VSVABEFV B0CMC44LSM 4G Wireless Router User Manual
- June 14, 2024
- VSVABEFV
Table of Contents
4G Wireless Router
User Manual
- pictures for reference only.
Interface description
- WAN interface: RJ45 wired network interface, can be used when LAN port, in the standard wireless routing mode, this port inserts wired broadband, can realize the function of wired to wireless.
- LAN interface: RJ45 wired net port, network line output, access terminal, can realize LTE network to switch cable function.
- DC power supply interface: DC adapter 12V-1A power input.
- Reset: Putin with a sharp object in the boot state, press this, Key for 5 seconds, the WIFI lamp will go out, the device will automatically restart, and the resetis successful.
- 51M card slot: self-resilient SIM card holder, suitable for ‘Standard SIM card (2FF), pay attention to the direction of the. SIM card gap when inserting the card.
Indicator light status description
| Name | State | Description |
|---|---|---|
| WAN | Flashing | The RJ45 interface is already connected and has data |
communications
Destroy| The RJ45 interface is not connected
LAN| Flashing| The RJ45 interface is already connected and has data
communications
Destroy| The RJ45 interface is not connected
WIFI| Bright| WIFI on, normal function
Destroy| WIFI off
NET| Bright| LT E data network connection was successful
| Red| No sim or No signal
| Destroy| No power input
PWR| Bright| Normal power input
Login Device
Connect device
You can connect your computer and modem under the below steps.
Connected by networkcable
Set the computer IP address, before accessing the Web Settings page.Itis
recommended that you set the computer to “automatically obtain IP address” and
“automatically obtain DNS server address”. The IP address is automatically
assigned by the router.If you need to specify a static IP address to the
computer.
The IP address of the computer should be set in the same subnet as the LAN
port IP address of the router (the router’s LAN port default IP address
is:192.168.10.1, The subnet mask is:255.255.255.0) .
Connected by WiFi
Detect the wireless network connection of the wireless router, Then click
the ‘connect’ button to establish the connection.
The WiFi Password is :12345678
Login Router
Next you will log on to the router Web Settings page.
Enter*192.168.10.1” in the Web browser address bar,,Enter the login user name
and password in the pop-up box.
The Password:admin then click the Login. Enter the router Web Settings page
After Enter, Goto Web Set Ul.then you can set and manage the modem
System Info
Display the working state of 4G network and WAN access, so as tojudge whether the device has been connected to the network.
Wireless Setting
Setthe wireless related functions of the router, you can turn on or hide or change SSID wireless broadcast; Modify the WiFi password of the device, switch the WiFi channel, and turn on or off the relay of the device.
Network Setting
After the SIM card is inserted into the router, the system wil automatically
identify the 3G J 4G network. You can also define.
the network operator parameters you need to select, such as APN and VPN
System Admin
Password management
The default password of the wireless router is admin, the user name is not
modified, and the password can be modified. To be on the safe side, it is
recommended to change the password and keep the password information
Restore factory settings
The wireless router will be restarted during setup.
‘The restore (o factory Settings will clear all Settings for the wireless
router and revert to the iniial state. This function is commonly used in
equipment from one to another network environment of different network
environment, the restoration of equipment to factory Settings, and then to
reset, in order to more suitable for the current network.Click
<Backup/Restore> button, confirm and restore factory Seltings.
Upgrade Funtion
- Save the router upgrade file 1o the local computer.
- Click on the >Firmware Upgrade > Local Upgrade bution to select the software that needs to be upgraded.
- Click the Local Upgrade > button to start the upgrade.
Advance Setting
Advanced settings mainly include port mapping, remote assistance servico, DMZ, static routing table and other professional functions.