momax CR3SD Smart Air Pump Instruction Manual
- June 14, 2024
- MOMAX
Table of Contents
momax CR3SD Smart Air Pump
Specifications
- Model No.: CR3S
- Input Pressure : 5V 2A
- Inflation rate : 3-150 psi / 0.2-10.3bar
- Noise : Not specified
- Battery : Not specified
- Charging time : Not specified
- Operation temperature : Not specified
- Size : Not specified
- Weight: Not specified
Product Information
The Smart Air Pump is a versatile IoT electric air pump designed for inflating car tires, bike tires, motorcycle tires, and balls. It features a preset air pressure function and the ability to measure air pressure accurately.
Product Overview
The Smart Air Pump comes with the following components
- USB-C Charging Port
- Storage Hole For Hose
- Hose Connector
- LED Light
- 160mm Air Hose
- Swimming Ring Nozzle
- French Air Nozzle Adapter
- Ball Needle
LED Control Panel
The LED control panel of the Smart Air Pump includes the following
indicators and buttons
- Measured Pressure
- Unit
- Preset Pressure
- Battery Level
- Touch Switch for LED ON/OFF & Unit Switch
- Modes
- Power ON/OFF
- Preset Minus (-)
- Preset Plus (+)
Charging
To charge the Smart Air Pump, follow these steps
- Connect the air pump to a power adapter using the provided USB cable.
- The battery indicator light will flicker to indicate that charging is in progress.
- When the green light is ON, it indicates that the charging is completed.
- Note : The product will stop operating during charging. Remove the air pump from the power supply when charging is completed.
Instructions for Use
Power ON/OFF
To turn on the Smart Air Pump, pull out the hose. To turn it off, push the
hose to the bottom. Note that the air pump will automatically turn off if idle
for 3 minutes or when the battery is low.
Modes
The Smart Air Pump offers 5 modes of operation
- Scene Mode (Reference Value: Adjustable range)
- Car Mode (Reference Value : 35 PSI, Adjustable range: 0-65 PSI)
- Motocycle Mode (Reference Value : 40 PSI, Adjustable range: 0-55 PSI)
- Bicycle Mode (Reference Value : 38 PSI, Adjustable range: 0-120 PSI)
- Custom Mode (Reference Value : 100 PSI, Adjustable range: 0-120 PSI)
- Ball Mode (Reference Value : 8 PSI, Adjustable range: 0-15 PSI)
Unit Switching
To switch the pressure unit, press the unit switch button on the LED
control panel.
Preset Pressure Value
To adjust the preset pressure value, press the preset minus (-) or preset
plus (+) buttons on the LED control panel. You can also hold down these
buttons to quickly adjust the value.
Hose Connection
When using the Smart Air Pump, connect the air pipe to the object you want
to measure or inflate.
Hose Storage
The hose can be stored in the storage hole provided. Simply put the thread
head of the hose inside the hole for convenient storage.
- Safety Precaution: When unscrewing the hose, be cautious as both the hose and the joint may produce high temperature due to long operation.
Measuring the Pressure
When the Smart Air Pump is turned on, connect the air pipe to the object
you want to measure, and the measured pressure value will be displayed on the
LED control panel in real-time.
Reset
If the measured value is not zero, you can reset it by pressing and holding
the preset key for 3 seconds. Note that you should not connect inflatable
objects when resetting.
FAQ
- Q: Where can I download the MOMAX Smart app?
- A: You can download the MOMAX Smart app from the iOS App Store, Android Google Play Store, or other platforms.
- Q: How do I connect the Smart Air Pump to my mobile device?
- A: Once you have downloaded the MOMAX Smart app, register an account and log in using your mobile number or email address. Follow the instructions in the app to complete the connection process.
- Q: Where can I find setup and support for the CR3S?
- A: You can visit helpdesk.momaxsmart.com for step-by-step setup and support. You can also watch the latest video tutorial to learn how to set up and operate your CR3S and stay up to date with the latest updates.
Quick Start Guide
- Download ‘MOMAX Smart’ APP
- Download “MOMAX Smart” from iOS App Store, Android Google Play Store or other platforms.
- Register
- Register an account and log in using your mobile number or email address.
- Wireless Pairing
- Take out the hose, CR3S automatically displays the operation screen. Switch on mobile phone of blue tooth connection, automatically search.
- Click “+”, then tap “MOMAX Smart Electric Air Pump” to add device. Then, tap ‘Next’ to proceed.
- The pairing process may take 3 minutes, please do not perform other operation.
- Successfully connected
- Once the connection is completed.
Find “CR3S” in MOMAX’s channel
- helpdesk.momaxsmart.com
- Get step-by-step setup and support.
- Watch the latest video tutorial to learn to setup and operate your CR3S.
- Keep up to date with the latest updates.
Product Overview
- USB-C Charging Port
- Storage Hole For Hose
- Hose Connector
- LED Light
- 160mm Air Hose
- Swimming Ring Nozzle
- French Air Nozzle Adapter
- Ball Needle
LED Control Panel
- Measured Pressure
- Unit
- Preset Pressure
- Battery Level Touch Switch
- LED ON/OFF & Unit Switch
- Modes
- Power ON/OFF
- Preset −
- Preset +
Charging
- Connect the air pump to a power adapter using the USB cable.
- The battery indicator light flickers when charging is in progress.
- When green light is ON, indicating the charging is completed.
The battery level indicator
- Green light : 60-100%
- Yellow light : 30-60%
- Red light : 0-30%
Note: The product will stop operate during charging.
Remove the air pump from the power supply when charging is completed.
Instruction for use
- Power ON/OFF
- Pull out the hose to turn ON.
- Push the hose to the bottom to turn OFF.
- Note : The air pump will automatically turn OFF if idle for 3 mins or when battery is low.
- Modes
- Press the “ “ button to toggle between 5 modes of operation.
- Unit Switching
- Press the “ “ to switch the pressure unit.
- Preset pressure value
- Press the “ “ button to adjust the value.
- Press the hold the “ “ button to quickly adjust the value.
- Hose connection
- Start inflation
- Press the inflation switch “ “ to start inflation. The display will show the real-time pressure value.
- Noise will be generated during inflation and the hose will be hot to touch during long operation. Be cautious when you touch the hose.
- Stop inflation
- Press the inflation switch “ “ to stop inflation manually. When the measured value “f” reaches the preset value “h”, it will auto-cut off.
LED lighting
- Press & hold the LED “ “ to turn ON.
- Press and hold “ “ again to turn OFF.
Hose storage
The hose can be stored in the storage hose. Put the thread head of hose inside
the hose.
- Safety Precaution : When the hose is unscrewed, the hose and the joint will produce high temperature due to long operation.
Measuring the pressure
When it is ON, connect the air pipe to the measured object, and the measured
pressure value “ f “ shows the real-time pressure value.
Reset
When it is ON, if the measured value is not zero, press the preset “ key for 3
secs at the same time to reset to zero.
Note : The difference may due to altitude or the sensor tolerance. Do not connect inflatable objects when resetting.
Specification
- Model No. : CR3S
- Input : 5V 2A
- Pressure : 3-150 psi / 0.2-10.3bar
- Inflation rate : 15-20 l/min
- Noise : <86db (1m)
- Battery : 2000mAh/7.4V (14.8Wh)
- Charging time : 2-3h
- Operation temperature : ~0°C – 60°C
- Size : 155 x 62 x 39mm
- Weight : 430g
Contains
- Smart Air Pump Iot Electric Air Pump With Flash
- 160mm Air Hose
- Ball Needle
- French Air Nozzle Adapter
- Swimming Ring Nozzle
- Storage Bag
- Usb-A To Usb-C Cable (1m)
- Instruction Manual And Warranty Card
Warnings
Points for attention
Before using, please read this user manual carefully and keep it for future
reference.
- Do not dismantle or modify the product;
- Do not store the product in wet conditions;
- Do not keep or use the product near heat sources;
- Do not let water or any other liquid flows into the inside part of the product’s interface. This would cause damages to the product;
- Avoid direct sunlight. Keep away from heat source;
- Avoid high processor load in long running loops or while charging;
- Ensure good ventilation while using;
- In case of overheating, stop using the product;
- Do not leave during inflation;
- Keep away from combustible and explosives;
- Avoid moisture, sand and fall;
- Not for children.
Service Agreement of
Smart Mobile Application Platform
Please reference Mobile Apps content : Before accepting the Agreement,
you are supposed to thoroughly read all the contents of the Agreement, and
fully understand its terms, especially restrictive clauses or exceptions and
Privacy Notice. Restrictive clauses or exceptions are bold or highlighted in
other forms to catch your attention. In case of any doubt about the terms of
the Agreement, please contact the relevant business department of Tuya. You
are not allowed to use the service before you have read and accepted all the
terms of the Agreement, relevant agreements, and rules, etc. Once you select
“agree and submit the Agreement” (see registration page for detailed wordings)
and complete the registration procedure, or you use the service in any form,
it will be deemed that you have read and agreed with the restriction of the
Agreement and rules above. In case of any breach of the Agreement, Tuya has
the right to unilaterally restrict, suspend or terminate the service for you,
and has the right to investigate your relevant responsibilities.
Disposal of Electronic Products
- Do not place the product as household waste;
- Please dispose of discarded electronic products properly according to local regulations;
- MOMAX encourages you to participate in the electronic recycling program.
Warranty Conditions
- For any defect, in the judgment of our technician, caused under normal use, we are responsible for repairing free of charge 12 months commencing from the date of purchase at the discretion of our company;
- A valid warranty card and original purchase invoice must be presented upon request of warranty service;
- This warranty card shall not apply to the product if
- It is consumable part(s), such as Filter, or;
- it has explicitly modified or repaired in any way by persons other than technicians of this company, or;
- it has been damaged through misuse, malicious acts, negligence, the inflow of any liquid, or;
- losses or damages are caused by force majeure or natural disasters.
- No alteration to this warranty card will be allowed;
- The warranty terms and conditions are subject to change without prior notice;
- Please retain your proof of purchase for warranty service;
- Please consult the dealer about the product compatibility with your cell phone/ PDA before purchase. Product specifications are subject to change without prior notice;
- Please visit www.momax.net for the latest product information.