Whirlpool WRS325SDHB Side-By-Side Water and Ice Dispenser User Guide

June 12, 2024
Whirlpool

Whirlpool WRS325SDHB Side-By-Side Water and Ice Dispenser

Product Information:

This product is a Side-By-Side Water and Ice Dispenser. It features a water dispenser paddle (A) and a water dispenser spout (B) for dispensing water, as well as an ice dispenser paddle (C) and an ice guide (D) for dispensing ice. The dispenser also has a small tray at the bottom to catch spills and facilitate easy cleaning.

To dispense ice, the ice maker storage bin in the freezer is used, and the desired type of ice can be selected by pressing the Ice Type button. The display screen indicates the selected ice type. When switching from crushed to cubed ice, a few ounces of crushed ice may be dispensed along with the first cubes. It is important to use a sturdy glass when dispensing ice to avoid cuts.

Product Usage Instructions

Dispensing Water:

  1. Press a sturdy glass against the water dispenser lever.
  2. Hold the glass close to the water dispenser spout to ensure that the water dispenses into the glass.
  3. Remove the glass to stop dispensing.

Note: The small tray at the bottom of the dispenser is designed to catch small spills. To empty and clean the tray, push down on the back of the removable tray and pull it out.

Dispensing Ice:

  1. Make sure the desired type of ice is selected by pressing the Ice Type button.
  2. Press a sturdy glass against the dispenser lever.
  3. Hold the glass close to the ice guide to ensure that the ice dispenses into the glass.
  4. Remove the glass to stop dispensing.

Note: It is not necessary to apply a lot of pressure to the paddle for ice dispensing. Pressing hard will not make the ice dispense faster or in greater quantities.

Important: To turn off the ice maker, refer to the Ice Maker and Storage Bin section in the Owner’s Manual.

Please refer to the provided user manual for further instructions and safety information.

Side-By-Side Water and Ice Dispensing Guide

  • A. Water dispenser paddle
  • B. Water dispenser spout
  • C. Ice dispenser paddle
  • D. Ice guide

TO DISPENSE WATER:

  1.  Press a sturdy glass against the water dispenser lever. Hold the glass close to the water dispenser spout to ensure that the water dispenses into the glass.
  2. Remove the glass to stop dispensing

IMPORTANT: The small tray at the bottom of the dispenser is designed to catch small spills and allow for easy cleaning. There is no drain in the tray. To empty and clean the tray, push down on the back of the removable tray and pull out.

TO DISPENSE ICE:
Ice dispenses from the ice maker storage bin in the freezer when the dispenser paddle is pressed. To turn off the ice maker, see the “Ice Maker and Storage Bin” section in the Owner’s Manual.
Before dispensing ice, select which type of ice you prefer by pressing the “Ice Type” button. The display screen indicates which type of ice is selected.

For crushed ice, cubes are crushed before being dispensed. This maycause a slight delay when dispensing crushed ice. Noise from the ice crusher is normal, and pieces of ice may vary in size. When changing from crushed to cubed, a few ounces of crushed ice will be dispensed along with the first cubes.

  1. Make sure the desired type of ice is selected.
    WARNING
    Cut Hazard
    Use a sturdy glass when dispensing ice.
    Failure to do so can result in cuts.

  2. Press a sturdy glass against the dispenser lever. Hold the glass close to the ice guide to ensure that the ice dispenses into the glass.
    IMPORTANT: You do not need to apply a lot of pressure to the paddle in order to activate the ice dispenser. Pressing hard will not make the ice dispense faster or in greater quantities.

  3. Remove the glass to stop dispensing

Pizza Pocket Assembly

Whirlpool-WRS325SDHB-Side-By-Side-Water-and-Ice-
Dispenser-3

Assembly Instructions

  1. OInsert three hooks on part “A” into their corresponding slots on part “B”. Ensure the hooks fit into the side opposite to the upper lip.

  2. Assemble parts A and B at angle 90°.
    NOTE: Do not exceed angle more than 90°.

  3. Place the assembly onto the studs on the liner wall.

Application Overview

Whirlpool-WRS325SDHB-Side-By-Side-Water-and-Ice-
Dispenser-7

®/™ ©2021 All rights reserved. Used under license in Canada.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Whirlpool User Manuals

Related Manuals