LUTEC 7625701345 Sunshine Outdoor Wall Motion Sensor User Manual

LUTEC 7625701345 Sunshine Outdoor Wall Motion Sensor

Product Information

Specifications:

• Supply Voltage: 220-240 V~, 50/60 Hz
• LED (12.5W): The light source is only exchangeable by a professional.
• Bulb Type: (not specified)
• IP Rating: IP44 (Splash-proof)
• Product Class: Class II (Double Insulated, No earth required)

Safety Instructions:

• REPLACEABLE (LED ONLY) LIGHT SOURCE BY PROFESSIONAL
• Conformity with all relevant EC Directive requirements.
• Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice.

Warranty Conditions:

• The warranty period for LUTEC products is 5 years (2 years for products instructions; offers an extra 15-year anti-corrosion guarantee on all galvanized and resin installation instructions; outdoor luminaires).

• The guarantee applies to all LUTEC indoor & outdoor lighting purchased within the European Union and/or Switzerland whose packaging is labeled accordingly.

• Excluded from the guarantee are replaceable bulbs, batteries,
  starters, and other wear & tear parts and consumables.

• The products are guaranteed against material, manufacturing, or design faults in accordance with the scientific and technical state of the art applicable at the time the products were manufactured.

• In case of warranty, please contact your local dealer/seller from whom you have purchased the product or LUTEC Europe directly. The contact details of the local LUTEC partners can be found on  www.lutec.com.

• The dealer/seller and/or LUTEC Europe must be promptly notified of any defect/fault within 30 days of finding the fault, otherwise, the claim will not be recognized. To make a claim under the warranty, submit the proof of purchase, including the date of purchase and the product model number.

• The guarantee does not include compensation for damage due to interruption of operation, loss or damage, wasted expenditure, installation and removal costs, etc.

• Statutory warranty rights remain unaffected by and apply in addition to this guarantee. The same applies to claims against the seller.

• LUTEC cannot be held liable for transport damage or transport loss.

Product Usage Instructions

Installation:

1. Ensure the power supply is turned off before installation.
2. Mount the product securely on a suitable surface using the provided mounting brackets or screws.
3. If necessary, connect the product to a power source using appropriate electrical connections and follow local electrical codes.

Light Source Replacement:

1. Only a professional should replace the light source (LED) of this product.
2. Contact your local dealer/seller or LUTEC Europe directly for assistance with light source replacement.

Maintenance:

1. Regularly clean the product using a soft cloth and mild detergent. Do not use abrasive cleaners that may damage the surface.
2. Check the product for any signs of damage or wear regularly. If any faults or defects are found, contact your local dealer/seller or LUTEC Europe for assistance.

Disposal:

1. Do not dispose of the product with household waste. Please recycle where facilities exist.
2. Check with your Local Authority or local store for recycling advice and proper disposal methods.

Usage Precautions:

1. Do not expose the product to excessive moisture or water, unless specified as splash-proof.
2. Do not attempt to repair or modify the product yourself. Contact a professional or authorized service center for assistance.
3. Follow all safety instructions and warnings provided in this manual and on the product.

FAQ

• Q: Where can I find the contact details of local LUTEC partners?
  A: The contact details of the local LUTEC partners can be found on www.lutec.com.

• Q: What is the warranty period for LUTEC products?
  A: The warranty period for LUTEC products is 5 years (2 years for products instructions; offers an extra 15-year anti-corrosion guarantee on all galvanized and resin installation instructions; outdoor luminaires).

• Q: Can I replace the light source (LED) myself?
  A: No, the light source (LED) can only be replaced by a professional. Contact your local dealer/seller or LUTEC Europe directly for assistance.

• Q: Can I dispose of the product with household waste?
  A: No, waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice.

WHAT’S INCLUDE

Technical Data

Supply Voltage: 220-240 V~, 50/60 Hz

Safety Instructions

• You can consult the Safety Instructions on our website: www.lutec.com/service/safetyinstructions
• Please scan the QR code underneath. For your convenience you can find these Safety Instructions also in the box.
• This product is fully compliant to the ERP Regulation (EU) 2019/2020 and Amending Regulation (EU) 2021/341.
• Coastal areas are harsh on lamps as the high humidity and exposure to salt accelerates corrosion of the materials. Under these circumstances, we advise to clean your luminaire regularly with a dry cloth. (no detergents)
• This product contains a light source of energy efficiency class .

Installation

Function

Activate sensor override mode

De-activate sensor override mode

Warranty Conditions

All LUTEC products meet the highest quality requirements and have been subjected to strict quality control. The product are designed, produced and tested in accordance with International & European safety standards. LUTEC Europe NV, Herentalsebaan 425, B-2160 Wommelgem – Belgium (“LUTEC Europe”) will grant an operational warranty under the following terms and conditions:

1. The warranty period for LUTEC products is 5 years ( 2 years for products within the Solar Energy ranges) and starts on the date of purchase. LUTEC offers an extra 15 year anti-corrosion guarantee on all galvanised and resin outdoor luminaires.

2. The guarantee applies to all LUTEC indoor & outdoor lighting purchased within the European Union and/or Switzerland whose packaging is labelled accordingly. Excluded are replaceable bulbs, batteries, starters and other wear & tear parts and consumables. The products are guaranteed against material, manufacturing or design fault whereby the scientific and technical state of the art applicable at the time the products were manufactured is relevant.

3. LUTEC Europe can either repair or replace the product. We will replace the old product with a new product of the same model, type and quality free of charge. If the product purchased is no longer manufactured at the time we are notified of the fault, LUTEC Europe will supply a similar product. We do not refund assembly and disassembly costs, transport costs and other expenses, postage fees and similar costs. Furthermore, the guarantee does not include compensation for damage due to interruption of operation, loss of damage, wasted expenditure, installation and removal costs, etc. We cannot be held liable for transport damage or transport loss.
   The guarantee only applies if:

   • the products are used as intended;
   • no unauthorised adjustments/modifications are made to the product by a third party;
   • the products are maintained and cared for as specified in the operating instructions;
   • the lights are mounted and installed in accordance with LUTEC’s installation instructions;
   • the replaceable bulbs comply with the standards applicable to such replaceable bulbs and are specifically approved for the intended use (rating plate, installation/assembly instructions);
   • the product surfaces do not display any signs of chemical or physical damage caused by improper handling (e.g. use of unsuitable cleaning agents or sharp objects).
   • In case of warranty, please contact your local dealer/seller from whom you have purchased the product or LUTEC Europe directly. The contact details of the local LUTEC partners can be found on www.lutec.com. The dealer/seller and/or LUTEC Europe must be promptly notified of any defect/fault within 30 days of finding the fault, otherwise we will not recognise the claim. To make a claim under the warranty, submit the proof of purchase, including the date of purchase and the product model number.

4. Statutory warranty rights remain unaffected by and apply in addition to this guarantee. The same applies to claims against the seller.

Full address of the guarantor: LUTEC Europe NV
Herentalsebaan 425 B-2160 Wommelgem – Belgium
Telephone: : +32 (0)3 284 51 62
Email: info@lutec-europe.com
info@lutec.com
www.lutec.com
www.lutec.com/warranty

LUTEC Europe NV
Herentalsebaan 425
B-2160 Wommelgem
Belgium

LUTEC UK Ltd
110 Brooker Road
EN9 1JH Waltham Abbey
United Kingdom

LUTEC China Head Office
CN8, Far-East Industry Park
Yuyao,Zhejiang
China

DESIGNED IN EUROPE, MADE IN CHINA
+32 3 284 51 62
info@lutec-europe.com
www.lutec.com
www.lutec.com/services/global-network

References

• Home | Lutec
• model.al - Parking Page at iRegister.AL
• LUTEC | Home
• warranty | Lutec

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>