Cricut Auto press Mist Sewing Kits User Guide

Cricut Auto press Mist Sewing Kits Get to know your Cricut Auto press

1. Handle Indicator

2. Lights Orange = heating up

3. Green ready to use

4. Red machine locked or Control Pod disconnected

5. Heat Plate
   CAUTION: Gets very hot during use Pressing Mat Platen

6. Power Button

7. Lock/Unlock

8. USB Port

9. USB Cable

10. Power Port

11. Power Cord

12. Control Pod

Control Pod

• Preset Buttons: Press for 3 secs to save settings Temperature
• Set Temperature: Use dial to adjust
• Timer Starts when handle is pressed
• Set Time: Use dial to adjust
• Micro-USB Port: Connect machine cable C°/F°
• Toggle: Switch from Celsius to Fahrenheit

Use your heat press

Before using for first time, activate Cricut Autopress at cricut.com/setup. Follow on-screen instructions to set up press and connect to Design Space.

• Get time & temperature settings for your project at cricut.com/heatguide
• Position project on Pressing Mat (4)
• Use Handle (1) to lower heat plate
• Press handle to start timer

Note:

• Timer starts automatically Heat plate lifts automatically when complete
• Carefully remove project
  CAUTION: Heat Plate (3) gets very hot during use. Platen (5) may become hot during use. Handle with care. Read safety instructions before use.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>