BASS JAXX SP-0213 LED Lantern Speaker Instruction Manual

June 9, 2024
BASS JAXX

BASS JAXX SP-0213 LED Lantern Speaker

BASS-JAXX SP-0213-LED-Lantern-Speaker-product

Thank you for purchasing the LED Lantern Wireless Speaker. This manual provides more information about this wireless speaker, please read the instructions before using.

Product Overview

BASS-JAXX SP-0213-LED-Lantern-Speaker-fig-
\(1\)

Package Contents

  • 1(0ne) LED Lantern Speaker
  • 5.9in. x9.84n. x 5.9in. (15cm x 25cm x 15cm)
  • 1(0ne) Charging Cable 11.8in. (30cm)
  • 1(0ne) Instruction Manual

Power On/Off

  • Power on
    Press and hold 2 second on the Power Button.

  • Power off
    Press and hold 2 second on the Power Button.
    Note : Always power off the speaker when not in use.

Pair a Wireless speaker with your mobile device

  1. Keep the distance between your wireless speaker and mobile phone (or other devices) within 32.8 Feet.
  2. Power on the wireless speaker.
  3. Activate the Bluetooth function on your phone within range and select “BT LANTERN SPEAKER” from the list shown.
  4. You will hear a beep sound when pairing is successful.

Reconnect the Wireless speaker to your mobile device

When powered on, the wireless speaker will automatically connect with the last successfully paired device.

Charging your Wireleu speaker

For your safety, please always use the appropriate 5V output charger/Adapter to charge the product DO NOT USE Quick Charging USB Adapter to charge the product, as It might damage the product.

  1. Use the Micro USB charging cable provided with this wireless speaker.
  2. Connect the Micro use plug to Micro USB charging port on the speaker, then connect the USB plug to a USB port on a computer or wait adapter to begin charging.
  3. The LED Indicator will tum red while charging and will tum off once fully charged

NOTE:

  • You must select a qualified charger from a regular manufacturer.
  • You must charge the Wireless speaker if it has been not used for more than 6 months

BASS-JAXX SP-0213-LED-Lantern-Speaker-fig- \(2\)

LED Mode Chango

Short press the Power Button to toggle between Flame LED and Color Changing LED modes.

Technical specification

  • Driver Diameter. 52 mm
  • Impedance: 3.2 Ohms

Power Supply :

  • Li-ion Battery 3.7V 300 mAh
  • Playtime : 1.5-2 Hours
  • Charging Time: 1.5-2 Hours
  • Bluetooth Range : 32.8 Feet

Light Mode:

  • Flame LED Effect Mode
  • Color Changing LED Mode

FAQ

  • if the Wireless speaker cannot be paired wtth your device, please try the following:
    Ensure that your speaker is in pairing mode or reconnection mode.
    Ensure that the Bluetooth search function of your mobile device is activated.

  • if the Wire less speaker cannot be recharged:
    If you use a power outlet, ensure that the power supply Is connected securely and the outlet works. If you use a computer, ensure that it is connected and the use port is powered.

Safety Instructions for the lithium battery and charging the product

  • The input voltage to the product is DC 5V 1A
  • In order to charge the product In safe manner and reliable conditions, please only adopt a certified appropriate charger/ adapter for charging the product.
  • Only charge the product at ambient temperatures between 10 deg “Cl 50 deg °F and 40 deg C1104 deg F.
  • Do not heat above 70 deg “C/158 deg “F, eg. Do not expose to sunlight or throw into fire. off the product after use.
  • Please note that we won’t take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product.
  • In extreme cases, abuse or misuse of the Lithium battery pack can lead to an explosion, heat generation, fire development or smoke development

FCC STATEMENT

  1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
  2. This device may not cause hannful interference.
  3. This device must accept any interference received, Including interference that may cause undesired operation.
  4. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

NOTE : This equipment has been tested and found to comply with the limits for a Class B digltal device, pursuant to Part 15 of the FCC Rules. These limlts are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause hannful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RF wamlng statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Keep All Relevant Information For Future Reference
Distributed by 1616 Holdings, Inc. 701 Market Street, Suite 200 Philadelphia, PA 19106
Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

BASS JAXX User Manuals

Related Manuals