation Guide
Product Description
Thankyou for choosing our product. This product is smart wireless microphone
that provides profession- allege recording output, Right now Plug and play, no
PP s required.
Multiple uses: webcast, Vlog shooting Filming, program interviews, interview
recordings, video teaching, and other accessions,
Package List
| 1 Microphone Transmiter | 2pcs |
|---|---|
| 2 Microphone Receiver | 1pcs |
| 3. Charging Case | 1pcs |
| 4.Type-C Charging Cable | 1pcs |
| 5.Cleaning Eraser | 1pcs |
| 6.User’s Manual | 1pcs |
Outline Picture and Function Description
- Receiver lighting charging port
- Receiver light
- Mobile interface
- Microphone clip
- Type-C charging port
- Microphone light
- Molt-function button
- 0ff button
- TYPEC charging port
- Transmitter digital display
- Digital display of charging compartment
Instructions
Step1:
Plug the receiver into your device and you ‘lose a flashing red light
Step2:
Take out the microphone, the microphone will automatically power on, and the
indicator light will be red and blue flash ultimately
Step 3:
If the red light for the receiver and blue light for transmitter always
keeps on, it means they are paired successfully. Then open the phone camera,
live app, or other apps to start recording.
Indicator Light Description
Microphone transmitter
| Functional status | Key operation | Lighting effect |
|---|---|---|
| Start up | Automatically power on | Alternately flashing red and blue lights |
| Shutdown | Long press the power button for 3S | All lights off |
| Not connected | Alternately flashing red and blue lights | |
| Connected | The blue light s always on, the relight s off | |
| Noise reduction switch | Closed by default, click the multi-function button to | |
| open | Red light and blue light are on at the same time | |
| Click the multi-function button to close | Blue light on red light off |
Reverberation
| Long press the multi-function button to turn on and off the reverb| Flash
red once
Mute| Double clck the multifunction button MIC toute, double-clckagain to
restore the radio state| BugLight fishes, red light of
Charge| | The red hits allays on, the blue lights off
Full charge| | All lights off
Low battery| | The red ight flashes once for 35
Receiver
| Functional status | No button | Lighting effect |
|---|---|---|
| Startup | Plug in to phone Porto power on | Flashing red ight |
| Shutdown | Dial out the mobile phone port to power off and shut down | |
| Not connected | Flashing red ight | |
| Connected | Steady red light |
Charging
For Microphone Transmitter:
- Put the microphone transmitter into the fully charged microphone charging case to charge.
- Or connect the microphone transmitter with the USB cable for charging
- When charging, the front red light on the microphone will be on and will go off when it is fully charged. charged.
For Receiver:
The receiver itself has no need to be charged, but you can charge your smartphone through the receiver while you are recording and the mobile phone is in low-power status. Just plug the charging cable of your phone into the interface port of the receiver, and the mobile phone can be charged through the interface.
Cleaning
When the receiver is plugged into the mobile phone and there is poor
contact, it may be caused by dirt and dust on the receiver plug. At this time,
please use the cleaning eraser we provided to clean the receiver plug.
Technical specifications
| Product Weight: | 68.52 |
|---|---|
| Product Material: | ABS+PC |
| Headphone Monitoring: | Support |
| Reverberation: | Support |
| Transmission Distance: | 20m/65ft |
| One for Two: | 1 Receiver with 2 microphones |
| Noise Cancellation: | Support 3rd Level Noise Cancellation |
| Sound Delay: | ≤25ms |
| Microphone: | -38dB+3dB Omnidirectional |
| SNR: | ≥70dB |
| Battery Life: | 6~7H |
| Transmitter Battery Capacity: | 85mAh |
| Rechargeable Case Battery Capacity: | 600mAh |
| Adapter: | 5V/1A |
Safety information
- This device does not have a power adapter. When charging is required, please use a power adapter that has obtained the CCC certificate and complies with relevant standards.
- Please use this equipment within the temperature range of 0°C-40°C, and store the equipment and accessories within the temperature range of-20°Cto +45°C. When the ambient temperature is too high or too low, it may cause equipment failure.
- Do not expose the device to high temperatures or around heating devices, such as sunlight, heaters, microwave ovens, ovens or water heaters, etc.
- When charging is complete or not charging, please disconnect the charger from the device and unplug the charger from the power.
- The device is equipped with a non-removable built-in battery, please do not replace the battery yourself to avoid damage to the device.
- Please dispose of this equipment, batteries, and related accessories following local regulations, and do not dispose of them as domestic waste.
Special Notice
- Please make sure your device is unlocked and the red light is always on after the receiver is plugged into your smartphone.
- Press the power switch of the microphone for about 1 second to turn it on. If the red light for the receiver and blue light for transmitter always keeps on, it means they are paired successfully.
- To ensure sound quality, please put the microphone at a proper distance and do not put it too close to your mouth. If you want to hold the microphone in your hand, please hold the bottom of it and do not cover the windbreak on the top.
- Any time when you see the red light & blue light flash alternately, it means the connection is failed and you need to restart.
- Press and hold the power switch for about 3 seconds to power off the microphone.
Frequently Questions & Answers
Q: Does this mic require video recording on the phone, or can I use it for audio only through a different app?
A: This microphone works with the apps like a recorder, and camera on phone. It also works with apps Tikor, YouTube, and Facebook for video.
Q: How about the sound quality of this wireless microphone?
A: Kingswells wireless microphone uses an upgraded noise cancellation chip, and is equipped with a furry windscreen, and dual noise cancellation, designed to provide you with clearer audio.
Q: Can two microphones be used at the same time?
A: Yes, two microphones can be used simultaneously.
Q: Is the noise canceling mode turned on automatically?
A: No, this mic supports 3rd level of noise cancellation function, The noise reduction function of the microphone is turned off by default. You can press the multi-function button to manually turn on the noise reduction function when you need it.
Activation & Warranty
Please follow up on the user’s manual step-by-step and we will always stand by
if you have any problems while recording,
If you have any other questions, please contact us.
Activate Permanent After-sales Service: Permanent replacement of damaged,
defective, not upgraded, or missing items.
Please activate via email below within 15 days.
Our Customer Service Email: yefan1357@gmail.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>