YaberAuto YA60 Jump Starter Power Pack User Guide

YaberAuto YA60 Jump Starter Power Pack

Specifications

• Model: YA60 Car Jump Starter
• Input Port: USB Type-C (PD45W Max)
• Output Ports:
  • USB1 Out Port: 5V/3A, 9V/2A, 12V/1.5A
  • USB2 Out Port: 5V/3A, 9V/2A, 12V/1.5A
  • DC Out Port: 15V/10A, Max 150W
  • EC5 Out Port
• LCD Screen: Displays battery power percentage and current input/output power

Product Usage Instructions

1. Connect the included USB-C charging cable to the jump starter.
2. Short press the ON/OFF button to turn on the jump starter and view the remaining battery power and current on the display.
3. Note : The screen will turn off when the jump starter is fully Unplug the charging cable when not needed for charging.

Note

1. The wall adapter is not supplied, but you can charge the jump starter with the wall adapter that comes with your smartphone.
2. For PD45W fast charging, use a PD45W adapter or PD45W car charger.

Powering Your Devices

1. Connect your iPhone, smartphone, or other device to the jump starter using a USB charging cable.
2. Press the ON/OFF button to turn on the jump starter and view the remaining power on the screen.
3. When not charging other devices, unplug the charging cable.

Note
When charging multiple devices, the default output is 5V and the total output power should not exceed 18W.

Know Your Product

1. ON/OFF Button
2. In/Out Port (PD45W Max)
3. USB1 Out Port (5V/3A, 9V/2A, 12V/1.5A)
4. USB2 Out Port (5V/3A, 9V/2A, 12V/1.5A)
5. DC Out Port
6. (15V/10A, Max 150W) EC5 Out Port
7. BOOST Button
8. LCD Screen

1. Battery Power Percentage

2. Current Input/Output Power

3. Alarm Prompt

4. BOOST Means Ready to Start the Vehicle

5. DC Output

6. USB-C Input/Output USB Output

7. Output

8.  Input

9. Battery Jumper Cable USB-C / USB-A

10. Charging Cable

11. DC Cigarette Lighter

Charging Your Jump Starter

1. Please use the included USB-C charging cable to charge the jump starter.
2. Short press the ON/OFF button. You can know the remaining battery power and current via the display when charging
3. Attention : When the device is fully charged, the screen will turn off.
4. Unplug the charging cable when it is not needed for charging.

Note

1. Please note that the wall adapter is not supplied, but you can charge it with the wall adapter comes with your smart phone.
2. When using the product for the first time, please make sure the product is fully charged.
3. To achieve PD45W fast charging, you need to equip it with a PD45W adapter or PD45W car charger.

Powering Your Devices

1. Connect the product to your iPhone, smartphone or other device via USB charging cable.
2. Press the ON/OFF button to turn on the product, and the screen will show the remaining power.
3. When the machine does not need to charge other devices, please unplug the charging cable.

Note
When using our product to charge two or more electronic devices, the default output is 5V charging, and the total output power is not more than 18W.

LED Light
Press and hold the ON/OFF button for 3s to turn on the light. Short press the ON/OFF button to switch modes in lighting, SOS, flashing, or turn off the light.

Jump Start Your Car

1. Connect Vehicle Battery.

2. Press the ON/OFF button and long press “BOOST” button for 3s until the LCD screen displays “BOOST”.
   Safety tips : Do not press the BOOST button until the vehicle battery is properly connected (red to positive and black to negative). Otherwise, it may damage the battery.

3. Start the vehicle engine

Note

1. This product is suitable for starting 12V vehicles (please make sure that the battery voltage of this product is >13V).
2. Use the original jumper cable to start the car. If the clamps or power cables are damaged, do not use this machine.
3. When using this product, please do not connect two clamps together. Otherwise, this product will be damaged.

Error Message/ Cause/ Solution

Specifications

Package Content

• YaberAuto Car Jump Starter (YA60) *1
• 12V Battery Jumper Cable *1
• USB-C Charging Cable *1
• USB-A Charging Cable *1
• DC Cigarette Lighter *1
• Storage Bag *

Maintenance

1. Do not use the product to start an already expanded car battery.

2. Please store the product in a cool, well-ventilated place.

3. Please hold the product carefully and gently so as to avoid dropping or hitting it repeatedly.

4. Do not disassemble or modify the product.

5. Do not use detergent to clean the product.

6. Do not place the product in a high temperature environment for a long time.
   The use temperature of this product is -4-140℉. The storage temperature of the product should not exceed 122℉.

7. Check the battery level of the product at least once every three months and recharge it in time.

8. Keep away from children and pets.

Trouble Shooting

• How can I turn off the product
• The product will automatically power off when it detects no load or when charging is complete.
• How long does it take to fully charge this product
• About 2 hours (PD45W charge), charged via the USB-C input port.
• What is the storage temperature of this product
• This machine is a lithium polymer battery with an operating temperature of -20-60ºC/-4-140ºF.
• If the ambient temperature is higher than 60ºC/140ºF, it may damage the internal structure of the battery and cause it to expand, resulting in a safety accident.
• So do not store this device in vehicles that are parked for long periods of time in hot weather.
• How do I know if the machine is properly connected to the vehicle
• If the jumper clamp is correctly connected to the vehicle battery, press the BOOST button,
• you will see the “BOOST” icon is displayed on the screen. If Alarm Prompt appear son the screen, it means the connection is incorrect, please check the error content.

Warranty

• If there is any problem or malfunction during use, please send your question and order number to our email.
• We will provide you a good after-sales service within 24 hours.
• Email : support@yaberauto.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>