DEERC D40 Drone for Kids with Camera 1080P HD Instructions

DEERC D40 Drone for Kids with Camera 1080P

D40

• +1(855J777-8866
• usa@deerc.com (USA)
• jp@deerc.com (JP)
• eu@deerc.com (EU)

DISCLAIMER & WARNING

1. Please read this Disclaimer & Warning and Safety Guidelines carefully before using our product. This product is not recommended for people under the age of 14. You now agree to this disclaimer and signify that you have read it thoroughly by using this product. You agree that you are responsible for your conduct, any damage caused while using this product, and any consequence. You agree to only use this product for its designed purposes and under the local laws, regulations, and applicable policies and guidelines that DEERC may provide.
2. When using this product, please strictly abide by the specification requirements and safety guidelines stated in this document. Any personal 1nJury, property damage, legal disputes, and other adverse events caused by violating any safety instructions or due to any other factor WILL NOT be 0EERC’s responsibil

SAFETY GUIDELINES

Check Before Use

1. CD This product is a high-precision drone that integrates various electronic stability and control mechanisms. Please be sure to configure this drone carefully and correctly to ensure safe, accident-free operation.
2. Ensure that the batteries of the drone and transmitter are clean, undamaged, and fully charged before every use.
3. Ensure that all the propellers are intact and are installed in the correct orientation.
4. Please perform a thorough check of the product before each use. Inspect the integrity of the parts, any signs of cracks and wear off on the propellers, battery power and effectiveness of the indicator, etc. If there is any problem found after checking the drone, please refrain from using it until the problem is resolved.

Flight Environment

• Avoid flying over or near obstacles, crowds, high voltage power lines, trees, airports, or bodies of water.
• DO NOT fiy near strong electromagnetic sources such as power lines and base stations, affecting the onboard compass.
• DO NOT use this drone 1n adverse weather cond1t1ons like rain, snow, fog, and win

Operation Requirements

1. DO NOT use this product to follow any moving vehicles.
2. During the fiight, turn off the motors only in an emergency.
3.  When the battery runs low, return the drone to your starting point.
4. DO NOT use this product if you feel tired, take medicine or feel unwell and drink alcohol.
5. Be aware of the volume of noise that the drone produces. Please ensure to keep your distance to avoid ear damage.
6. Stay away from the rotating propellers and motors.
7. DO NOT fly in any spaces where drones are prohibited. Please respect people’s right to privacy by not flying your drone close to others.

 Use of Battery

1. Please ensure batteries are fitted in the correct orientation as shown in the instruction manual.
2. Avoid short circuits by fitting the batteries correctly and do not crush or squeeze the batteries as this could cause the risk of a fire or explosion.
3. DO NOT mix new and old batteries as this can lead to poor performance of the product.
4. Please dispose of used batteries carefully, do not litter, and recycle where ever possible.
5. DO NOT expose dead batteries to heat or fire or they may explode.
6. If the device is not going to be used for an extended period of time, please remove batteries to prevent potential damage to the drone from battery leakage.
7. Only use the USB charging cable that comes with the drone to charge the battery.
8. DO NOT connect the battery directly to wall outlets or car cigarette -lighter sockets will damage your battery since they have different voltages.
9. DO NOT attempt to disassemble or modify the battery in any way
10. DO NOT use the battery if it gives off an odor, generates heat, becomes discolored, deformed, or appears abnormal in any way If any of these situations occur while the battery is in use or being charged, remove it from the device or charger immediately and discontinue use.
11. DO NOT pierce the battery casing with a nail or any other sharp object. Break it open with a hammer, or step on it! Dispose or recycle this battery as it may cause personal injury or damage to your drone.
12. Always charge the batteries on a fireproof surface and away from combustible materials. DO NOT charge on surfaces that can catch fire, including wood, cloth, and carpet.
13. DO NOT immerse the battery in water or get it wet.
14.  DO NOT solder battery terminal in any way
15. Keep batteries out of reach of children or pets.
16. DO NOT short-circuit the battery by connecting wires or other metal object to the positive(+) and negative(-) terminals

MAINTENANCE

1. Clean the drone after each use with a clean, soft cloth.
2. void prolonged exposure to direct sunlight and avoid heat buildup on the drone or batteries.
3. This device 1s not waterproof and must not be submerged or subjected to water under any circumstance. Failure to keep the device completely dry will result in failure and permanent damage to the unit. Be aware that although it might be dry where you are, droplets of rain or mist from a river or waterfall could damage your drone where it is flying.
4.  Frequently check the charging plug and other accessories for signs of damage. If any part of the device or cables is damaged, avoid use or charging until the damaged parts are  replaced.

PACKAGE CONTENTS

DRONE DETAILS

TRANSMITTER DETAILS

• Open the battery cover on the back of the transmitter, insert the three N-.A batteries (Not included) into the battery compartment, and close the battery cover to complete the installation.
• When installing the batteries, please pay attention to the positive and negative polarity of the battery to ensure the correct installation of the batteries.

JOYSTICK MODE

MODE 2 (Default Setting)

• MODE 1
  • To enter Mode 1, long press the Trimmer button while turning on the transmitter. (Please do not release the Trimmer button until the transmitter is powered on.

INSTALLATION

Drone Battery Installation

• Installation: Push the battery correctly into the drone battery compart­ment. Make sure the battery 1s 1n place to ensure that the battery is jammed in the battery compartment.
• Attention: The battery should be installed firmly. Failure to do so may affect the flight safety of your drone. The drone may crash due to a power cut during the flight.
• Removal: As shown above. press the lock button on the battery and pull it back to remove the battery from the fuselage

Propellers

• Connect each propeller to its corresponding motor shalt, either position “A/B,” and lock the propeller to the motor shalt with a screw
• Attention: Pay attention to the “A” or “B” printed on each propeller, The drone will not fly unless the correct propeller is installed on the correct motor shaft

Propeller Guard

• As shown above, install the propeller guard to the motor base. Ensure that the propeller guard is clamped to the motor base to avoid unnecessary loss and damage during flight.

Phone Holder

• As shown above, open the phone holder completely (Pic. 1). Adjust the phone holder upward and downward according to the size of your phone (Pic.2)

CHARGING

Computer USB Port

1. When the drone battery runs low, the indicator lights on the drone will blink continuously.

2. Connect the battery with the USB charging cable.

3. Plug the USB charging cable into a USB charging port on the computer, power bank, or USB adapter (5V/IAJ.

4. When the battery is charging, the indicator light on the USB charging cable is red.
   When the battery is charged, the indicator light on the USB charging cable turns green.

5. The charging time is about 90 minutes.
    Before charging, please read the introduction of the “Use of Battery” section of the “Safety Guidelines” carefully!

USING THE APP

Download APP

• Scan the OR code, connect to the App Store™ or Google™ Play and download the “Deere GO” application for free. Required Operating Systems: iOS 9.0 or later/ Android 5.0 or later.

Connect to Wi-Fi
Turn on the drone, connect your phone to the Wi-Fi network created by the drone. To check the drone’s status on the “Deere GO” App.

1. Open your phone’s Wi-Fi settings and click Wi-Fi to search for the Wi-Fi of the drone.
2. Select the Wi-Fi network: DeercFPV-**.
3. Wait for a couple of seconds for your phone to connect to the drone’s Wi-Fi.
4. Open the “Deere GO” application.
   The connection between your phone and the drone is established automatically

OPERATION GUIDE

All of the following operations on this manual uses MODE

Pairing

1. Long press the Power Switch to turn on the drone. The indicator lights of the drone will keep flashing.
2. Place the drone on a fiat and level surface with the head forward and the tail facing towards the pilot.
3. Long press the Power Switch to turn on the transmitter, and you will hear the “Di Di” sound, then the indicator lights keep fishing.
4. Push the left joystick up then down to pair the drone with the transmitter. The indicator lights on the drone will turn solid if the drone is paired successfully

Calibrating the Gyro

Simultaneously push the left joystick and the right joystick to the bottom right corner to calibrate the gyro. The indicator lights on the drone will blink and turn solid, and the transmitter will send out a long “Di” sound, which indicates the calibration is completed.
Tip: To ensure a stable flight, we suggest that the pilot calibrate the gyro after pairing the drone or after a crash.

• Unlocking/Locking the Motors

• • Unlocking the Motors: As shown above, push the left joystick to the bottom right corner and the right Joystick to the bottom left corner at the same time to unlock the motors. The motors will start to spin.
  • Locking the Motors: Repeat this operation. The motors will stop immediately

Auto Takeoff
There are two methods to take off the drone.

• Method 1:

  • After pairing/calibration. unlock the motors, short press the One Key Takeoff/Landing button, the drone will take off automatically and hover at 4 feet altitude.

• Method 2:

• • After pairing, pick up the drone and lay it fiat on your palm. Gently toss the drone into the air, and 1t will hover in place.

• One Key Landing

• • Short press the One Key Takeoff/Landing button during the night, the drone will automatically land on the ground.

FUNCTIONS DETAILS

• Emergency Stop
  • The Emergency Stop function should only be used in an emergency during the flight to avoid any damage or injury.
• As shown above, long press the One Key Takeoff/Landing button for 2 seconds. the motors will stop immediately
  Attention: Be aware that you risk breakage of the drone if it falls a considerable distance or hits anything at a high rate of speed.

Trimmer

• F/B Sideways Drift Trim : If the drone tends to drift forward, hold down the Trimmer button and do not release it while pushing the right Joystick down to re-balance the drone. If the drone tends to drift backward, hold down the Trimmer button and do not release it while pushing the right joystick up to re-balance the drone.
• 1/R Sideways Drift Trim: If the drone tends to drift left, hold down the Trimmer button and do not release it while pushing the right joystick right to re-balance the drone. If the drone tends to drift right hold down the Trimmer button and do not release it while pushing the right joystick left to re-balance the drone.

Speed Switch

• This drone comes with 2 speed modes (Low/High). As shown above, push the Speed Switch button to the left, the transmitter sends out a “Di” sound, indicating Low Speed. Push the Speed Switch button to the right, the transmitter sends out a “Di Di” sound, indicating High Speed.

Altitude-hold Function

• The drone is designed with an altitude-hold function to maintain its altitude after releasing the left joystick. (The left joystick will automatically spring back to the middle)

Take Photo/Record Video

• Take Photo : Short press the Take Photo/Record Video button, the transmitter sends out a “Di” sound, indicating that the camera has taken one photo successfully
• Record Video: Long press the Take Photo/Record Video button, the transmitter sends out a “OiOi” sound, indicating that the camera is recording video. Long press the button again to exit the Record Video.

Camera Angle Adjustment

• By rotating the drone’s camera manually the camera’s shooting angle will be adjusted. Please adjust the angle according to the using situation. !The camera has a 70″ tilt range.)

High-Speed Rotation

• During the flight, short press the High-Speed Rotation button, the transmitter will make a “Di” sound, which indicates that the drone enters the High-Speed Rotation function. The drone will exit the High-Speed Rotation function automatically IO seconds after, and you can also push the right joystick in any direction to stop the rotation.

Circle Fly

• During the fight, long press the Circle Fly button, the transmitter will make a long “Di” sound, which indicates that the drone enters the Circle Fly This drone will exit the Circle Fly function automatically I 0 seconds after, and you can also push the right Joystick in any direction to exit the Circle Fly

Headless Mode

• Please familiarize yourself with the Headless Mode function first before using this mode. Otherwise, it is easy to lose the drone and cause unnecessary loss.

1. After pairing/calibration, short press the Headless Mode button on the transmitter. In Headless Mode, the indicator lights of the drone will flash continuously, and the transmitter sends out beeps continuously,
2. Press the Headless Mode button again, and you will hear a beep from the transmitter, indicating the drone exits the Headless Mode.

• Please make the pilot stays facing the same direction that the drone head faces at takeoff.
  • While 1n Headless Mode, pushing the nghtJoyst1ck forward will make 1t fly in the direction that the head of the drone faces when it takes off. To make sure the pilot can tell the drone’s direction during the flight we recommend that pilot stays facing the same direction that the drone head faces at take-off. Doing so ensures that when the pilot pushes the right joystick forward/backward, the drone will fly forward/backward toward them. If the pilot moves the right Joystick lefl;lnght, the drone will move lefl;lright relative to them.

Flip

• When you get familiar with all the drone’s functions, you canny this fantastic fiip mode. When you fiy the drone at least IO feet, press in the Right Joystick on the transmitter, then push the right joystick Forward/Backward or Lefl/Right, and the drone will do a flip towards the corresponding direction.
  Tip: This function will perform better when the battery is fully charged. If you do not operate after entering the 360° Flip, short press the right joystick again to exit the 360° Flip.

SPECIFICATIONS

• DRONE
  • Model: 040
  • Weight 70g/2.47oz
  • Max Flight Time I 0minutes (per battery)
  • Motor Model 716
  • Operating Temperature Range: 32″ to I 04’F (0′ to 40′() Size: 188 I 154 I mm/Unfolded 93634 I mm/Folded)
• DRONE BATTERY
  • Capacity: 500mAh
  • Voltage 3.7V
  • Battery Type: Lithium-ion Polymer Battery
  • ChargingTemperatureRange: 4 I ‘ to I 04 ‘F ( 5’ to 40′()
  • Charging Time: 90minutes (Depends on charging power and remaining battery power)
• TRANSMITTER
  • Operating Frequency 2452-24 7 4MHzM
  • Flight Distance 131 feel/40m (Outdoors and unobstructed)
  • Operating Temperature Range 32′ to I 04’F (0′ to 40′()
  • Battery Type : 3* I .SV AAA Battery (Not included)
•   CAMERA
  • Operating Frequency: 2417MHz
  • Lens Angle 67″
  • Manual Adjustable Range -70′-0″
  • Photo Resolution HD 1920 x I 0B0P
  • Video Resolution HD 1920 x I 0B0P
  • Max Transmission Distance: 98feel/30m (Outdoors and unobstruct­ed)
  • Live View Quality: 20fps
• Photo Formats: JPEG
  • Video Formats MP4/AVI
  • Operating Temperature Range: 32′ to I 04’F (0′ to 40’C)
• USB CHARGING CABLE
  • Input SV/IA
  • Rated Power : SW

CONTACT US

• Please do not hesitate to contact us if you need further support.
  • (9 4:00 PM – 7:00 AM (PST) e
  • usa@deerc.com (USA)
  • jp@deerc.com (JP)
  • eu@deerc.com (EU)
  • B +1/855)777-8866
• For online support, please scan this code with Live Chat.

GENERAL INFORMATION

FCC Notice:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, 1nclud1ng interference that may cause undesired operation.

The Supplier’s Declaration of Conformity is available at the following address: https//wwwdeerc.com/Download/US/D40_FCCsDoC.pdf
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

• This equipment generates uses and can radiate radio frequency energy and, if not installed and used 1n accordance with the 1nstruct1ons, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications not expressly approved by the par1y responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure

• The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body.

IC Notice:

• This device complies with Canada Industry licence-exempt RSS standard (s). Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference. Including interference that may cause undesired operation of the device.

HOW TO RECYCLE THIS PRODUCT

• This symbol on the product or its documentation indicates that it MUST not be disposed of together with household waste. Uncontrolled waste disposal may harm the environment or human health.

• Please separate your device from other types of waste by recycling it responsible

• This will help to foster the sustainable re-use of material resources. We suggest you contact your retailer inquire at your local town hall or business store to find out where and how the drone can be recycled.

BATTERY WARNING:

1. Failure to follow all the instructions may result 1n serious 1nJury, irreparable damage to the battery may cause a fire, smoke, or explosion as well.
2. Always check the battery’s condition before charging or using it.
3. Please replace the battery if the battery is dropped or has any peculiar smell, overheating, discoloration, deformation, or leakage.
4. Never use anything other than the approved Li Po Charger to charge the battery. Always use a balancing charger for LiPo cells or a LiPo cell balancer. It is recommended that you use the one provided with the product
5. The battery temperature must never exceed 60″CI I 40″FJ; otherwise, the battery could be damaged or ignited.
6. Never charge the battery on a fiammable surface, near flammable products, or inside a vehiclellt is better to place the battery on a non-flammable and non-conductive surface).
7. Never leave the battery unattended during the charging process. Never disassemble or modify the housing’s wiring, or puncture the cells. Always ensure that the charger output voltage corresponds to the voltage of the battery. Do not short circuit the batteries.
8. Never expose the Li-Po battery to moisture or direct sunlight, or store it in a place where temperatures could exceed 60″CI car in the sun, for example).
9. Always keep it out of reach of children.
10. Improper battery use may result in a fire, explosion, or other hazards.
11. Non-rechargeable batteries are not allowed to be recharged. Rechargeable batteries should be charged under adults’ supervision.
12. DO NOT mix different types of batteries, including the new and used ones.
13. Batteries MUST be inserted with the correct polarity.
14. The supply terminals MUST not be short-circuited. Regular examination of transformer or battery charger for any damage to their cords, plugs, enclosures, and other parts MUST be done. If there is damage, they MUST not be used until the damage has been repaired.
15. The packaging has to be kept since it contains important informa­tion.
16.  The toy is should only be connected to the equipment with the symbol Class II. EU RF Power(EIRPJ < JO dBm (2452-2474MHz)

Caution

1. The max operating of the EUT is 45°C and shouldn’t be lower than -I0°C
2. 2.The device complies with RF specifications when the device is used at 0mm from your body
3. Declaration of Conformity

• Directive 2014/53/EU, the RoHS Directive 2011/65/EU, and Safety
• Directive 2009/48/EC have been fully fulfilled on our product with indication below
• Product Name: Remote control four axis series
• Model/Mark: D40/DEERC
• The Statement of compliance is available at the following address:
  • http//wwwdeerc.com/Download/CE/D40_EU_DOC.pdf
• This product can be used among EU member states.

MANUFACTURER INFORMATION

• Manufactured by
  • Xiamen Huoshiquan Import & Export CO.,LTD.
  • Address: Unit I, Room 501, Hongxiang Building, No.258 Hubin Nan Road, Siming District, Xiamen, China
  • +1(855)777-8866

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>