RETOREATH WM5213-YS 3D U-Shape Shower Chair Instruction Manual
- June 14, 2024
- RETOREATH
Table of Contents
RETOREATH WM5213-YS 3D U-Shape Shower Chair
Product Information
Specifications
- Product Name : RETOREATH 3D U-Shape Shower Chair
- Model Number: WM5213-YS
- Product Size: 18.5″ x 21.26″ x (26.38″-31.1″)
- Net Weight : 7.19 lbs
- Load-bearing Capacity : 440 lbs
Assembly Instructions
- Open the packaging and remove the product.
- Place the main frame with the concave surface in the middle on first.
- Put on another main frame with the potential plate, and tighten the short screw.
- Place the backrest tube.
- Place the gasket inside.
- Install the foot tube and pay attention to the direction of the seat plate in the long screw, ensure that the marble is exposed outside the hole.
- Install the backrest, place the gasket, and screw in the short screw.
- Install the armrest to ensure that the marble is exposed outside the hole.
- Installation is complete.
Method for Adjusting Height
To adjust the height of the foot tube:
- Press the marble by hand.
- Pull the pin tube to the appropriate hole position until the marble is completely exposed outside the hole.
- Adjust the four pin tubes to the same height.
- Ensure that the marble head should be fully exposed outside the hole.
FAQ
What is the load-bearing capacity of the RETOREATH 3D U-shaped shower
Chair?
The load-bearing capacity of the chair is 440 lbs.
How do I adjust the height of the foot tube?
To adjust the height of the foot tube, press the marble by hand and pull
the pin tube to the appropriate hole position until the marble is completely
exposed outside the hole. Ensure that all four pin tubes are adjusted to the
same height and that the marble head is fully exposed outside the hole.
PRODUCT DESCRIPTION
- Arc blow molding seat
- Aluminum frame
- Height adjustable
- Latex-free rubber tips
- Armrest
- Backrest
Installations
- Open the packaging and remove the product
- Place the main frame with the concave surface in the middle on first
- Put on another main frame with the potential plate, and tighten the short screw
- Place the backrest tube and pay attention to the direction of the seat plate
- Place the gasket inside the red circle and screw in the long screw
- Install the foot tube to ensure that the marble is exposed outside the hole
- Install the backrest, place the gasket, and screw in the short screw
- Install the armrest to ensure that the marble is exposed outside the hole
- Installation is complete
Method for adjusting the height of the foot tube:
Press the marble by hand, then pull the pin tube to the appropriate hole
position until the marble is completely exposed outside the hole. Adjust the
four pin tubes to the same height, and the marble head should be fully exposed
outside the hole.
TECHNICAL PARAMETERS
- Product Size :18.5”x 21.26”x (26.38”-31.1”)
- N.W.: 7.19 lbs
- Load-bearing: 440 lbs
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>