kidwell ROTRAXE01A0, ROTRAXE02A0 AXEL Tricycle User Manual

: June 3, 2024
: kidwell

Table of Contents

ROTRAXE01A0, ROTRAXE02A0 AXEL Tricycle
SPECIFICATIONS
PRODUCT COMPONENTS
ASSEMBLY AND DISASSEMBLY
OBSŁUGA, REGULACJE
CLEANING AND MAINTENANCE
ENVIRONMENT
LIMITATIONS OF WARRANTY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

www.kidwell.eu
AXEL
TRICYCLE
MODEL: ROTRAXE01A0, ROTRAXE02A0

ROTRAXE01A0, ROTRAXE02A0 AXEL Tricycle

Dear Customer!
Thank you for choosing Kidwell,
Our highest priority is the safety of your child and the creation of beautiful memories.
We hope you will enjoy our product, in case of any questions please contact us at: info@kidwell.eu
Please read through the entire manual carefully and follow all instructions. Before you start using our product make sure that all of the features are working as intended and are secure (fasteners, nuts, bolts, screws, etc.). The assembly must be performed by an adult. Failure to comply with the instructions and safety warnings could result in serious injuries.
IMPORTANT: Remove and dispose of all of the packaging materials which were included with the product; and keep them out of children’s reach to avoid the risk of harm.
IMPORTANT: Product for self-assembly

IMPORTANT!
KEEP FOR FUTURE REFERENCE

WARNING:

To avoid injuries, ensure that the child is kept away at a safe distance when assembling the product
Never leave your child unattended
The product is intended for a child over 18 month of age and a maximum weight of 25 kg
Use protective measures (helmets, gloves, knee and elbow pads, appropriate shoes)
Do not use in traﬃ c
For use under the direct supervision of an adult
The toy must be used with caution, as it requires appropriate skills to avoid falls or collisions causing injury to the user or third parties
When using the toy, make sure that the child has the necessary skills to use the bicycle safely.
For full safety, a child riding a bicycle should be equipped with a helmet, protectors including on the knees and elbows pads, and should have tightly tied shoes to prevent them from slipping oﬀ the foot
Do not use the bicycle if any part is damaged or missing
Before use, check that all components are properly attached
Do not use accessories or spare parts other than those recommended by the manufacturer
The bicycle is intended for one person and should not be used by more than one child at the same time
The toy should be used on a ﬂ at surface, without any obstacles, away from stairs
Always check if all parts ﬁ t accordingly to the manual
Regularly check the product for any damaged parts, condition of elements and if all of the of screws, fastening bolts and nuts, etc. are properly tightened and secure
Do not add items to the product that may endanger its proper functioning or objects that could pose a threat to the child
If any damaged parts have been found, immediately stop using the product and place it out of the child’s reach until the bike is repaired
All assembly elements must be properly attached, and particular attention must be paid to elements such as screws, fastening bolts, and nuts, etc.
Do not use the product for other purposes than for those that it was designed
Do not use the bike on roads with traﬃ c, or any other roads with motorized vehicle travel and in places posing a threat to the health and life of the child. Do not use the bike on slopes, in proximity to swimming pools, on stairs, etc.
Do not use the product on wet, slippery, sandy, gravelly, etc. surfaces that may create the risk of the child losing balance
Do not use the product after dark, in foggy conditions or in any other weather conditions that limit visibility
Do not leave the product exposed to weather conditions such as rain, snow or high temperatures
For safety reasons, it might be needed to equip the bike with additional elements such as bike lamps, reﬂ ectors, etc.

SPECIFICATIONS

Stable and durable steel frame
3 point harness
Rotating seat
Freewheel function
Folding canopy
Durable EVA tires
Soft guardrail with opening function
Pull-out footrest
Non-slip handles

PRODUCT COMPONENTS

1 Frame
2 Fork
3 Front wheel
4 Handlenbar
5 Fender
6 Parental handle
7 Seat
8 Canopy| 9 Shopping basket
10 1Small basket
11 1Bottle holder
12 1Rear wheels
13 Mounting screw for the shopping basket
14 Shopping basket nut bolt
15 Metal ﬂ at washers
16 5 mm Allen key
17 Mounting screw for the seat
---|---

ASSEMBLY AND DISASSEMBLY

FRONT WHEEL
a. Mount the wheel in the front fork while applying both plastic mountings to the fork tips until they lock.
b. Put the plastic fender on the combined front wheel with the fork in such a way that its shorter part in relation to the fork axis is directed in accordance with the spring button.
c. Place the combined front wheel with the fork and the fender in the front of the tricycle frame while pressing the spring button. Make sure that the button is in the opposite direction to the direction of travel.
d. Push the fork until it locks into the frame. When correctly mounted, the front wheel with the fork cannot be removed from the frame without ﬁrstly pressing the release button.
REAR WHEELS
a. Place the metal ﬂ at washers on the rear wheel bushings.
b. Place the rear wheel bushings with the previously mounted washers in the holes of the tricycle frame until it a click could be heard. Wheels connected this way cannot be freely pulled out.
c. To remove the rear wheels, use the release buttons on the bottom of the frame.
HANDLEBAR WITH BASKET
a. Before installing the steering wheel, place a small basket on the front of the frame as shown in.
b. Install the handlebar, it should be facing forward , in the front of the tricycle frame until you hear the lock click.
c. Correctly installed handlebar joins the basket, the fork with the front wheel, and the tricycle steering mechanism together. The handlebar movement causes the front wheel and the parental handle to move at the same time.
d. To remove the handlebar use the button as shown.
SEAT
a. Place the seat on the mandrel (…) of the frame and tighten it with a screw located on the bottom of the mandrel (…) place the washer (…) on it ﬁ rst.
b. Using the included 5mm Allen key (…), carefully tighten the mounting bolt.
c. Unfold the backrest to the sitting position and lock it against self- folding with the switch on the back of the backrest (…), turning it into the vertical position.
CANOPY AND SHOPPING BASKET
a. Install the canopy in the clips located in the upper part of the backrest.
b. Place the shopping basket on the tricycle frame between the rear wheels, previously mounting the screw in it and holding it, tighten it from the bottom with the nut bolt.
PARENTAL HANDLE WITH BOTTLE HOLDER
a. Place the bottle basket in the hook at the top of the parental handle.
b. Mount the holder on the shaft of the parental handle until you hear the lock latch. Make sure that the bottle holder is facing forward.
c. Correctly mounted parental handle is locked and joint with the steering wheel and the front fork. This allows the tricycle to be guided and operated by the parental handle.
d. To remove the parental handle, press the release button and simultaneously pull the handle out of the stem.

OBSŁUGA, REGULACJE

The rear wheel brake enables independent locking of each wheel separately.
Engage the brake lock by lowering levers 1 and 2 (…) to lock the tricycle. To unlock the brake, raise both levers until you feel resistance.
The front wheel has the option of „free wheel”. „Free wheel” allows you to enable or disable the child’s self-riding ability. To switch between this function, use the button located at the front wheel axle (…).
The handlebar of the tricycle can be partially folded, which will reduce the size for storage or transport. To fold the handlebar, move the slider (…) up while folding the handlebar shaft (…).
In the central part on the bottom of the tricycle frame, there is a fold-out footrest. Move the slider (…) to unlock and lower the footrest, then unfold the plastic pads supporting the child’s feet (…).
The seat has the ability to rotate around its axis. To change the seat position, release the lock with the slider (…), at the same time rotate the seat until the lock engages. The turning mechanism allows the seat to be locked in two positions – forward and backward.
The backrest can be folded down to reduce the size of the tricycle. To do this, use the backrest switch (…) turn it horizontally and fold it
The child’s guardrail has an opening option for easy access to the tricycle seat. Press the (…) button in the center of the guardrail from the front, then disconnect the guardrail into left and right handle. Push them sideways to open, until you feel resistance (…).
The seat belts can be adjusted using the slider.
The canopy has a several adjustable levels that allows you to change at will the sun protection.
The parental handle can be adjusted in height. To adjust the height of the handle use the slider (…)

CLEANING AND MAINTENANCE

Clean only with the use of neutral detergents and warm water. The seat upholstery can be washed in a washing machine at a temperature not exceeding 30 °, use the program for delicate fabrics. Do not tumble-dry. Do not use strong detergents (e.g. bleach). Do not iron. Use a soft, damp cloth for cleaning.

Clean the bike with a soap and water solution with the use of a damp towel with that said solution.
Do not use strong detergents to clean the product.
Before using the bike, make sure all screws are correctly tightened
Use a silicone-based grease for moving parts. Use it only when its use is absolutely necessary
In the event of the excess of grease, remove it from the product with a clean cloth
To avoid friction of moving parts, which can damage the bike, make sure they are clean. Any remains of sand, dirt or dust might cause them not to work properly
When the product is not in use, it should be stored in a room free of moisture and away from too high temperatures
If replacement of individual elements is necessary, original parts or those approved by the manufacturer must be used
Frequent use of adjusting parts wears them out. When the components lose their properties, they should be replaced as soon as possible
Disassembling of the bike takes place in the reverse order of assembly

ENVIRONMENT

For environmental reasons, we kindly ask of the disposal of this product at a speciﬁ cally for this purpose designed disposal site which is in accordance with local legislations.

LIMITATIONS OF WARRANTY

The warranty does not cover destruction or loss of individual elements due to falling, abrasion, incorrect assembly and use which is not in accordance with the user manual.

Kidwell wsparcie techniczne
tel. 797 974 387
bok@kidwell.eu
info@kidwell.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format) >>

Download This Manual (PDF format)

Download this manual >>