EGQINR HD11 Smart Watch with Bluetooth Call User Guide

EGQINR HD11 Smart Watch with Bluetooth Call

OVERVIEW

1. Open the package and take out the watch
2. Wear the smartwatch, long press the knob button to turn it on
3. Scan the QR code with your phone to open the APP FitCloudPro on your phone to set up the device

CHARGE AND ACTIVATE

Align the magnetic charger with the magnetic hole on the back of the watch until it reaches the watch screen. When the charging prompt appears, please charge the watch in time when the power is low. The backup is an all-in-one machine, and the rear shell and battery cannot be removed.

BUTTONS AND TOUCH

SMART WATCH APP DOWNLOAD AND CONNECTION

1. Download the “FitCloudPro” APP on your mobile phone and install it. You can scan the QR code in this manual, or scan the QR code on your watch, or directly search for “FitCloudPro” in the APP mall to download
   Connect the smartwatch

2. Scan the QR code to connect: After the mobile phone turns on the Bluetooth, enter the APP (Note: If the APP cannot be opened, please turn on the positioning of your phone and then open the APP) Click on the device -> Click on ‘Add Device’ -> Click on ‘Scan QR Code Binding’ (scan the QR code on the watch).

3. Manual connection: After the mobile phone turns on Bluetooth, enter the APP.
   (Note: If the APP cannot be opened, please enable the mobile phone positioning function and then open the APP) Click ‘Device’ – Click ‘Add Device’ – Click ‘Search Device’ (Find the corresponding item in “Settings” →> “System” – “System Information” in the watch slid- ing control center name and MAC address of the device) -> Click ‘Connect’.

4. Connect to Bluetooth call: In the initial state of the watch, the Bluetooth call is turned off, and the call and music functions cannot be used at this time. Slide down to open the ‘Control Center’, click the ‘Headphone’ icon, turn on the audio mode, and then turn on the Bluetooth call in the mobile phone system (when the mobile phone’s Bluetooth is turned on/down), find the corresponding Bluetooth name, and click ‘Connect’. After the connection is successful, the call and music functions can be used normally.

INSTRUCTIONS FOR USE

1. Alipay interface: Double-click the screen on the dial page to enter the Alipay interface.

2. Dial interface: Long press the screen to enter the dial selection interface, swipe left or right to switch the dial, and click once after confirming the dial.
   (Note: The system presets 12 watch dials, the last dial is “customize”, this watch dial will change with the watch dial market updating of the APP port and the download settings of the custom watch dial)

3. Menu interface: On the dial interface, press the knob on the side to enter the menu interface. After entering the menu inter- face, press the lower knob twice in quick succession to enter the menu switching interface, and press it to return to the main interface.

4. Function interface: Click the application icon on the menu interface to enter the corresponding function interface, swipe right to return, and press the side knob to return to the main watch dial interface.

FUNCTION INTRODUCTION

• After the smartwatch is connected to the APP, you can set a single-mode alarm clock, a cycle mode alarm clock, and a maximum of 5 alarm clocks.
• Click the start button to start timing, click the pause button to pause the timing, and click the reset button to reset the timing to zero. Up to 99 pieces of data can be saved.
• There are 1-minute and 2-minute options for breathing training. The user clicks the corresponding duration to perform breathing training. After clicking start, follow the icons in the breathing training to zoom in and inhale, and zoom out and exhale.
• When entering the blood pressure measurement interface, the green light at the bottom lights up to start the test for 30-60 seconds, and there will be a vibration reminder when the measurement is completed. This measurement is a measurement based on PPG technology.
• After the device is connected to the APP, turn on the women’s health reminder on the APP, and you can view the women’s health reminder information on the watch.
• When entering the heart rate measurement interface, the bottom green light lights up to start the measurement, and there will be a vibration reminder when the measurement is completed in about 40 seconds. If it prompts “not wearing the watch”, you need to re-wear the watch.
• When entering the blood oxygen measurement interface, the green light at the bottom lights up to start the test for 30~60 seconds, and there will be a vibration reminder when the measurement is completed. This measurement is a measurement based on PPG technology.
• Scan the QR code with Alipay on your mobile phone to bind, and click “Agree to the Agreement and Bind” After the binding is successful, double-click the home screen to display the Alipay payment code, and you can also unbind. (Note: This function can only be accessed in Chinese and English languages)
• Currently, only unencrypted door cards with a frequency of 13.56MHZ are supported on the market.
• Options for sports mode: walking, running, cycling, mountaineering, swimming, yoga, elliptical machine, basketball, etc., click the icon to start the exercise interface.
• After the device is connected to the APP, the weather interface will display the real-time weather temperature and content.
• After the device is connected to the APP, open the relevant message push on the APP port, the device port can receive the corresponding message push and can save up to 15 recent messages.
• The functions of settings include screen display (switching dials, brightness adjustment of the screen time, turning the wrist to brighten the screen), language, vibration intensity, menu style, battery, OR code, and system.
• After the device is connected to the APP, it can control the pause and start of the mobile phone music player, adjust the volume, and switch songs.
• You can set the ‘Sedentary reminder’ to be turned on in the APP. After turning it on, you can set the start, and end times, and not disturb the time period.
• Display the sleep monitoring status of the day and the data is updated every day. When connecting to the APP, the data can be saved synchronously, and the device will recalculate the data information of the new day.
• Press and hold for 2 seconds on the main interface screen to enter the watch dial switching interface, slide left and right to switch the waiting watch dial, and click to select the watch dial.
• Display the number of steps, distance, and calories recorded on the day. You can set the target number of steps, distance, and calories in the APP.
• It can be turned on in the ‘Settings’ -‘ Drinking water reminder’ of the App. After turning it on, you can set the start, end time, and reminder interval.
• After the device is connected to the APP, click to find the mobile phone, the mobile phone will ring to indicate that the search is successful; if the watch is not connected to the APP, the watch will prompt that it is not connected.
• Overview of functions: Do not disturb, turn on the wrist to brighten the screen, brightness, settings, find mobile phone, power saving mode, and system information.
• In the timing function, the system presets the commonly used timing duration. Users can click the corresponding duration to quickly time the timing, or click the custom button to set the time.
• Click the start button to start the timing, click the pause button to pause the timing, and click the reset button to reset the timing to zero.

FREQUENTLY ASKED QUESTIONS

1. The watch cannot be turned on
2. Please press and hold the power button for more than 3 seconds or the battery may be low and need to be charged in time.
3. Bluetooth is not connected or cannot be connected
4. Please try to restart the watch and reconnect.
5. Please try to connect again after restarting your phone’s Bluetooth.
6. Do not connect the phone to other Bluetooth devices at the same time.
7. Hand measurement of heart rate/blood pressure/blood oxygen/ECG is inaccurate
8. During general measurement, the sensor of the watch is not in correct contact with the human body.
9. When measuring, please pay attention to the full contact between the sensor and the wrist.
10. For people with darker skin and more arm hair, please turn on “Enhanced measurement” in “Device” -Enhanced measurement in the App.
11. Sleep data is not accurate enough
12. Sleep monitoring is the state of simulating people’s self-recognized time to fall asleep and wake up, and needs to wear the device correctly.
13. If you wear it too late or when you fall asleep, there may be errors.
14. Sleep data is not monitored during the day, and the default sleep monitoring is from 9:30 pm to 12:00 noon the next day.

  * For more frequently asked questions, please check the App” My’ – >FAQ

BLUETOOTH DATA TRANSMISSION

• When connected to a mobile phone, the device will synchronize some data with the mobile phone through Bluetooth in time, in- cluding weather, notification messages, sports health data, etc.
• This data will not be synced when the connection is dropped or Bluetooth is turned off.

PRECAUTIONS

1. The measurement results of this product are only for maternity examinations, and are not used for any medical purpose or basis. Please follow the doctor’s instructions. Do not self-diagnose and treat with this measurement result.
2. The waterproof level of this product is IP68, and it cannot be used for diving / swimming or soaking in water for a long time; in addition, this product cannot be used in hot water /sauna environment, because water vapor will cause damage to the equipment.
3. The company reserves the right to modify the contents of this manual without prior notice. Some functions are different in the corresponding software version, which is normal.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>