Huawei E5172 LTE 150Mbps Unlocked Wireless Router User Guide

Huawei E5172 LTE 150Mbps Unlocked Wireless Router

Thank you for purchasing the CPE. This CPE brings you a high speed wireless network connection.
This document will help you understand your CPE so you can start using it right away. Please read this document carefully before using your CPE. For detailed information about the functions and configurations of the CPE, refer to the online help on the web management page that comes with the CPE.
Note: You must install Adobe Reader version 6.0 or higher to read the online help.

Packing List

The following items are included in your CPE package. If any items are missing or damaged, please contact your local dealer. If any of the optional accessories are not included in the package, you can contact an authorized dealer to purchase them separately.

Getting to Know Your CPE

Note: The CPE function descriptions and illustrations in this document are for your reference only. The product you have purchased may vary.

Indicator

1. Power indicator

   • Steady blue: The device is powered on. The power adapter is in use and working properly, or the power adapter is not in use but the battery level is high.

   • Alternating blue and pink: The device is powered on. The power adapter is not in use or not working properly, and the battery level is low.

   • Steady pink: The device is malfunctioning.
     Note: If your device malfunctions, power it off. Wait at least 15 minutes before you power it on again. If the problem persists, contact your dealer.

   • Off: The device is powered off.

2. WLAN indicator

   • On: WLAN function enabled
   • Blinking: Transmitting data through WLAN
   • Off: WLAN function disabled

3. WPS indicator

   • On: WPS function enabled
   • Blinking: WPS interconnection verification is in progress. This process should not take longer than 2 minutes.
   • Off: WPS function disabled

4. LAN indicator

   • On: The port is connected to a device.
   • Blinking: Data is being transmitted through the port.
   • Off: No device is connected to the port.

5. Voice indicator

   • On: Off-hook condition
   • Blinking: Incoming call
   • Off: On-hook condition

6. Signal indicator

   • On: Indicates network signal strength. Full light indicates strong signal.
   • Off: No network signal.

7. WLAN button
   Press and hold for more than 2 seconds to enable or disable the WLAN function.

8. Reset button
   Press and hold for more than 2 seconds to restore the device to its factory settings.
   Note: Restoring the default settings of the CPE will override all the previous settings.

9. WPS button
   After the WPS function is enabled, press and hold this button for more than 2 seconds to initiate WPS interconnection.

10. External antenna port
    Connect to an external antenna.

11. Power button
    Press this button to power the device on or off.

12. Power port
    Connect to the device’s power adapter.

13. LAN port
    Connect to computers, switches, or other network devices.

14. TEL port
    Connect to a phone.

15. USIM card slot
    Accommodate a USIM card.

16. Battery compartment
    Install the battery.

17. Battery port
    Insert the battery connection cable.

18. Battery cover

Note:

• On: An indicator is on.
• Blinking: An indicator turns on and off at regular intervals.
• Off: An indicator is off.
• All indicators except the power indicator are blinking: The device is being upgraded or is restarting. To avoid damage to the device, do not power off during this process.

Getting Started

Installing the USIM Card and the Battery
Install the USIM card and the battery according to the illustration.

Note:

• Do not remove the USIM card when it is in use. Doing so will affect the performance of your CPE and data stored on the USIM card may be lost.
• The CPE automatically charges its battery when connected to a power source.
• The battery is an optional accessory. If it is not included in the package, you may contact an authorized dealer to buy a battery compatible with the CPE.

Connecting to a Power Adapter

Install the power adapter according to the illustration.

Note:

• Only use power adapters compatible with the CPE and provided by a designated manufacturer. Use of an incompatible power adapter or one from an unknown manufacturer may cause the CPE to malfunction, fail, or could even cause a fire. Such use voids all warranties, whether expressed or implied, on the product.
• The CPE’s power adapter model is HW-120100XYW, HW-120200XYW, HKA01212010-XY or HKA02412020-XY. X and Y represent letters or numbers that vary by region. For details about the specific adapter model, contact an authorized dealer.

Connecting a Device to the CPE

Before connecting the device, please read the safety information carefully.

Note:

• During thunderstorms and rainy weather, turn off and disconnect the device.
• Use a standard or authorized external antenna to avoid device malfunctions.

Selecting the Installation Environment
Obstacles such as concrete and wooden walls will affect the transmission of the network signal. It is recommended that when you install devices you choose an open space and ensure that there are no obstructions between the computer and the device. Keep the device away from equipment that generates strong magnetic and electric fields, for instance microwaves, refrigerators, and satellite receivers.

Cable Connection

When connecting, use the power adapter that came as a set with the product. When finished, press the power button to turn on the device. The connection cable illustration is for reference only.

When the device is in use, you can alter its position or orientation to improve signal reception. The signal strength light indicates the received signal strength.

Logging In to the Web Management Page

The web-based configuration utility can be used for initial device installation, parameter configuration, and function management through the browser. The Windows XP operating system and Internet Explorer 7.0 are used as an example. Ensure that the device is connected to the computer. Follow these steps to log in to the web management page:

1. Connect device cables.

2. Configure the computer’s IP address so that the IP addresses of the computer and the device are in the same network segment.
   Note:
   

   • The device’s default IP address is 192.168.1.1, the subnet mask is 255.255.255.0.
   • It is recommended that you use the automatically obtained IP addresses for the computer and domain name system (DNS) server. If you manually configure the computer IP address, you must set the DNS server IP address to the device IP address. Otherwise, you will fail to log in to the web management page.

3. Open the browser, and enter http://192.168.1.1 in the address box.

4. Enter the user name and password to log in to the web management page.
   Note:

   • The default user name is admin.
   • The default password is admin.
   • LTE is a trademark of ETSI.

FAQ’s

What is the Huawei E5172 LTE 150Mbps Unlocked Wireless Router?

The Huawei E5172 is a high-speed 4G LTE wireless router that allows you to connect multiple devices to the internet using a cellular data connection.

Is the Huawei E5172 router unlocked?

Yes, the Huawei E5172 router is unlocked, which means it can work with various carriers and supports different SIM cards.

What is the maximum download speed supported by the Huawei E5172?

The Huawei E5172 supports a maximum download speed of up to 150Mbps over 4G LTE networks.

Can the Huawei E5172 router connect to 3G networks?

Yes, the Huawei E5172 is backward compatible with 3G networks, allowing you to use it in areas where 4G coverage is not available.

How many devices can connect to the Huawei E5172 router simultaneously?

The Huawei E5172 can support up to 32 Wi-Fi-enabled devices simultaneously.

Does the Huawei E5172 support external antennas?

Yes, the router has external antenna ports that allow you to connect external antennas to improve signal reception in areas with weak coverage.

What type of SIM card does the Huawei E5172 use?

The Huawei E5172 router uses a standard-sized SIM card.

Does the router have Ethernet ports for wired connections?

Yes, the Huawei E5172 has four Ethernet ports, allowing you to connect devices that require a wired connection.

Can I use the Huawei E5172 internationally?

Yes, you can use the Huawei E5172 in different countries by inserting a local SIM card from the supported carriers.

How do I change the Wi-Fi password on the Huawei E5172?

You can change the Wi-Fi password by accessing the router's web interface through a web browser and navigating to the wireless settings section.

References:Huawei E5172 Unlocked Wireless Router – fccid.io

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>