Raritan HO7RNF Locking Outlets Instruction Manual
- June 13, 2024
- Raritan
Table of Contents
Raritan HO7RNF Locking Outlets
Product Information
The PDU HD BASIC 0U, 3 PHASE 16A is a power distribution unit designed for IT equipment in 19″ enclosures. It features 36 C13 outlets and 6 C19 outlets with a cable locking system to prevent unintended disconnection. The PDU has a maximum input current of 16A and a nominal output voltage of 230V. It is designed for data center applications and meets various safety and regulatory standards.
Product Usage Instructions
- Ensure that the input plug is securely connected to a power source.
- Connect the appropriate cords to the C13 and C19 outlets.
- Make sure the cables are mechanically locked into the sockets to prevent disconnection.
- If necessary, adjust the fixing brackets to mount the PDU in a rack. Use the included buttons or standard fixing brackets for mounting.
- Check the electrical diagram for proper earth connection.
- Take note of the dimensions and mounting solutions provided for reference.
- Comply with the applicable safety standards and regulations, including circuit breakers, industrial plugs, and electromagnetic compatibility.
- Ensure that the PDU is stored and operated within the specified temperature and humidity ranges.
For more detailed information, please refer to the product’s technical data sheet: FT-NX1-BHD3100-EN-00.
KEY FEATURES
- NX1 PDUs provide electric power for IT equipment in 19” enclosures.
- They have been designed with specific features for Data Center applications.
- Each C13 and C19 outlets are numbered and equipped with a cord locking (100 Newton retention force).
- The circuits of the 32A PDUs are equipped with hydraulic magnetic circuit protection. Hydraulic magnetic circuit breakers are not affected by ambient temperature.
- High ambient temperature rating: 55°C
- Easy installation thanks to 330° rotating cable input and button-type brackets
INPUT
| Input Plug | IEC 60309 16A 3P+N+E |
|---|---|
| Cord Length | 3m – 9.84 ft |
| Cord Entry | Rotating (330°), bottom front |
| Cable Type | HO7RNF 5G2.5 LSZH |
| Maximum Input Current | 16A |
| Nominal Input Voltage | 400V, 3-phases |
| Rated Input Voltage | 346-415V |
| Input Frequency | 50/60Hz |
| Power Capacity | 11.1kW at 400V |
OUTPUT
| Nominal Output Voltage | 230V |
|---|---|
| Outlet type | 36 C13 + 6 C19 |
| Cord locking system | Yes |
| Cord Retention | 100 N |
| Circuit breakers | No |
| Circuit breakers type | No |
Cable locking system on C13/C19 sockets
- The cable is locked mechanically into the socket to prevent any unintended disconnection (caused by maintenance, vibrations, etc.). Pull-out force 100 N
- This universal solution is compatible with any standard compliant cord type on the market.
MECHANICAL FEATURES
- Casings: 6060 T5-R19 natural anodised aluminium
- Outlet modules:
- PC/ABS
- CW507L (CuZn 36) brass
- Fixing brackets:
- DC01-A-m galvanised steel
| Color | Aluminium grey (casing) / black (outlet modules) |
|---|---|
| Casing | Zero-U, aluminium |
| IP | 20 |
| IK | 04 |
ENVIRONMENTAL CHARACTERISTICS
| Storage and transport tempe- rature | -20 to +70°C |
|---|---|
| Operating temperature | +5°C to +55°C |
| Operating Relative Humidity | 5% to 95% |
| Operating Elevation | 0 – 2000 m |
ELECTRICAL DIAGRAM
DIMENSIONS
MOUNTING SOLUTIONS
INCLUDED
Delivered with 2 different sets for mounting in a rack.
Set of 2 buttons
Screwless fixing. The height of the fixing centre can be set at any point
along the full height of the PDU by sliding the button slots into the groove
on the rear of the PDU. Tightened using a screwdriver.
Button dimensions
Set of 2 standard fixing brackets
Screw-fixing (screws not included)
Fixing centres (min.-max.) with standard brackets : 1125mm -1145mm
Dimensions of standard fixing brocket
OPTION
Brackets for Nexpand racks
- Screw-fixing (2 screws included)
- Ref. 981227 Set of 2 brackets (for 1 PDU)
- Ref. 981228 Set of 20 brackets (for 10 PDUs)
Dimensions of NEXPAND fixing bracket
STANDARDS AND REGULATIONS
STANDARDS
| Application | Standards |
|---|---|
| Safety | IEC 62368-1 |
| C13 and C19 connectors for electrical equipment | IEC 60320-2-2 |
IEC 62368-1
Circuit breakers| Not Applicable
Industrial plugs| IEC 60309-1
Information and communication technology equipment| IEC 62368-1
Electromagnetic compatibility| EN 62311 (2008) EMF
EN 50491-5-2
EN 50491-5-3
EN 55035
EN 55032
EN 61000-4-11
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-3-2
REGULATORY APPROVALS
CE, UKCA, CMIM RoHS directive (Restriction of Hazardous Substances). REACH
regulations (Registration, Evaluation, Authorisation & restriction of
CHemicals).
Technical data sheet: FT-NX1-BHD3100-EN-00
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>