LUXLi ORC-CELL0-N2 Cello 10 Inch RGBAW LED Light User Guide

LUXLi ORC-CELL0-N2 Cello 10 Inch RGBAW LED Light User Guide

Precautions

• Please read and follow these instructions, and keep this manual in a safe place.
• Keep this product away from water and flammable gases or liquids.
• Use only the correct,recommended voltage.
• Do not attempt to disassemble or repairthis product.
• Clean this product with only a soft, dry cloth.
• To avoid damage to this product, be careful not to overtighten or improperly thread any of the threaded fittings.
• All images are for illustrative purposes only.

Overview

Back:

1. Battery slot

2. Battery release button

3. Adjustment knob

4. Brightness knob

5. LCD screen
   Bottom:

6. Mode selector button

7. Power button

8. 1/4-20 socket

9. DC power input

10. USB Type-C™ port

Also Included

• Shoe-mount ball head
• NP-F750 battery
• USB Type-C wall charger
• USB Type-C male to USB Type-C male cable
• Quickstart guide

Specifications

Powering the Cello2

The Cello2 runs on either DC power, a Sony NP-F style battery, or via the USB Type-C™ port.

DC Power
Plug a 2.1 mm power cord into the DC input and a power outlet that outputs at a minimum of 30 W between 11 and 15 V.

Battery
Slide a Sony NP-F style battery into the battery slot, making sure the
terminals and contacts are aligned.

USB Type-C
Connect the Cello2 ’s USB Type-C input with the USB Type-C wall charger. In order to power the Cello2 ,the wall charger must have Power Delivery 3.0 and a minimum output of 30 W at either 12 or 15 V.

Recharging the Battery
The battery can be recharged while seated in the battery slot by connecting a compatible power source to either the DC or USB-C port.

Indicators

1. Operation mode indicator

2. Power mode indicator
   Battery icon: Running on battery power.
   Plug icon: Running on external power source.
   Lightning bolt icon: Charging in progress.

3. Battery indicator

   • Green: 100% to 25%
   • Yellow: 25% to 10%
   • Red: Less than 10%

4. Bluetooth status indicator

   • Search mode
   • Connected

Operation Modes

Each of the four operation modes described below is accessed by repeatedly pressing the mode selector. For complete descriptions and operating instructions, visit luxlilight.com to download the full user manual.

• CCT Mode
  Allows accurate color temperature adjustment from 2800 to 10,000 K and green/magenta saturation level.

• HSL Mode
  Scroll thought the entire color wheel, and adjust the saturation level.

• Filter Mode
  Adjust the color temperature setting in 50 K increments and apply one of the 150 colored gels.

• Effects Mode
  Includes 10 animated effects with variable parameters.

Connecting to the Composer App

1. Enable Bluetooth on your device, and open the Composer app.

2. Power on the Cello².
   Note: If the Bluetooth icon is not visible, follow the instructions to enable Bluetooth below.

3. Tap the Look for Lights icon in the Composer app.

4. The app will prompt you to complete the connection with the Cello². Once you do, the Bluetooth icon changes to connected, and the light is ready to use with the app.
   To disconnect, exit the app.The Cello² will return to Bluetooth search mode.
   To disable Bluetooth on the Cello², press and hold the mode button until the Bluetooth icon disappears.
   To enable Bluetooth, press and hold the mode button until the Bluetooth search icon appears onscreen.

Conduct an orchestra of lights.

The Luxli Orchestra series can produce a dazzling symphony of light. Synchronize LED light units of all sizes, choose from millions of possible colors, apply lighting effects from three selectable modes, and control them instantly with the powerful Composer mobile app.

The Cello2 10-inch multicolor LED light features highly accurate and remarkably versatile RGBAW LEDs.The light is equipped with Bluetooth 5, which pairs with Luxli’s Composer mobile app from up to 100 feet away. Whether controlled via the app or the intuitive interface on the unit itself, the Cello2 will illuminate your creative vision with endless possibilities.

For the latest version of the Composer mobile app, firmware updates, and a PDF of the full user manual, as well as videos and ideas for creative uses for the Cello2 , visit luxlilight.com.

Updating the Firmware

Firmware updates are now available through the Composer app.
Refer to the Composer app’s user manual for information and instructions.

Troubleshooting

• If you encounter any problems, first try turning the device off and then on.
• If the problem persists, remove the battery for 15 seconds, and then restart.

Warnings

• Battery Low: Battery bar indicator turns red when the battery is below 10%. Recharge the battery immediately.

• Battery Empty: The LEDs will shut off.

• Overheat: The LEDs will shut off and brightness adjustment is disabled until the unit has cooled to a safe temperature
  Important! If the unit frequently overheats, contact Luxli customer support.

• USB Insufficient Voltage: UNABLE TO CHARGE — USB PD: 12 or 15 V

• DC Insufficient Voltage: UNABLE TO CHARGE — DC PORT: 11–15 V

One-Year Limited Warranty

This LUXLI product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Luxli Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Luxli along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.luxlilight.com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.

www.gradusgroup.com
LUXLI is a registered trademark of the Gradus Group.
© 2020 Gradus Group LLC.All Rights Reserved.

FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

Important: Changes or modifications to this product not authorized by Gradus Group could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product. This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios,televisions, and other electronic devices.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>