A2AIR Pro Android Auto Wireless Adapter for Car User Manual
- June 14, 2024
- Android Auto
Table of Contents
A2AIR Pro Android Auto Wireless Adapter for Car
READ ME FIRST
This adapter is designed for Android smartphones to use Android Auto wirelessly on factory car multimedia system which has built-in wired Android Auto function.
| Function | Convert OEM wired Android Auto to wireless |
|---|---|
| Compatibility | Cars with OEM Android Auto |
| Control | OEM touch screen, steering wheel, and joystick control |
| Input Power | USB 5V~1A |
| Connectivity | Wi-Fi & Bluetooth |
What’s in the box
- Wireless adapter *1
- USB cable (Type-C to A) *1
- USB cable (Type-C to C) *1
- User manual *1
- Double-sided sticky pad *1
Interface and connector
Click once while working: disconnect the current connected phone.
Press and hold for 3s then release: switch to update mode.
Press and hold for more than 15s: factory reset, all connection history
will be erased.
Connection diagram
NOTE! The adapter should be plugged into the Android Auto-enabled USB port if there are multi USB ports in your car.
Setting up wireless Android Auto
-
Install Android Auto on your smartphone, next enable [Wireless Android Auto] in Android Auto app settings.
-
Pair your smartphone with the vehicle’s Bluetooth.
-
Plug the adapter into your vehicle’s Android Auto-enabled USB port.
-
Continue to pair your smartphone with the adapter’s Bluetooth: [OTTO-xxxx].
It will then connect to Android Auto wirelessly after a few seconds.
Firmware update
Firmware update is NOT recommended when every function works well.
-
If you have connected to Android Auto wirelessly, disable Bluetooth and forget the Wi-Fi network first.
-
While powered on, press the button and hold for 3s then release. The led indicator will switch to green light after 1-2 seconds.
-
On your phone, go to Wi-Fi >> Advanced settings >> Wi-Fi direct, tap [OTTO-xxxx] and make sure it has connected
-
Enter 192.168.1.101 on smartphone browser, next tap “Update”.
NOTE! The blue and red LED indicators will flash alternatives while updating. Wait for more 30s after the white indicator is solid, then disconnect and reconnect the adapter from USB port to finish the whole update.
How to report an issue
Any issue while using the adapter, you could directly report the issue online
and send the feedback screenshot to email
support@ottocast.com. We will fix it as soon as
possible.
Follow the 1-3 steps of [Firmware update] on the previous page, then enter
192.168.1.101 again on the browser to submit the issue.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference；
- this device must accept any interference received, including interference that may cause undesired operation.
Google, Google Play, Android, Android Auto, are trademarks of Google Inc.,
registered in the U.S. and other countries.
Apple, iPhone, iPad, and Car Play are trademarks of Apple Inc., registered in
the U.S. and other countries.
We are not affiliated with Google Inc. or Apple Inc. All other product and
service names mentioned are the trademarks of their respective companies.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>