HUABULUO HZ005 Flame Air Aroma Diffuser Humidifier Instruction Manual
- June 14, 2024
- HUABULUO
Table of Contents
- HUABULUO HZ005 Flame Air Aroma Diffuser Humidifier
- Instructions for use
- The key controls lighting and humidifying aromatherapy
- Product structure drawing
- Technical specifications
- Precautions and maintenance
- Common faults and troubleshooting methods
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HUABULUO HZ005 Flame Air Aroma Diffuser Humidifier
Instructions for use
- Open the shell and prepare to add water.
- The water filling position needs to be filled according to the designated position.
- The maximum water volume is 180ml, or it cannot exceed the indication line of the maximum water level, otherwise it will affect the atomization effect or cause water leakage and cause damage to the machine.
- Plug in the attached power cord, Type-C, 2A. If you use a substitute power cord, you must pay attention to the current specification of 2A, otherwise it will affect the atomization effect.
- Pay attention to the optional power adapter, its output current cannot be lower than DC5V 2A, otherwise it will affect the atomization effect.
The key controls lighting and humidifying aromatherapy
The right button Illumination function:
- Short press the button, the default light will change gradually;
- Short press again, the first is flame color;
- Short press again, the second is blue;
- Short press again, the third is purple;
- Short press again to turn off the lights.
Left button
The function of aromatherapy humidification:
Add water to the water tank (cannot exceed the water level); Add 2-3 drops of
essential oil or no essential oil;
Cover the upper shell and press the atomization switch button to open the
humidification function;
Short press again to stop working;
Product structure drawing
Technical specifications
- Rated voltage: DC5V
- Rated power: 10W
- Water tank capacity: 180mL
- Atomization volume: 25-35mL/hr
Precautions and maintenance
- After use, the remaining water in the water tank must be poured out, so as to make your atomization to achieve the best maintenance effect.
- Note that pouring water needs to follow the instructions otherwise, it will damage the atomizer.
- Please use pure water, so that your atomizer will not be damaged due to impurities in the water, so as to achieve the best maintenance effect.
Common faults and troubleshooting methods
Symptom | Possible Causes | Approach |
---|
After pressing the left and right buttons, Humidifier light off Can’t start, no
fog| lmproper connection of the adapter| Connect the cable and press the
switch button again
The light is on, press the humidification function button on the right,the fan
rotates, and there is no fog| The water tank is short of water or too little
water| Add purified water
The light is on, press the humidification function button on the right, the fan
rotates, and there is no fog| There is scale i the water tank, the added water
has impurities, or the water is left for too long| Pour out the water in the
water tank, clean the water tank and place it in a cool place for ventilation
More than 12 hours, then re-add purified water
The light is on, press the humidification function button on the right, the fan
rotates, and there is no fog| The water in the water tank is too full| Pour
out a little water and close the lid tightly
Too little fog| There is dirt on the atomizingfilm, or the water in the water
tank is left for too long| Clean the water tank and add pure water
Noisy| Too little water and the humidifier is tilted| Ensure the amount of
water, place the humidifier in a clean place, and require the base to lie flat
※lf the above methods cannot be improved, please contact the after-sales
service team, we will provide you with satisfactory service。