LUTEC 6943101012 Wall Solar Outdoor Lamp User Manual
- October 27, 2023
- LUTEC
Table of Contents
LUTEC 6943101012 Wall Solar Outdoor Lamp User Manual
WHAT,S IN THE BOX
PARTS TOOLS
Technical Data
LED (8W)
Bulb Type: The light source of this luminaire is not replaceable; when the light source reached its end of life the whole luminaire shall be replaced.
Battery: 1 x 3.7 V 1500 mAh Li-ion battery. Item nr: 9759808000
:Conformity with all relevant EC Directive requirements
IP44: Splash-proof
:Class III product – designed to be supplied from a SELV (Separated or Safety Extra-Low Voltage) power source
:Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice.
Safety Instructions
-
You can consult the Safety Instructions on our website: www.lutec.com/service/safetyinstructions
-
please scan the QR code underneath. For your convenience you can find these Safety Instructions also in the box.
-
The battery must be removed from the luminaire before it is scrapped. The battery is to be disposed of safely.
-
The operating time depends on the charging performance in daytime. This would be aected by environment e.g. weather condition and location.
-
Keep batteries out of the reach of children. Do not leave the batteries lying around.
-
There is a risk of children or animals swallowing them. Consult a doctor immediately if a battery is swallowed.
-
Use only rechargeable batteries of the recommended type. Other rechargeable or single-use batteries could explode during charging.
-
Do not allow rechargeable batteries to short-circuit. Otherwise the rechargeable batteries may overheat, become a fire hazard or explode.
-
Never throw rechargeable batteries into fire or water.
Installation
First Use
Function
At dusk, the motion sensor becomes active.
Any movement within the detection reach will switch-on the light. The light
Brightness
- Max.75times: AUTO
- Max.75times: DIM
- 10h: ON
- OFF
Function
At dusk, the motion sensor becomes active.
Any movement within the detection reach will switch-on the light. The light
stays on for 30 sec. At dawn, the motion sensor will deactivate.
Battery Change
LUTEC Europe NV
Herentalsebaan 425
B-2160 Wommelgem
Belgium
+32 3 284 51 62
LUTEC UK Ltd
110 Brooker Road
EN9 1JH Waltham Abbey
United Kingdom
LUTEC USA LLC
149B Houston Rd
Troutman NC 28166, USA
+877-714-8669
LUTEC China Head Office
CN8, Far-East Industry Park
Yuyao,Zhejiang
China
DESIGNED IN EUROPE, MADE IN CHINA
http://www.lutec.com/services/global-network