COMMSCOPE EQP0810-DSH Heavy Duty Equipment Platforms Instructions
- June 14, 2024
- CommScope
Table of Contents
COMMSCOPE EQP0810-DSH Heavy Duty Equipment Platforms
UNPACKING INSTRUCTIONS & SAFETY INFORMATION
- Cautiously remove contents and layout parts on a protective surface to avoid damage
- Check supplied parts list against contents. Do not use damaged or defective parts.
- Read instructions before installation.
- Use proper safety equipment and protocol during installation.
- Please contact CommScope if you don’t understand provided directions or any doubts about the safety of the installation.
For any questions, please contact CommScope.
Do not use this product for any purpose or in any configuration not explicitly stated in this instruction. We here disclaim any and all liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product. Unauthorized use, reproduction, or distribution of this document is prohibited. For updated product specifications please visit www.commscope.com or email steelproducts@commscope.com. For patents, see www.cs-pat.com.
Supplied Parts List
| ITEM NO. | PART NUMBER | DESCRIPTION | QTY. |
|---|---|---|---|
| 1 | EQP0810-1100 | SIDE CHANNEL, EQUIPMENT PLATFORM | 4 |
| 2 | EQP0810-1200 | SIDE CHANNEL, EQUIPMENT PLATFORM | 2 |
| 3 | EQP0810-1300 | CHANNEL,SUPPORT CABINET | 2 |
| 4 | EQP0810-1400 | WELDMENT, ANGLE STEEL REINFORCEMENT | 8 |
| 5 | MTC7902081001 | 24” X 120” BAR GRATING | 4 |
| 6 | MTC390324 | BAR GRATING CLIP | 26 |
| 7 | TS1220 | 12-24 X 2” SELF DRILLING SCREW | 26 |
| 8 | MTC3823A01 | WELDMENT, IPDS FIXED FOOT | 4 |
| 9 | GB-05205 | 5/8” X 2″ GALV BOLT KIT | 44 |
| 10 | GB-03105 | 3/8” X 1” GALV BOLT KIT | 8 |
| 11 | GWF-05 | 5/ 8” GALV FLAT WASHER, 1.7OD | 88 |
NOTES:
General
- All metric dimensions are in brackets
- Parts marked with identification number
- For patent info: https://www.cs-pat.com
Manufacturing/Special Requirements
Tighten all bolts securing flat plates by the turn -of-nut method. Tighten all U-Bolts using turn-of-nut method with attention to leave equal distance and equal force on each leg of the U-Bolt.
Packaging
- Packaging shall meet Commscope requirements per document IS-PL-3005
- Extra hardware may be supplied bagged and shipped.
This detailed product information is intended for use by current CommScope customers, licensed distribution partners, and their contracted engineering firms for the purposes of analyzing and specifying CommScope products. Unauthorized use, reproduction, or distribution of this document is prohibited. For updated product specifications please visit www.commscope.com or email steelproducts@commscope.com. For patents, see www.cspat.com
STEP BY STEP ASSEMBLING INSTRUCTION
STEP 1: ASSEMBLE FRAME
STEP 2: ASSEMBLE GRATE
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>