Cricut EasyPress 2 Heat Press Machine User Manual
- June 14, 2024
- Cricut
Table of Contents
Cricut EasyPress 2 Heat Press Machine
- Specifications:
- Countdown timer
- Precise digital controls
- Comfortable handle
- 9 x 9 evenly heated plate
- Safety Base
- Auto shutoff after 10 minutes
Product Usage Instructions
- Welcome
- Hello, future iron-on pro. We’re so thrilled this Cricut EasyPress has found its way into your amazing hands.
- You inspired us with your passion for creating and challenged us with your creative need: crazy-simple iron-on transfers that last and last and last. So, here you go! We cannot wait to see what you make with the magic of iron-on.
- In the Box
- The package includes:
- Cricut EasyPress
- Countdown timer
- Precise digital controls
- Comfortable handle
- 9 x 9 evenly heated plate
- Safety Base
- Auto shutoff feature
- At a Glance
- The simple Cricut EasyPress controls are the secret to your iron-on success. To find the correct time and temperature settings for your specific iron-on project, refer to the included Quick
- Reference Chart. If you don’t see your project specifics listed, visit help.cricut.com/easypress.
- Set Temperature
- Press the Temp button, then adjust the value with the plus (+) and minus (-) buttons. To switch from Fahrenheit to Celsius, press and hold the Temp button.
- Set Time
- Press the Timer button, then adjust the value with the plus (+) and minus (-) buttons.
- What the Lights Mean
- An orange light means it’s heating up, while a green light means the temperature has been reached.
- Start Timer
- Press the Cricut C button to start the countdown. A beep will signal when the time is up.
- Make it Last
- Maximize the life of your iron-on projects wash after wash with these suggestions. For more tips and suggestions, visit help.cricut.com/easypress.
- Instructions
- We’ll take on a T-shirt in the following steps, but you capply these instructions to anything your heart desires, from a purse to a pillowcase … to a wedding dress?
- (Yes, it’s been done!) We want to see the projects you’ve made using Cricut EasyPress. Share your iron-on creations using #CricutMade &
- CricutEasyPress. Caution: It may be easy, but it’s also HOT. Handle EasyPress with care.
- Set Time and Temperature
- Use the Quick Reference Chart to determine the settings for your project. The beep signals Cricut EasyPress is ready to use.
- Get Prepped
- Power on Cricut EasyPress. Find a firm, flat, heat-resistant surface around waist height. We recommend that you use Cricut
- EasyPress Mat (pictured, sold separately) as your foundation. Just be sure to avoid flimsy, padded ironing boards.
- Position Your Design
- Place your design where you want it. Make sure the shiny side (clear liner) is facing up.
- FAQ
- Where can I find more information and support?
- For more information and support, visit help.cricut.com/easypress.
Welcome
- Hello, future iron-on pro. We’re so thrilled this Cricut EasyPress has found its way into your amazing hands.
- You inspired us with your passion for creating and challenged us with your creative need: crazy-simple iron-on transfers that last and last and last. So, here you go!
- We cannot wait to see what you make with the magic of iron-on.
In the box
- Cricut EasyPress
- Safety Base
- Welcome Booklet
- Quick Reference Chart
- Practice project materials
- Warranty
OVERVIEW
At a glance
The simple Cricut EasyPress controls are the secret to your iron-on success. You’ll love the results.
- TIP: To find the correct time and temperature settings for your specific iron-on project, refer to the included Quick Reference Chart. If you don’t see your project specifics listed, visit help.cricut.com/easypress.
Set temperature
- Press Temp button, then adjust value with plus (+) and minus (-) buttons. To switch from Fahrenheit to Celsius, press and hold the Temp button.
Set time
- Press Timer button, then adjust value with plus (+) and minus (-) buttons.
What the lights mean
- Orange light means it’s heating up.
- Green light means temperature has been reached.
Start timer
- Press the Cricut C button to start the countdown.
- A beep signals time is up.
Make it last
- Maximize the life of your iron-on projects wash after wash with these suggestions.
Before iron-on application
- For awesome results, always pre-wash and thoroughly dry your fabrics. When washing, do not use fabric softener.
- If you have no time for washing, you’ll still get pretty great results.
During iron-on application
- Just before transfer, preheat your base fabric for 3-5 seconds to remove wrinkles and moisture.
- After adhering to your design, flip your fabric and repeat on the other side. Use the same settings.
After iron-on application
- Wait at least 24 hours before washing. Always wash inside out.
- Do not bleach. Wash only in cool water, then tumble dry low or lay flat to dry. For foil iron-ons, hand-wash in cold water only.
- Get more great tips and suggestions at help.cricut.com/easypress.
Instructions
- We’ll take on a T-shirt in the following steps, but you can apply these instructions to anything your heart desires, from a purse to a pillowcase … to a wedding dress? (Yes, it’s been done!)
- We want to see the projects you’ve made using Cricut EasyPress. Share your iron-on creations using #CricutMade & #CricutEasyPress.
Caution: It may be easy, but it’s also HOT. Handle EasyPress with care.
-
Get prepped
Power on Cricut EasyPress. Find a firm, flat, heat-resistant surface around waist height. We recommend that you use Cricut EasyPress Mat (pictured, sold separately) as yourfoundation. Just be sure to avoid flimsy, padded ironing boards. -
Set time and temperature
Use the Quick Reference Chart to determine the settings for your project. The beep signals Cricut EasyPress is ready to use. -
Preheat mat and base material
Place Cricut EasyPress on your fabric for 3 – 5 seconds to remove wrinkles and moisture. -
Position your design
Place your design where you want it. Make sure the shiny side (clear liner) is facing up. -
Apply heat on both sides
Place Cricut EasyPress on your design. Start the timer. Hold Cricut EasyPress in place and apply gentle pressure until it beeps. Flip the T-shirt and apply heat on the back side of the design for 10 – 15 seconds. -
Wait … before the big reveal!
Let the iron-on film cool completely before you test a corner. If the liner does not lift easily, reapply and reheat a few more seconds. Woo-hoo, that’s it!
The Cricut Advantage
Crafting with iron-on is part art and part science. We’ve given you a basic foundation to create iron-on projects that truly last. When you’re ready for advanced projects we’ll be here for you then, too. On the next few pages are ideas designed to inspire your imagination.
- For the most magnificent results, use Cricut EasyPress with Cricut brand iron-on film.
- We don’t just suggest “average” temperature and time settings for any old heat press on any random fabric.
- We give you precise and rigorously tested settings for the very press that is now in your hand.
- Use our Quick Reference Chart to make every project perfect.
- Because each iron-on type has unique properties, you’ll be amazed at all the possibilities when you learn the nuances of a fabulous foil, gorgeous glitter, or majestic metallic.
- We’ll always share our insights, along with our best pro tips, at help.cricut.com/easypress.
Learn to love the “layer”
- Make a multicolored and textured masterpiece with an iron-on technique called layering.
- We’ll show you exactly how to do it and which iron-on types work best at help.cricut.com/easypress.
Yes, you can go big
- Indeed, you can have huge success with a large ron-on design! Get our step-by-step instructions on how to tackle your most ambitious ideas at help.cricut.com/easypress.
Think beyond fabrics
- Customize your home decor. Iron-on works on so many things, including wood and paper.
- Learn more at help.cricut.com/easypress.
It’s not always what it “seems”
- We have a simple strategy to get around pesky seams to keep your fabric and design flat for a perfect press.
- Learn how at help.cricut.com/easypress.
Cut your own designs
The real fun starts when you cut your own iron-on designs using your Cricut cutting machine and Design Space® software.
Before cutting, always mirror (reverse) your design.
- If your image includes text or is asymmetrical, you must mirror it in Design Space before you cut.
- Otherwise, once it’s transferred, your design will appear backward.
When cutting, remember this: shiny side faces down.
- When using your Cricut machine to cut a design from the iron-on film, the clear liner (shiny side) always sticks to your cutting mat.
Cricut machines and Cricut EasyPress are optimized for Cricut iron-on films.
- When you select your iron-on type, your Cricut machine automatically adjusts for cut depth.
- When you use Cricut brand iron-on film, you’ll get the perfect cut and a perfect press every time.
- Visit shop.cricut.com.
Time and temperature chart
Use this chart (or the Quick Reference Chart) to determine the perfect time and temperature settings for your project. For a complete list of Cricut EasyPress settings go to help.cricut.com/easypress.
Iron-on type| 100% Cotton| Cotton / poly blend| Polyester| Base material blend
or silk| Cotton canvas| Burlap| Felt
---|---|---|---|---|---|---|---
Foil| 295°F / 145°C
35 sec
| 285°F / 140°C
30 sec
| 265°F / 130°C
30 sec
| 255°F / 125°C
30 sec
| 270°F / 130°C
40 sec
| 305°F / 150°C
30 sec
| 275°F / 135°C
20 sec
Lite / Metallic| 305°F / 150°C
30 sec
| 305°F / 150°C
20 sec
| 285°F / 140°C
15 sec
| 265°F / 130°C
30 sec
| 270°F / 130°C
40 sec
| 305°F / 150°C
30 sec
| 275°F / 135°C
20 sec
Glitter| 340°F / 170°C
20 sec
| 320°F / 160°C
15 sec
| 285°F / 140°C
20 sec
| 275°F / 135°C
20 sec
| 270°F / 130°C
40 sec
| 305°F / 150°C
30 sec
| 285°F / 140°C
20 sec
Holographic| 330°F / 165°C
20 sec
| 330°F / 165°C
30 sec
| 285°F / 140°C
30 sec
| 275°F / 135°C
20 sec
| 275°F / 135°C
40 sec
| 305°F / 150°C
30 sec
| 285°F / 140°C
20 sec
Useful Links
-
help.cricut.com.
Answers to all your Cricut questions -
learn.cricut.com.
Educational videos, instruction manuals, and other learning materials -
cricut.com/blog.
News, announcements, tips, and inspiration -
youtube.com/officialcricut.
Instructional videos, news, and more -
facebook.com/officialcricut.
Join the discussion and connect with the Cricut community -
cricut.com/contact-us.
Live chat and email support
More questions? Find answers at help.cricut.com/easypress.
References
- Cricut blog » Cricut news, tips, tricks, inspiration, and how-tos
- Cricut Learn
- Welcome to Cricut: Unleash Your Creativity with Our Cutting Machines & More
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>