HOOVER FH14050V Clean Slate Plus Carpet and Upholstery Spot Cleaner User Manual
- June 14, 2024
- Hoover
Table of Contents
CLEANSLATE™
CARPET & UPHOLSTERY SPOT CLEANER
USER MANUAL
Please visit Hoover.com for video instructions and FAQ’s for this Carpet
Cleaner.
IMPORTANT: READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND USE.
This product is intended for Household use only. If used Commercially,
warranty is VOID.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
READ ALL SAFETY WARNINGS AND INSTRUCTIONS BEFORE USING THIS PRODUCT.
WARNING: WHEN USING AN
ELECTRICAL PRODUCT, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO AVOID
ELECTRIC SHOCK, FIRE, AND/OR SERIOUS INJURY, INCLUDING THE FOLLOWING:
- Fully assemble product prior to use.
- Operate cleaner only at voltage specified on data plate on bottom of cleaner.
- Do not leave appliance when plugged in. Unplug from outlet when not in use and before cleaning or servicing.
- Do not expose to rain, store indoors.
- Do not immerse. Use only on surfaces moistened by cleaning process.
- To Reduce the Risk of Fire and Electric Shock due to internal component damage, use only HOOVER® Cleaning Fluids intended for use with this appliance. See the Cleaning Fluid section of this manual.
- Do not allow to be used as a toy. Not intended for use by children age 12 and under. Close supervision is necessary when used by or near children. To avoid injury or damage, keep children away from the product, and do not allow children to place fingers or other objects into any openings.
- Use only as described in this manual. Use only manufacturer’s recommended attachments and products.
- Do not use product with damaged cord or plug. If product is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, call customer service at 1-800-944-9200 prior to continuing use.
- Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not place product on cord. Do not run appliance over cord. Keep cord away from heated surfaces.
- Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
- Do not handle plug or appliance with wet hands.
- Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
- Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
- Turn off all controls before unplugging.
- Do not use to pick up flammable or combustible liquids, such as gasoline, or fine wood sanding’s, or use in areas where they may be present.
- Connect to a properly grounded outlet only. See Grounding Instructions.
- Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
- Do not use without filters and tanks in place.
- Do not clean over floor electrical outlets.
- Put product away after use to prevent tripping accidents.
- Use extra care when cleaning on stairs. To avoid personal injury or damage, and to prevent the cleaner from falling, always place cleaner at bottom of stairs or on floor. Do not place cleaner on stairs or furniture.
CAUTION: TO REDUCE THE RISK OF DAMAGE:
- Avoid picking up hard, sharp objects with this product, as they may cause damage.
- Store appropriately indoors in a dry place. Do not expose the machine to freezing temperatures.
- Do not use sharp objects to clean out the hose as they can cause damage.
- To assist in reducing drying time, be certain the area is well ventilated when using detergents and other cleaners with this machine.
- To help prevent matting and resoling, avoid contact with carpets until they are dry. Keep children and pets away from carpets until they are completely dry.
- Do not store extractor with solution in tanks.
- DO NOT USE THIS EXTRACTOR ON HARD FLOORS UNLESS YOU HAVE THE PROPER HARD FLOOR ATTACHMENT. USING THIS PRODUCT ON HARD FLOORS MAY SCRATCH OR DAMAGE YOUR FLOOR.
- Water will drip from the tool after use and may puddle. To avoid damage to wood and laminate flooring and to avoid a potential slip hazard, after use (a) do not leave the product on wood and laminate surfaces and remove to a hard surface and (b) place the unit on absorbent material (such as a towel) to soak up drips.
GROUNDING INSTRUCTIONS
This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of the least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment grounding conductor (C) and grounding plug (A). The plug must be inserted into an appropriate outlet (B) that is properly installed and grounded in accordance with all local codes and ordinances.
WARNING: IMPROPER CONNECTION OF THE EQUIPMENT-GROUNDING CONDUCTOR CAN
RESULT IN THE RISK OF ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR
SERVICE PERSON IF YOU ARE IN DOUBT WHETHER THE OUTLET IS PROPERLY GROUNDED. DO
NOT MODIFY THE PLUG PROVIDED WITH THE APPLIANCE – IF IT WILL NOT FIT THE
OUTLET, HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.
This appliance is for use on a nominal 120-volt circuit and has a grounding
plug that looks like the plug (A) illustrated in Fig. 1. A temporary adapter
(D) may be used to connect this plug to a 2-pole receptacle (E) if a properly
grounded outlet is not available (Fig. 2). The temporary adapter should be
used only until a properly grounded outlet (B) can be installed by a qualified
electrician (Fig. 1). The green colored rigid ear, lug, or the like (F)
extending from the adapter must be connected to a permanent ground (G) such as
a properly grounded outlet box cover (Fig. 2). Whenever the adapter is used,
it must be held in place by a metal screw.
NOTE: In Canada, the use of a temporary adapter is not permitted by the
Canadian Electrical Code.
HAVE A QUESTION?
HOOVER® HAS THE ANSWER!
START WITH HOOVER.COM/HELP
DO NOT RETURN TO STORE
Start with 24/7
resources like these:
FAQs
HOW-TO-VIDEOS TROUBLESHOOTING VIDEOS
Or call us and we’ll talk you through it.
CUSTOMER SUPPORT
800-944-9200
Mon-Fri, 9am-6pm EST
GETTING STARTED
- Remove the Solution Tank from the side of the unit, then remove the cap.
- Follow the formula ratio chart to add cleaning formula in the Solution Tank.
- Replace and tighten cap. Slide the tank back into the unit. The tank is secured when you feel a click.
- Unwrap hose from unit. Select the preferred tool and make sure it is attached securely.
NOTE: Read the directions on the Hoover® Carpet
Cleaning fluid prior to use.
CLEANING FLUID: SEE THE HOOVER SOLUTION GUIDE insert or visit
Hoover.com/cleaningsolutions.
CAUTION: Not to be used for grooming a pet.
CAUTION: Do not use this EXTRACTOR on hard floors. Using this PRODUCT on
hard floors may scratch or damage your floor.
Before You Begin Cleaning
Use your Hoover upholstery and spot cleaner only if upholstery fabric is
marked with a “W” (for “wet” clean) or “S/W” (for “solvent/dry” or “wet”
clean). Don’t clean fabric marked “S” (“solvent/ dry” clean only).
Test for colorfastness in a small, hidden area.
Gently rub surface with a dampened white cloth. Wait ten minutes and check for
color removal or bleed with a white paper towel.
NOTE: To prevent staining, use plastic or aluminum foil to protect wood
or metal surfaces from possible water spray.
NOTE: To avoid damage to wood floors underneath area rugs or carpet,
place waterproof material (e.g. plastic) underneath them before cleaning.
OPERATION
CAUTION: Do not clean over floor electrical outlets. Water will drip from the tool after use and may puddle. To avoid damage to wood and laminate flooring and to avoid potential slip hazard, after use (a) do not leave the product on wood and laminate surfaces and move to a hard surface and (b) place the unit on an absorbent material (such as a towel) to soak up drips.
-
Press the Red Power button on top of the unit to turn ON.
-
Hold the tool about 5 inches over the spot or stain. Spray a generous amount of cleaning solution over the soiled area by pressing the trigger behind the tool, and scrub the stain in a back and forth motion.
TIP: For best results, pretreat tough stains before using Clean Slate. -
To lift the stain, suction up the dirt and cleaning solution by applying downward pressure on the front of the cleaning tool and pulling towards you. Repeat as needed.
IMPORTANT: Empty the Recovery Tank when it reaches the MAX fill line or
you hear an audible change. Ensure the tank is secured before cleaning. Ensure
the tank is secured before cleaning.
For best results, pretreat stains with a HOOVER® spot treatment (see HOOVER®
Cleaning Solution Guide) to help loosen and remove even the most stubborn
stains. Distribute a generous amount of pretreat spray on spot, stain, or high
traffic area. Always follow specific directions found on solution label. Wait
5–10 minutes before using machine.
STORAGE: Wrap cord around the cord hooks for convenient storage. Attach
the plug end to the cord. For fast cord release, simply turn the cord wraps
180 degrees to the right or left.
LUBRICATION: The motor is equipped with bearings which contain sufficient
lubrication for their lifetime. The addition of lubricant could cause damage.
Do not add lubricant to motor bearings.
Tools and formula may vary by model.
MAINTENANCE
WARNING: To reduce the risk of personal injury – Unplug before cleaning
or servicing.
WARNING: To reduce risk of fire and electric shock due to internal
component damage, use only HOOVER® cleaning products intended for use with the
appliance, as noted.
This product contains no serviceable parts. If an appliance is not working as
it should, has been dropped, damaged, left outdoors, or dropped into water,
call customer service at 1.800.944.9200 prior to continuing use.
HOW TO CLEAN THE RECOVERY TANK
Press TANK RELEASE button, then lift lid off for emptying and rinsing. Clean
water will help remove dirt & debris from the tank. Let air dry before
reinstalling.
HOW TO CLEAN TOOLS
- Remove the tool from the hose. Rinse hand tool under faucet. Remove the nozzle cover by unlatching the clear tab.
- Remove Insert and rinse under faucet.
HOW TO CLEAN HOSE
-
Remove the solution tank and fill with warm water (max 140˚F (60˚C)) to the small area fill line.
-
Remove any cleaning tool or attachment from the hose, and attach the Hose Rinse Tool to the hose.
-
Ensure both the solution and recovery tanks are secured on the unit. Turn the unit on and hold the trigger for 30 seconds. The clean water will rush through the hose, effectively cleaning and removing odor causing bacteria left in the hose.
Repeat as needed. Let the unit run for 5–10 seconds before turning off. -
Repeat process as needed and turn off the unit when hose is fully clean. Empty the recovery tank.
Thermal Protection
A thermal protector has been designed into your cleaner to protect it from
overheating. When the thermal protector activates, the cleaner will stop
running.
If this happens, proceed as follows:
- Turn cleaner OFF and unplug it from the electrical outlet.
- Empty Recovery Tank.
- Inspect for any obstructions. Clear obstructions if present.
- When cleaner is unplugged and motor cools for 30 minutes, the thermal protector will deactivate and cleaning may continue.
If the thermal protector continues to activate after following the above steps, your cleaner needs servicing.
FORMULA RATIO CHART | SMALL AREA (20 OZ) | LARGE AREA (40 OZ) |
---|
IF USING HOOVER CONCENTRATE
Tank Size 40 oz| Tough Stains: Use formula at 100% concentration.| General
Cleaning: Use 5 oz of formula to 35 oz water.
Formula| Fill formula Small Area Line (20 oz)| Fill water and formula to Large
Area Line (39 oz)
TROUBLESHOOTING
WARNING: To reduce the risk of personal injury – Unplug before cleaning
or servicing.
Replacement parts and accessories such as solutions available at Hoover.com.
If an appliance is not working as it should, has been dropped, damaged, left
outdoors, or dropped into water, call customer service at
1-800-944-9200 prior to continuing use.
Always identify your cleaner by the complete model number. (The model number
appears on the bottom of the cleaner.)
PROBLEM | POSSIBLE CAUSE | POSSIBLE SOLUTION |
---|---|---|
Cleaner won’t run | 1. Power cord not firmly plugged into outlet. | 1. Plug |
unit in firmly.
2. Blown fuse or tripped breaker.| 2. Check fuse or breaker in home. Replace
fuse/reset breaker in home.
3. Needs service.| 3. Visit our website at
www.hoover.com or call
1-800-944-9200.
Cleaner won’t pick up or low suction| 1. Recovery Tank is not installed
correctly.| 1. Check placement of Recovery Tank in base of cleaner.
2. Recovery Tank is full.| 2. Empty Recovery Tank.
3. Recovery Tank is clogged.| 3. Clean Recovery Tank.
4. Air path is clogged.| 4. Remove Hose and Flush out with Clean Water.
5. Recovery Tank debris filter is clogged.| 5. Remove debris filter and
rinse thoroughly, then replace.
Water escaping from Cleaner| 1. Recovery Tank is full.| 1. Empty Recovery
Tank.
2. Recovery Tank is not installed correctly.| 2. Check placement of Recovery
Tank in base of cleaner.
3. Solution Tank not installed properly.| 3. Review “Getting Started” for
Solution Tank Installation.
Cleaner won’t dispense| 1. Solution Tank is empty.| 1. Fill Solution Tank.
2. Solution Tank not installed properly.| 2. Review “Getting Started”
Solution Tank Installation.
3. Needs service.| 3. Visit our website at
www.hoover.com or call
1-800-944-9200.
Hose nozzle will not spray after filling the Clean Water Tank or Solution Tank
Container.| 1. Air is trapped in the pump and hose.| 1. Turn on the cleaner.
If the hose does not spray, prime the pump by lowering the hose down to the
floor and hold the trigger for up to 1 minute.
Motor noise becomes high-pitched| 1. Recovery Tank is full.| 1. Empty
Recovery Tank.
2. Recovery Tank is clogged.| 2. Clean the Recovery Tank.
3. Air path is clogged.| 3. Unclog air path.
4. The float in the Recovery Tank has been activated.| 4. Review Cleaning
the Recovery Tank.
WARRANTY
LIMITED WARRANTY FOR HOOVER® PRODUCT / 2 (TWO) YEAR LIMITED WARRANTY (DOMESTIC
USE)
If this product is not as warranted, contact TTI lor Care North America
Customer Service at 1-800-944-9200.
Please have available the proof of purchase and model number for the warranted
product.
WHAT THIS WARRANTY COVERS: This limited warranty provided by Royal
Appliance Mfg. Co., doing business as TTI Floor Care North America (referred
to hereafter as “Warrantor”) applies only to products purchased in the U.S.
(including its territories and possessions), a U.S. Military Exchange, or
Canada. When used and maintained in normal household use and in accordance
with the Owner’s Guide, this product is warranted against original defects in
material and workmanship for 2 (TWO) year from the date of original purchase
(the “Warranty Period”). If Warrantor determines that the issue you are
experiencing is covered under the terms of this warranty (a “covered warranty
claim”), we will, at our sole discretion and free of charge (subject to the
cost of shipping), either (i) repair your product; (ii) ship you a replacement
product, subject to availability; or (iii) in the event that the applicable
parts or replacement are not reasonably available, ship you a similar product
of equal or greater value. In the unlikely event that we are unable to repair
your product or ship a replacement or similar product, we reserve the right,
at our sole discretion, to issue you a refund or store credit (if applicable)
of the actual purchase price at the time of the original purchase as reflected
on the original sales receipt. Parts and replacements may be new, refurbished,
lightly used, or remanufactured, in Warrantor’s sole discretion.
WHO THIS LIMITED WARRANTY COVERS: This limited warranty extends only to
the original retail purchaser, with original proof of purchase from Warrantor
or an authorized dealer of Warrantor products, in the U.S., U.S. Military
Exchanges, and Canada.
WHAT THIS WARRANTY DOES NOT COVER: This warranty does not cover use of
the product in a commercial operation (such as maid, janitorial, and equipment
rental services, or any other income-generating activity); improper
maintenance of the product; the product if it has been subject to misuse,
negligence, neglect, vandalism, or the use of voltages other than that on the
data plate of this product. This warranty does not cover damage resulting from
an act of God, accident, owner’s acts or omissions, service of this product by
other than Warrantor or a Warrantor authorized service provider (if
applicable), or other acts beyond the control of Warrantor. This warranty also
does not cover use outside the country in which the product was initially
purchased, or resale of the product by the original owner. Pick-up, delivery,
transportation, and house calls are not covered by this warranty.
In addition, this warranty does not cover any product that has been altered or
modified, or repairs made necessary by normal wear or the use of other
products, parts, or accessories which are either incompatible with this
product or adversely affect this product’s operation, performance, or
durability. Normal wear items are not covered under this warranty. Depending
on the product, normal wear items may include, but are not limited to, belts,
filters, brush rolls, blower fans, blower and vacuum tubes, and vacuum bags
and straps.
OTHER IMPORTANT TERMS: This warranty is not transferable and may not be
assigned; any assignment made in contravention of this prohibition is void.
This warranty shall be governed and construed under the laws of the state of
North Carolina. The Warranty Period will not be extended by any replacement of
batteries, parts, or products or by virtue of any repair performed under this
warranty.
THIS LIMITED WARRANTY IS THE EXCLUSIVE WARRANTY AND REMEDY, AND ALL EXPRESS
AND IMPLIED WARRANTIES OTHER THAN THE LIMITED WARRANTY SET FORTH ABOVE,
INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSLY DISCLAIMED. IN NO EVENT WILL WARRANTOR BE LIABLE FOR
ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND OR
NATURE TO OWNER OR ANY PARTY CLAIMING THROUGH OWNER, WHETHER BASED IN
CONTRACT, NEGLIGENCE, TORT, OR STRICT PRODUCTS LIABILITY OR ARISING FROM ANY
CAUSE WHATSOEVER, EVEN IF THIS WARRANTY FAILS OF ITS ESSENTIAL PURPOSE. TO THE
EXTENT PERMITTED BY APPLICABLE LAW, NO WARRANTIES THAT ARISE BY OPERATION OF
LAW, IF APPLICABLE, SHALL EXCEED THE DURATION OF THE LIMITED WARRANTY PROVIDED
HEREIN. Warrantor’s liability for damages to you for any costs whatsoever
arising out of this statement of limited warranty shall be limited to the
amount paid for this product at the time of original purchase.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, disclaimers of implied warranties, or limitations on
the duration of implied warranties, so the above exclusions, disclaimers,
and/or limitations may not apply to you. This warranty gives you specific
legal rights, and you may also have other rights, which vary from state to
state.
GENUINE PARTS AND ACCESSORIES: We recommend using only with genuine
HOOVER® solutions (for carpet and spot cleaners), parts, and accessories.
Damage caused by use with other than genuine HOOVER® solutions, parts, and
accessories is not covered by and may void your warranty.
©2023 Techtronic Floor Care Technology Limited. All Rights Reserved.
Distributed by, Royal Appliance Mfg. Co. Charlotte, NC 28262.
961152204-R1
Documents / Resources
|
HOOVER FH14050V Clean Slate Plus Carpet and Upholstery Spot
Cleaner
[pdf] User Manual
FH14050V, FH14052V, FH14050V Clean Slate Plus Carpet and Upholstery Spot
Cleaner, FH14050V, Clean Slate Plus Carpet and Upholstery Spot Cleaner, Carpet
and Upholstery Spot Cleaner, Upholstery Spot Cleaner, Spot Cleaner, Cleaner
---|---
References
- Vacuum Cleaners | Carpet Cleaners | Hard Floor Cleaners | Hoover
- Vacuum Cleaners | Carpet Cleaners | Hard Floor Cleaners | Hoover
- Parts Finder & Support Library – Hoover
- Vacuum Cleaners | Carpet Cleaners | Hard Floor Cleaners | Hoover
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>