isyoung BF002 Smart Bird Feeder with Camera Instruction Manual

Smart AI Recognition Bird Feeder

Product manual

Customer Support: service@isyoung.com

WARM TIPS

1. Keep the bird feeder and all accessories out of reach of children and pets.
2. Make sure the camera has been fully charged for the first time.
3. Please do not expose the camera lens to sunlight directly.
4. Please do not soak the bird feeder in water.
5. Please use 2.4 GHz WI-FI to connect the application.
6. Please stay away from the strong light when pairing.
7. Please keep the board feeder within the range of WI-FI signal.

WHAT’S IN THE BOX

| |
---|---|---
Bird feeder| Perch|

Bird feeder bracket

| |
Drill Sticker| Screw for top cover*2|

Bracket connector

| |
Screw3| Green screws spacers 4|

Screw for bracket *4

| |
Pin| Waterproof rubber|

Screw for perch*2

Charging cable

SPECIFICATIONS FOR BIRD FEEDER

SOLAR PANEL SPECIFICATION
IPCE| 19%
Working Voltage (Vmp)| 5V±5%
Working Current (Imp)| 400mA±5%
Open Circuit Voltage (VOC)| 7.2V±5%
Short-Circuit Current (ISC)| 480mA±5%

INTRODUCTION FOR BIRD FEEDER

1. Bird Feeder Cover
2. Bracket
3. Perch
4. Camera
5. Solar Panel

INTRODUCTION FOR CAMERA

(1) Indicator Light
(2) Infrared LED
(3) Microphone
(4) Motion sensor
(5) Light sensor
(6) Lens
(7) Mounting hole
(8) Speaker
(9) Power ON/OFF
(10) Sync/Reset
(11) Charging port
(12) TF card slot (Capacity expansion 128G)

INDICATOR LIGHT

1. Camera turn on: Red light always ON.
2. Pairing mode: Red light fast blinking.
3. Network connecting: Green light fast blinking.
4. Network connected: Green light always ON.
5. Abnormal status: Red light slow blinking.(Need to reset)
6. During firmware update: Yellow light always ON.
7. Charging status: White light always ON during charging and OFF after fully charged.

HOW TO CONNECT TO THE APP

Download or scan the QR code and install the Bird Lover App for either IOS or Android. Once downloaded, the APP will prompt you to register your device. Enter your phone number or email address which one makes you feel comfortable and select the country you live in. You will receive the registration code. Input the registration code, then create a password.

1.Turn on the camera power and you will see the indicator light flashing quickly and hear a sound.

2.Open the App and follow the steps below to start the connection.

3.You need to enter the right Wi-Fi password for the first-time connection.

4.Scan the QR code with the camera. You will hear a prompt sound after a successful scanning.

NOTE: The QR code needs to be aimed at the camera below

5.Wait for the connection to complete, then click “Done”.

APP INTERFACE INTRODUCTION

1. Quality adjustment: you can choose HD or SD
2. Battery Remaining Capacity
3. Voice switch
4. Zoom in the screen for camera
5. Screen horizontal and vertical adjustment
6. Take photo
7. Bird recognition
8. Shot videos
9. Playback for previous
10. View photos or videos took
11. Check out the bird collection
12. Share the device
13. Motion detection(Click to turn on/off)
14. Device Volume
15. One-Way Talk
16. Siren
17. Notification for motion detection
18. Cloud storage service
19. History for bird recognition
20. Back to all function interface

HOW TO INSTALL

1.Stick the sticker on the tree or wall and drill holes within the range marked on the sticker.

2.Insert the green plastic screw spacers into the hole.

3.Fix the bracket with long screws.

4.Install the bird feeder and align the three holes underneath.

5.Fix bird feeder with three short screws.

6.Install the perch with the two screws in the package.

7.The bird house can rotate left and right.

HOW TO CHARGE THE CAMERA

(1) Rotate the camera down.
(2) Connect the solar charging cable.
(3) Or remove the camera and charge it with the charging cable.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>