Enerlites 91000-GL 15A Decorator Full Light Installation Guide
- June 14, 2024
- ENERLITES
Table of Contents
Enerlites 91000-GL 15A Decorator Full Light
Product Information
Specifications
- Model Number: 91000-GL
- Amperage: 15A
- Type: Decorator Full Guide Light
Description
The 91100-GL is a decorator switch with a built-in LED guide light. It
features a daylight sensor that automatically controls the guiding light,
turning it on when a room becomes dark. This product is ideal for use in
hallways, kitchens, nurseries, and more.
Features
- Built-in LED guide light
- Daylight sensor for automatic control
- Suitable for various locations such as hallways, kitchens, and nurseries
Installation Instructions
Warning
Before installing the switch, turn the POWER OFF at the circuit breaker. Read
and understand these instructions before installation. This device is intended
for installation in accordance with the National Electric Code and local
regulations.
It is recommended to have a qualified electrician perform the installation.
Ensure that the circuit breaker or fuse(s) are turned off and power is off
before wiring the device. Use copper wire only.
Wiring Directions
- Turn off the power at the circuit breaker.
- Identify the HOT (Black), NEUTRAL (White), and GROUND wires in the wall box.
- Insert the wires into the terminal holes on the back side of the receptacle.
- Tighten the terminal screws to clamp the wires in place.
- Connect the ground wire to the GR terminal using the Green screw.
Switching the Lens
To switch the lens:
- Pry off the face cover at the notch on both sides.
- Replace the existing lens with either the Frosted lens or the Louvered lens.
Warranty Information
This product comes with a warranty. For warranty details and inquiries,
please visit www.enerlites.com or contact customer
support at 0204230222.
Frequently Asked Questions (FAQ)
-
Q: Can I install this switch myself?
A: It is recommended to have a qualified electrician perform the installation to ensure safety and compliance with electrical codes. -
Q: What is the purpose of the guiding light?
A: The guiding light provides illumination in dark environments, making it easier to navigate through hallways and rooms. -
Q: Can I switch between different lenses?
A: Yes, you can switch between the Frosted lens and the Louvered lens by prying off the face cover and replacing the existing lens.
SPECIFICATIONS
- Rating……………………………………………………………………………15 Amp, 125VAC
- Wire Terminals…………………………………………………………………..#14–#12 AWG
- Operating Temperature……………………………………….. -4 to 140°F (-20 to 60°C)
- Dimension ……………………………………………………………….2-3/4”×1-1/2”×1-5/16”
DESCRIPTION
The 91100-GL is a decorator with a built-in LED guide light. A daylight sensor automatically controls the guiding light and turn on when a room becomes dark. It is ideal for hallways, kitchens, nurseries and more.
FEATURES
- Full Guidelight can replace any standard receptacle
- 2700K LED Guide Light with Daylight sensor
- Clamp-type wire terminals are designed for easy installation from the back
- Lamp life rated 50,000 hours
- UL Listed
WARNING
- Turn the POWER OFF at the circuit breaker before installing the switch.
- Read and understand these instructions before installing. This device is intended for installation in accordance with the National Electric Code and local regulations. It is recommended that a qualified electrician performs this installation.
- Make sure to turn off the circuit breaker or fuse(s) and make sure power is off before wiring the device.
- Use copper wire only
WIRING DIRECTIONS
Turn off the power at the circuit breaker. Identify the HOT, NEUTRAL, and GROUND wires in the wall box. Insert wires into the terminal holes on the back side of the receptacle, then tighten the terminal screws to clamp wires in place.
- Insert the BLACK (LINE) wire into HOT terminal
- Insert both the WHITE wires into the NEUTRAL terminal (With silver screw)
- Clamp the two GREEN/BARE (COPPER) wires together, then insert one ground wire into the GR terminal (Green screw)
WARRANTY INFORMATION
This device is warranted to be free of material and workmanship defects for 2 years from the date of purchase. An original receipt or proof of purchase from an authorized retailer must be presented upon warranty claim. ALL claims must be verified and approved by Enerlites, Inc. Warranties from other Enerlites products may vary. This warranty is non-transferable and does not cover normal wear and tear or any malfunction, failure, or defect resulting from misuse, abuse, neglect, alteration, modification, or improper installation. To the fullest extent permitted by the applicable state law, Enerlites shall not be liable to the purchaser or end-user customer of Enerlites products for direct, indirect, incidental, or consequential damages even if Enerlites has been advised of the possibility of such damages. Enerlites’ total liability under this or any other warranty, express or implied, is limited to repair, replacement, or refund. Repair, replacement or refund are the sole and exclusive remedies for breach of warranty or any other legal theory.
© 2023 Enerlites Inc. CA, U.S.A.
WWW.ENERLITES.COM 0204230222
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>