Airdeer A1 Automatic Trash Can Instruction Manual

Automatic Trash Can
Model A1
Instruction manual

Cautions

1. Please read this manual carefully before using the product.
2. This product is limited for indoor use.
3. This product is made of plastic. Do not throw inflammable, explosive or burning items into the trash can.
4. If you do not use this product for a long time, please turn off the power and store it in a cool and dry place.
5. Please use a power adapter with a voltage of 5V and a rated current greater than 1A to charge this product.
6. Avoid touching the infrared sensor port and keep the infrared sensor port clean.
7. When this product is faulty, please contact customer service, do not disassemble by yourself.
8. Please refer to the instructions for correct use. Children should be accompanied by adults to use, avoid using this product as a toy.
9. The illustrations of products and accessories in the manual are schematic diagrams, for reference only. Please refer to the actual product.

Product Description

The Airdeer® automatic trash can A1 has automatic packing and bag loading function. One time to install a refill bags, can be used about 20 times. There are other functions such as induction flip lid, flip lid blocking back and voice  prompts.

Packing List

User’s Guidance

1. First time use
   1.1 After you get the automatic trash can, please open the flip lid of the trash can, take out the refill bags shipped with the product from the can and store it.
   1.2 Learn about flexible packaging refill ring (refill bags)：
   Airdeer® automatic trash cans use patented flexible-packaging refill ring, which is a continuous long tubular plastic film of about 10 meters packed in a ring-shaped plastic film cavity. Using the patented easy-to-open stitching method,  the plastic film of the garbage bags can be separated from the outer packaging film by simply pulling out the stitching thread, and can be continuously drawn out by the automatic bag loading mechanism.
   1.3 Install the refill ring：
   Make sure that the power switch is in the OFF position, and then operate as shown in the following diagram.
   1.4 Turn the power switch on the back of the trash can from the left side to the right side, that is, from the OFF position to the ON position. The trash can will load a bag automatically, and then the voice prompt “Bag loading is complete”.
   1.5 If the voice prompts: “Failed bag loading, please check if the garbage bag is used up or broken.”
   please lift the flip lid manually and check whether the garbage bag is broken.
   1.5.1 If the garbage bag has a rupture, but the rupture is relatively small, this section of the garbage bag can still be used. You can manually press the garbage bag to the bottom of the can and continue to use it.
   1.5.2 If the garbage bag rupture is relatively large, this section of the garbage bag cannot be used.
   Please manually press the garbage bag to the bottom of the can, and then carry out the operation of packing and loading the bag again. For details, please refer to Section 4 of the manual “Automatic Packing and Loading the Bag”.
   1.5.3 If the garbage bag is not broken after inspection, it is usually because the newly installed refill ring is too tight, resulting in unsuccessful bag loading. Please manually press the garbage bag to the bottom of the can and continue  to use it. After using several times, the inside of the refill ring becomes loose, then the bags can be loaded automatically.
   1.6 If the voice prompts “Low battery, please charge”, please use the attached charging cable to connect a power adapter with a voltage of 5V and a rated current of 1A or more to charge. When the battery is low, bag will not be automatically loaded. Please fully charged, then turn on the power switch to complete automatic bag loading.

2. Infrared sensor flip lid
   2.1 In order to achieve a full-coverage flip lid design, this product uses a patented side infrared sensing technology. When close to the infrared induction port within about 10cm-20cm above, the flip lid will automatically open, and  the flip lid will automatically close after a delay of a few seconds after leaving.
   Due to the weak reflection ability, the sensing sensitivity of black or dark- colored objects will be reduced.
   2.2 If the infrared sensing signal exists continuously for more than 5 seconds, the flip lid will enter the normally open mode and will close only after pressing the touch key.
   2.3 Commonly used methods to open the flip lid: one is to take the garbage into the sensing area, the other is to bend the knee slightly and enter the sensing area.
   2.4 Avoid touching the infrared sensor port and keep the infrared sensor port clean. When the infrared sensor port is dirty, the sensitivity will be reduced, and the flip lid may move by mistake.
   

3. Flip lid normally open mode
   3.1 When the flip lid is in normally open mode, the flip lid will not close automatically, you need to click the touch key once to close the flip lid.
   3.2 When the flip is closed, tap the touch key once, the lid will open and enter the normally open mode; tap the touch key again, the lid will close.
   3.3 If the infrared sensor signal exists continuously for more than 5 seconds, the flip lid will also enter the normally open mode.
   3.4 If the flip lid has been opened by infrared sensor, tap the touch key once, the flip lid will enter the normally open mode.
   3.5 When the flip lid is opened by infrared induction, during the automatic closing process, when the angle of the flip lid is still greater than 45 degrees, you can push or block the flip lid with your hand, and the flip lid will  automatically go back to the open state and enter the normally open mode.
   3.6 If the flip lid is in normally open mode, tap the touch key once, or close the flip lid directly by hand, it will exit the normally open mode.

4. Automatic packing and bag loading
   4.1 To save the use of garbage bags, you can open the flip lid before packing to check whether the garbage in the can is higher than the light bar. If so, you can press the garbage first to make it lower than the light bar.
   4.2 Long press the touch key, the trash can will make a “di-di-di-” sound, until you hear the voice prompt “Start packing”, then the trash can starts to pack automatically.
   4.3 If the voice prompts ” It’s overfull, please press the touch key within 5 seconds to keep packing or compress manually and then repack. “, after that the trash can will sound “di–” every 1 second. Press the touch key within 5 seconds, the trash can will automatically lift the big lid for overfull packing; if the key has not been pressed at the end of the “di–” prompt, the trash can will exit the packing program, then please open the flip lid to check. If you can  compress the garbage by hand, please press the garbage below the light bar, and make sure it will not rebound, then long press the touch key again to pack.
   4.4 In actual use, if you know that the garbage is overfilled and the height exceeds the LED light bar, you can directly lift the big lid by hand without using the automatic detection function of the trash can, and then long press the  touch key for overfull packaging.
   4.5 When the voice prompts ” Packing complete, please take it out”, take out the packed garbage bag。
   4.6 After that, the big lid will automatically close, and the bag loading will start automatically until the voice prompts “Bag loading complete”。
   4.7 If the voice prompt “Failed bag loading, please check if the garbage bag is used up or broken”, then follow the operation in section 1.5 of this manual.

5. Charging
   When the trash can voice prompts “Low battery, please charge”, please use the attached charging cable to connect a power adapter with a voltage of 5V and a rated current of 1A or more to charge.
   The charging status lights up red, and lights up green when full.

6. Install a new refill ring
   If the garbage bag is used up, a new refill ring needs to be installed. There are two installation methods.
   6.1 Method 1: Do not turn off the power, install a new refill ring according to the figure ①, ②, ③, ④, ⑤ in section 1.3, then long press the touch key until the fan rotation sound, and there will be a voice prompt after the bag loading  is completed. If bag loading is unsuccessful, you can follow section 1.5 to deal with.
   6.2 Method 2: Turn off the power switch first, then click the touch key to quickly discharge the circuit board. Then follow the sections 1.3, 1.4 and 1.5 of this manual.

7. Restart the trash can
   7.1 When the trash can work abnormally, you need to restart the trash can.
   7.2 To restart the trash can, first turn off the power switch, and then click the touch key to quickly discharge the circuit board; then turn on the power switch, there will be a sound of the fan rotating, and then a voice prompt “Welcome to Airdeer automatic trash can”, then the trash can restart is completed.
   7.3 If after turning on the power switch again, there is no fan rotation and no voice prompt, usually after the power switch is turned off, the circuit board has not been fully discharged and the power is turned on again, the trash can  has not restarted.

8. Cleaning and maintenance
   Please use a soft cloth with a small amount of water or neutral detergent to clean and wipe, avoid scratching with hard objects, avoid rinsing directly with water, and do not soak in water. For products with decorative lines, please  wipe back and forth in the direction parallel to the decorative lines.

Parameters

Name and content of hazardous substances in the product

This form is prepared according to the provisions of SJ/T11364
0: Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirement specified in GB/T26572
X: Indicates that the content of the hazardous substance in at least one homogeneous material of the part exceeds the  limit requirement specified in GB/26572

FAQ

2.Is it in normally open mode?
3.Is it in the sensing area?
4.flip lid move by mistake
5.Other issues| 1.Check the power switch
2.Tap the touch key
3.Close to enter the sensing area
4.Clean the infrared sensor port
5.Please contact customer service
Touch keys do not  respond| 1,Is the power switch turned on?
2,Other issues| 1,Check the power switch
2,Please contact customer service
Automatic packing  issues| 1.Voice prompt” It’s overfull”
2.The automatic packing function fails,  resulting in the garbage bag being unable to be sealed or cut off
3.Other issues| 1.According to the voice prompt of the trash can, check whether the garbage is overfull
2.Please contact customer service
3.Please contact customer service
No automatic bag loading| 1. Whether the garbage bag is used up
2. Whether the garbage bag is broken
3. Whether the stitching thread of the refill ring is all pulled out
4. Other issues| 1. When the garbage bag is used up, please install a new refill ring
2. If the garbage bag is broken, pull out a piece of garbage bag manually and pack it again
3. Pull the stitching thread all out
4. Please contact customer service

After-sales service guarantee

Dear user, thank you for purchasing and using Airdeer® automatic trash can. This product starts from the date of purchase (from the day after the user signs it), if there is any quality problem, you can enjoy a one-year warranty service  with a valid invoice. The service commitment is as follows:

Note: The guarantee service refers to the failure caused by the quality problem of the product itself.
The merchant will repair, replace and return the product. During the guarantee period, the failure caused by the customer’s unauthorized disassembly and assembly of the product can only be repaired at a fee; The returned products must  be guaranteed to be in good condition and will not affect secondary sales.

Non-Warranty Regulations

1. The product has exceeded the validity period of the guarantees or has no purchase notes, vouchers, and valid purchase time records;
2. Product failure or damage caused by human factors;
3. Damage caused by irresistible factors;
4. Damage caused by self-disassembly, modification and repair without permission.

Repair information (required)

Customer name: Product Model:
Order Number: Purchase date:
Contact Details:
Shipping Address:
Fault description: _____

Hangzhou Cheele Electronics Co.,Ltd.
Add：Bd.2 Rm. 403, Jugong Road 1#, Binjiang District, Hangzhou, China
Email：support@airdeertech.com
http://www.airdeertech.com
Tel：+86-571-86691142

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>