EGQINR P88 Smart Watch User Guide
- June 13, 2024
- EGQINR
Table of Contents
EGQINR P88
Smart Watch
User Guide
Introduction
1. Charge and Activate
- Align the magnetic charger with the magnetic hole on the back of the watch until the charging reminder appears on the watch screen.
- Do not use a power adapter with a voltage exceeding 5V and an output current exceeding 1A for charging, otherwise it will cause charging failure and damage the magnetic charging cable and the device.
- When the watch is out of power and then charged, it needs to be activated first; the watch screen will light up after about 5 minutes of normal charging.
2. Appearance Description
Bluetooth Connection
W atch APP Installation and Connection Instructions
As a Bluetooth product, most of the functions of this product need to be
connected to a special APP for normal use, such as time display, call alert,
and message alert. For Android phones, please do not use Bluetooth to connect
and pair with the watch directly. Please scan the following QR code to select
the version suitable for your mobile phone system or enter main application
markets to download and install Glory Fit.
https://app.help-document.com/gloryfit/download/index.html
Device Connection
Before using the APP. please turn on the mobile phone Bluetooth and mobile
phone GPS positioning to obtain the mobile phone positioning permission. After
the connection is successful, it will prompt
“To pair with: P88” , please select pairing.
The watch connection operates as follows: Note:
- For Android users, the APP should obtain permissions and run backstage, otherwise it will affect the user experience.
- For systems below iPhone iOS 13, after connecting in the APP, you need to connect to the P88 for the second time in the Bluetooth settings of the mobile phone, and then you can make calls, play multimedia music and other functions.
3. Phone Permission Settings:
For iOS
Location: After it is turned on, the APP can obtain the localweather
conditions and synchronize it to your watch.
Contacts: After it is turned on, you can add frequently used contacts on
the APP and it will be synced to your watch for quick calls.
Photos: After it is turned on, you can choose any photo in your phone to
customize the watch face.
Blubetooth: After it is turned on, the APP can be ready for pairing
withthe watch.
Camera: After it is turned on, enter the remote camera function on
theAPP, and shake the watch to realize remote camera.
Siri & Serach: After it is turned on, you can use the watch to wake up
siri to perform quick operations.
Background App Refresh : After it is turned on, the system will updatethe
latest version of GloryFit synchronously.
Q:How to open these permissions?
- Enter 【Settings】
- Scroll down to find 【GloryFit 】 APP and click to enter
- Open Contacts, Bluetooth, Camera, Background App Refreshpermissions.
- Enter 【Location】, choose 【Always】, open【Premise Location】
- Enter 【Wireless Date】, choose 【WLAN &Cellulor Data】
- Enter 【Siri & Search】, open all permissions.
- Enter 【Wireless Date】, choose 【WLAN &Cellulor Data】
For android
- Enter 【Settings】
- Scroll down to find 【GloryFit 】 APP and click to enter the relevant permission setting page
- Enter 【Mobile data】, turn on 【Allow background data usage & Allow app while data saver on】
- Enter 【Battery】, turn on 【Allow background activity】
- Enter 【Notifications】, turn on 【Show notifications & App icon badges】
- Enter 【Permissions】, turn on 【Calender, Call logs, Camera, ect】, choose【Allow】
Q: Why are Android phones easily disconnected?
A：”GloryFit ” APP must be running in the phone so that the Bluetooth will not
be disconnected automatically. But the storage management of Android system
will forcibly turn off the APP, in order to prevent the GloryFit APP from
being killed by the system, please make the following 3 settings:
-
Background running permission setting
[long press] GloryFit → click [App information] → [Battery] → turn on [Allow background activity] to enable background protection settings. -
Battery optimization permission settings
[long press] GloryFit → click [App information] → [Battery] → [Optimize battery usage] → [All] → [Close] FitCloudPro App optimization button. -
Clean up protection permission settings
To prevent the App process from being closed, click the [Multitasking] button in the navigation bar (or slide and stay from the bottom of the screen) → [GloryFit ] → [Lock this application].
Function Description
Introduction to Watch Function
- Bluetooth connection status
- Call Bluetooth connection status
- Battery level
- Call Bluetooth switch
- Do Not Disturb Switch
- Mute switch
- Raise the hand to light the screen switch
- Brightness setting
- Watch Settings
- Date display
- Menu shortcut switch
- Watch information
- Find your phone
- Power saving mode
Main interface : Display the current time, date, steps and other information of the watch; Long press on the main screen to switch the main dial left and right, and click OK; Different dials display differently.
Steps: Display current steps, distance and calories of the watch.
Call function: Click the call switch. Open the phone settings – Bluetooth – search connection Bluetooth P88-xxxx to play mobile music or make/receive calls, etc.
Heart rate: Slide to this page and keep a while and automatically measure the current real-time dynamic heart rate. Connectable to APP to set real-time monitoring and view data records.
Blood oxygen : Slide to this page to stay, automatically start to measure the current blood oxygen data, vibration prompts the result; You can set timing monitoring and view data records in the APP.
Exercise: Click on the icon on this page to access the multiple sport modes option. Select a sport mode, click the ican to start, and side tight to pause or stop the sport.
Blood pressure: Slide to this page and keep a vehile and automatically measure the current blood pressure data and vibrate to indicate the result. Connect the APP to view the watch offting measurement data or online measurement synchronously.
Steep: The bracelet can record and display your sleeping time last night, and the time of deep sleep and light sleep. More detailed data can be viewed synchronously in the APP.
Weather: Display the local weather conditions. Connect the synchronization APP for normal use, and open the phone GPS to ensure that the APP gets the pasitioning permission function and Network connection.
Music: The watch can control the mobile phone player to play music, This function needs to open the music player and keep the connection with the APP.
information : The watch can receive information notificabon from the mobile phone. This function needs to open the corresponding function and keep the connection with the APP.
Breathing training: You can choose different breathing patterns and time to start training.
Respiratory sate : Click the icon to enter the function to automatically test the respiratory rate, and the result will be prompted after the vibration,
Alarm clock: You car set eight alarm clocks at different times,
Voice assistant: After connecting the phone with Bluetooth, you car tap
the screen to wake up the voice assistant,
Stopwatch: Click on the icon to start the function, and click Start for
timing, pause or reset. Slide right to leave.
Search: Click this icon, your phone will beep to indicate the orientation
of your phone, this function requires your phone to stay Connected with the
watch APP. No alert on the phone in silent mode.
Remote control photo taking: Open the phate taking function in the app,
and the watch can be shaken or tauch the screen Control photographing,
Sattings: You can set the watch language, brightness, sound, power off,
restore factory settings, and view watch system information.
Precautions
- No charging with water stains.
- This product is an electronic monitoring product, not for medical use,and the measurement data is for reference onty.
- It is not recommended to wear in hot water baths and longtimeswimming.
- Please charge with the matching charging cable.
- Please keep the charging interface on the back of the watch clean toavoid poor charging cantact.