Enerlites 61580-TR Duplex Tamper Resistant Receptacle Diagram Installation Guide
- June 14, 2024
- ENERLITES
Table of Contents
61580-TR Duplex Tamper
Resistant Receptacle Diagram
Installation Guide
Duplex Tamper Resistant Receptacle Diagram
NOTICE : For installation by a qualified person in accordance with
national and local electrical codes.kjhuyhslkgjlxfjh
WARNING : Risk of Electric Shock or Death. Disconnect power before
installing.
USE COPPER WIRES ONLY; 14AWG to 12AWG.
Installation Instructions
- Strip wires: Remove 5/8 inch of the outer insulation from wires.
- Use strip gauge on the back of the device
- Side Wire: bend the stripped part of the wire into a hook and hook it on to the terminal screw.
- Firmly tighten the terminal screw. Do not overtighten.
- 2nd installation method: Use solid #14 AWG for 15A branch circuit ONLY.
Remove 5/8 inch of the outer insulation from wires, then insert the stripped wire into the terminal holes on the back.
© 2016 Enerlites, Inc.
CA, U.S.A.
WWW.ENERLITES.COM
0201180111-01
Documents / Resources
|
Enerlites 61580-TR Duplex Tamper Resistant Receptacle
Diagram
[pdf] Installation Guide
61580-TR Duplex Tamper Resistant Receptacle Diagram, 61580-TR, Duplex Tamper
Resistant Receptacle Diagram, Tamper Resistant Receptacle Diagram, Resistant
Receptacle Diagram, Receptacle Diagram
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>