BOSCH SMV2ITX48E Dishwasher User Guide

BOSCH-SMV2ITX48E-Dishwasher-product

Product Information

The product is a dishwasher that offers various features and settings for efficient and convenient dishwashing. It can be connected to a mobile device using the Home Connect app, allowing users to control and change settings remotely. The dishwasher has a water softening system and dispensers for special salt, rinse aid, and detergent. It offers multiple programmes with different durations, energy consumption, and water usage. The dishwasher also has filters that need to be cleaned regularly for optimal performance.

FAQ

• Q: Can I control the dishwasher using my mobile device?
  • A: Yes, you can connect your appliance to a mobile device using the Home Connect app.
• Q: How do I set the water hardness?
  • A: Press the specified button to access the appliance settings. Press the button repeatedly until the desired water hardness setting is displayed, then save the settings by holding the button.
• Q: When should I add special salt?
  • A: Only add special salt to the dispenser just before starting a programme to avoid damage to the appliance.
• Q: Can I add detergent to the dishwasher before loading the tableware?
  • A: Yes, add the specified amount of detergent to the dry detergent dispenser before loading the tableware.
• Q: How do I cancel a programme?
  • A: Press and hold the specified button for approximately 4 seconds to cancel a programme.

Product Usage Instructions

Setting up Home Connect

To connect your appliance to a mobile device:

1. Install the Home Connect app on your mobile device and follow the instructions.
2. Scan the QR code with the Home Connect app.

Overview of Water Hardness Settings

To set the water hardness:

1. Press the appropriate button.
2. To open the appliance settings, press and hold the specified button for 3 seconds.
3. Press the button repeatedly until the desired water hardness setting is displayed.
4. To save the settings, press and hold the specified button for 3 seconds.

Adding Special Salt

To add special salt to the dispenser:

1. Unscrew the lid of the dispenser for special salt and remove it.
2. On initial start-up, fill the dispenser with water.
3. Add the special salt to the dispenser. Do not add detergent.
4. Place the lid back on the dispenser and turn it to close.

Adding Rinse Aid

To add rinse aid to the dispenser:

1. Press the catch on the lid of the dispenser for rinse aid and lift it.
2. Add rinse aid up to the maximum mark.
3. Close the lid of the dispenser for rinse aid until it clicks into position.

Adding Detergent

To add detergent to the detergent dispenser:

1. Add the specified amount of detergent to the dry detergent dispenser.
2. Close the lid of the detergent dispenser until it clicks into position.

Using the Appliance

1. Load the tableware, ensuring it is suitable for dishwashers and free from large food remnants.
2. Add detergent to the dishwasher.
3. Switch on the appliance.
4. Select the desired programme.
5. Start the programme.
6. Remove the tableware at the end of the programme.
7. To cancel the programme, press and hold the specified button for approximately 4 seconds. The programme will be cancelled and end after approximately 1 minute.

Cleaning Filters

1. After each wash, check the filters for residue.
2. Turn the coarse filter anticlockwise and remove the filter system.
3. Pull down the micro filter to remove it.
4. Press the locking catches together and lift them.

Before using for the first time, read the instruction manual and the safety information it contains.

Settings

Setting up Home Connect

Tip: Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect app.

1. Install the Home Connect app on your mobile device and follow the instructions.
2. Scan the QR code with the Home Connect app.

Overview of water hardness settings

You can find an overview of the water hardness values that can be selected here. A table of country-specific units can be found in the instruction manual.

Setting the water softening system

1. Press ⁠.
2. To open the appliance settings, press Setup 3 seconds for 3 seconds.
3. flash.
4. Press Start repeatedly until the right water hardness has been set. 0, 1, 2 or 3 LEDs will light up accordingly.
5. To save the settings, press Setup 3 seconds for 3 seconds.

Programmes

The program data has been measured in the laboratory according to European standard EN 60436. The consumption figures depend on the programme and additional function selected. The running time will change if the rinse aid system is switched off or rinse aid needs to be added.

Overview

Adding special salt

To avoid damage to the appliance, only add special salt to the dispenser for special salt just before the programme starts.

1. Unscrew the lid of the dispenser for special salt and remove.
2. On initial start-up: Fill the dispenser right up with water.
3. Add the special salt to the dispenser. The water in the dispenser is displaced and forced out. Never add detergent.
4. Place the lid back on the dispenser and turn to close.

Adding rinse aid

1. Press the catch on the lid  of the dispenser for rinse aid 1 and 2 lift ⁠.
2. Add rinse aid up to the max mark.max
3. Close the lid of the dispenser for rinse aid. a The lid clicks into position.

Adding detergent

1. Add the detergent to the dry detergent dispenser.
2. Close the lid of the detergent dispenser. a The lid clicks into position.

How to use

How to use your appliance

Load the tableware. Only clean tableware that is suitable for dishwashers. Remove large remnants of food from the tableware. Check that the spray arms can rotate freely.

1. Add detergent.
2. Switch on the appliance ⁠
3. Select the program.
4. Start the program ⁠. Start
5. Remove the tableware at the end of the program.
6. To cancel the program, press for approx. 4 seconds.
7. The program is canceled and ends after approx. 1 minute.

Cleaning

Cleaning filters

1. After each wash check the filters for
   residue.

2. Turn the coarse filter anticlockwise and remove the filter system ⁠.

3. Pull down the micro filter to remove

4. Press the locking catches together and lift the coarse filter out ⁠.

5. Clean the filter elements under running water.

6. Re-assemble the filter system.

7. Insert the filter system into the appliance and turn the coarse filter clockwise. Make sure that the arrow markings match up.

Cleaning spray arms

1. Unscrew the upper spray arm 1 and pull down to remove ⁠2.
2. Pull up the lower spray arm to remove.
3. Check the outlet nozzles on the spray arms for blockages under running water and remove any foreign bodies.
4. Insert the lower spray arm.
   • The spray arm clicks into position.
5. Insert the upper spray arm and screw it firmly in place.

Clean wastewater pump

1. Disconnect the appliance from the power supply.
2. Remove the filter system.
3. Scoop out any water.
4. Prise off the pump cover using a spoon and grip it by the crosspiece.
5. Lift the pump cover inwards at an angle and remove.
6. Remove any remnants of food and foreign bodies in the area of the impeller.
7. Insert the pump cover 1 and press down ⁠2.
   • The pump cover clicks into position.

Troubleshooting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>