Kraus KPF-1690 Allyn Modern Industrial Pull Down Single Handle Kitchen Faucet Instruction Manual

Kraus KPF-1690 Allyn Modern Industrial Pull Down Single Handle Kitchen

Faucet

Specifications:

• Product: Britt Single Handle Commercial Kitchen Faucet
• Model: KPF-1690
• Dimensions: 4 5/8″ (116.6mm) x 10 3/4″ (271.6mm) x 20 5/8″ (524mm)
• Maximum Height: 6 3/8″ (162mm)
• Maximum Reach: 3″ (76mm)
• Installation Type: Single Hole
• Deck Plate: Optional

Product Usage Instructions

Prior to Installation
For technical assistance or replacement parts, please contact Kraus Customer Service and one of our representatives will be happy to help:

• Toll-Free: 800-775-0703
• Email: customerservice@kraususa.com

Tools Required:

• Adjustable Wrench
• Bucket
• Phillips Screwdriver
• Safety Goggles

Care & Maintenance

To keep the product clean & shining, follow the steps below:

1. Rinse with clean water & dry with a soft cloth
2. Do not clean with soaps, acid, polish, abrasives or harsh cleaners
3. Do not use cloth with a coarse surface
4. Unscrew the aerator and clean when necessary

Installation Steps

Step 1. Remove mounting hardware

1. Shut off the water supply.
2. Remove the old faucet.
3. Clean the mounting surface.
4.  Remove the mounting hardware (C) from the faucet body (B).

Step 2. Install the faucet assembly (without deckplate)

1. Before installation, ensure that the flange (D) is placed on the bottom of the new faucet assembly (B).
2. Insert the faucet body through the hole in the sink or countertop.
3. NOTE: Skip this step and move on to Step 3 if installing with deckplate.

Step 3. Install the escutcheon

1. Before installation, remove the flange (D).
2. Screw the bolts (G1) into the escutcheon (E) and ensure that the base plate (F) is pressed onto the escutcheon (E) before the escutcheon (E) is installed over the three holes on the sink.
3. From underneath the sink or countertop, hand tighten the mounting nuts (G2). Do not overtighten.
4. NOTE: Skip this step if installing without deckplate.

Step 4. Install the faucet assembly (with deckplate)

1. Insert the faucet assembly (B) through the hole in the escutcheon (E).
2. NOTE: Skip this step if installing without deckplate.

Step 5. Secure the faucet assembly

1. Install the plastic washer and metal washer (C1) onto the threaded mounting shank.
2.  Thread the nut (C2) onto the mounting shank.
3. Lock the nut (C2) into position by tightening the screws (C3). Do not overtighten.

FAQ

1. Q: What should I do if I have questions, technical issues, or problems with the product?
   A: Please contact our Customer Service Team at 1-800-775-0703 or email customerservice@kraususa.com. Have the model number available and retain a copy of your receipt with purchase date for reference.

2. Q: How do I clean and maintain the product?
   A: Rinse with clean water and dry with a soft cloth. Do not clean with soaps, acid, polish, abrasives, or harsh cleaners. Do not use cloth with a coarse surface. Unscrew the aerator and clean when necessary.

3. Q: Should I shut off the main water supply before installing the new faucet?
   A: Yes, it is recommended to shut off the main water supply before installing the new faucet.

Congratulations on the purchase of your new Kraus plumbing fixture!

• Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product:

DO NOT RETURN TO STORE

• Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com
• Have the model number available and retain a copy of your receipt with purchase date for reference.
• If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit.

Prior to Installation:

• Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement.
• Read all instructions and safety warnings and ensure you have all tools, parts, and equipment necessary for a safe installation.
• Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet.
• Pre-drilled hole size requiremen t: 1 3/8″ (min)
• Max countertop thickness : 3”

For technical assistance or replacement parts, please contact Kraus Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or Customerservice@kraususa.com

Tools Required

Care & Maintenance

To keep the product clean & shining, follow the steps below:

1. Rinse with clean water & dry with a soft cloth
2. Do not clean with soaps, acid, polish, abrasives or harsh cleaners
3. Do not use cloth with a coarse surface
4. Unscrew the aerator and clean when necessary
   This installation manual is subject to change without further notice.

Diagram and Parts List

• A. Spray Head
• B. Faucet Body
• C. Mounting Hardware
  • C1. Rubber & Metal Washer C2. Mounting Nut
  • C3. Mounting Screw
• D. Flange & Washer
• E. Escutcheon
• F. Base Plate
• G. Escutcheon Mounting Hardware G1. Bolt
  • G2. Plastic Nut
• H. 2.5 mm Hex Wrench

Faucet Dimensions

• Installer Tip:
  Shut off main water supply before installing new faucet.

Step 1. Remove mounting hardware

• Shut off the water supply. Remove the old faucet. Clean the mounting surface. Remove the mounting hardware (C) from the faucet body (B).

Step 2. Install the faucet assembly (without deckplate)

• Before installation, ensure that the flange (D) is placed on the bottom of the new faucet assembly (B). Insert the faucet body through the hole in the sink or countertop.
  NOTE: Skip this step and move on to Step 3 if installing with deckplate.

Step 3. Install the escutcheon

• Before installation, remove the flange (D). Screw the bolts (G1) into the escutcheon (E) and ensure that the base plate (F)
  is pressed onto the escutcheon (E) before the escutcheon (E) is installed over the three holes on the sink. From underneath the sink or countertop, hand tighten the mounting nuts (G2). Do not overtighten.
  NOTE: Skip this step if installing without deckplate.

Step 4. Install the faucet assembly (with deckplate)

• Insert the faucet assembly (B) through the hole in the escutcheon (E).
  NOTE: Skip this step if installing without deckplate.

Step 5. Secure the faucet assembly

• Install the plastic washer and metal washer (C1) onto the threaded mounting shank. Thread the nut (C2) onto the mounting shank. Lock the nut (C2) into position by tightening the screws (C3). Do not overtighten.

Step 6. Connect the waterlines

• Thread the nut (1) on the supply line onto the outlet of the water supply valve (2) and tighten with wrench. Do not overtighten.
• NOTE : Please make sure filter washers are installed before connecting to the main valve.

Step 7. Flush and check for leaks

• Pull the hose assembly out of the spout and remove the spray head by unscrewing it from the hose in a counterclockwise direction. Hold the end of the hose down into the sink and turn the faucet on to the warm position. Flush water lines for one minute to flush away any debris. Check for leaks. Retighten any connections if needed. Do not overtighten.
• Reinstall the spray head by hand tightening it back onto the spray hose. After installation is completed, turn on the hot and cold water supplies to check for leaks.

Replacement Parts

• *Denotes spray hose assembly color options: –
  • Spray hose assembly color options:
  • Black hose with Matte Black connector (BLMB);
  • Black hose with Spot-Free Antique Champagne Bronze connector (BLSFACB);
  • Spot-Free Stainless Steel hose with Spot-Free Stainless Steel connector (SFS);
  • Black hose with Spot-Free Black Stainless connector (BLSFSB);
  • Black hose with Brushed Gold connector (BLBG);
  • Black hose with Antique Brass connector (BLAB)
• **Denotes faucet component color options:
  • SFS – Spot Free Stainless Steel
  • MB – Matte Black
  • BG – Brushed Gold
  • SFACB – Spot Free Antique Champagne Bronze
  • SFSB – Spot Free Black Stainless
  • AB – Antique Brass
  • BL – Black
  • GR – Gray

Troubleshooting

• If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:

Codes/Standards Applicable

Lifetime Limited Warranty

• Kraus USA Plumbing, LLC (“Kraus”) extends this warranty to the original purchaser for personal household use of the Faucet when purchased from an authorized Kraus dealer and in the location of original installation. This warranty is non-transferable.
• Kraus warrants the structure and finish of the Faucet to be free from defects in material and workmanship under normal usage for as long as the original purchaser resides in the residence in which the Faucet was first installed.
• Kraus warrants the Faucet’s spearhead assembly (including the engine, aerators, structure, restrictors, back flow preventers, sprayer hoses, braided supply line hoses which encompasses nylon, silicon and stainless steel) of the product to be free from defects in material and workmanship under normal usage for a period of one (1) year from the date of purchase.
• Kraus warrants the Faucet’s cartridge to be free from defects in material and workmanship under normal usage for a period of five (5) years from the date of purchase.
• Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus.
• Commercial Warranty
  • Kraus USA Plumbing, LLC (“Kraus”) warrants its Products for a period of one (1) year to commercial purchasers of Products used in industrial, commercial and business applications.
• Care and Cleaning Instructions
  • Certain cleaning products may cause damage to a Product’s finish and use of the following on the Product will void this warranty:
• Abrasive cleaners such as powders, bleach, ammonia, alcohol or chorine
• Abrasive pads, steel wool or wire brushes

What is Not Covered

• This warranty does not cover Products that were discontinued when purchased or display Products, whether such Products were purchased at discount outlets, unauthorized dealers, and/or sold on clearance. This warranty does not cover any free gifts included with purchase.
• This warranty does not cover damage resulting from neglect, misuse (including use for an unintended application), abuse, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, improper maintenance, alteration of the Product, or failure to follow care, cleaning or installation instructions enclosed with your Product. Kraus recommends that all Kraus Products be installed by a fully licensed and insured trade professional with experience in the installation of bathroom and/or kitchen manufactured goods.

How to Make a Warranty Claim

• If you are a consumer purchaser, please contact a Kraus Customer Service Representative at:

  • Kraus USA Plumbing, LLC
  • 12 Harbor Park Drive
  • Port Washington, NY 11050
  • Toll-free 800-775-0703
  • Customerservice@kraususa.com

• If you are a plumbing contractor or trade professional, please contact a Kraus Pro Representative at:

  • Kraus USA Plumbing, LLC
  • 12 Harbor Park Drive
  • Port Washington, NY 11050
  • 516-801-8955
  • Proservice@kraususa.com

• If you are an authorized partner, please contact a Partner Support Representative at:

  • Kraus USA Plumbing, LLC
  • 12 Harbor Park Drive
  • Port Washington, NY 11050
  • 516-801-8954
  • Partnersupport@kraususa.com

• In requesting warranty service, please be ready to provide your proof of purchase and a description of the problem. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.

• Limitation on Duration of Implied Warranties
  Please note that some states/provinces (including Quebec) do not allow limitations on how long an implied warranty lasts, so the below limitations may not apply to you. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ANY IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO
  THE STATUTORY PERIOD OR THE DURATION OF THIS WARRANTY, WHICHEVER IS SHORTER.

• Limitation of Special, Incidental or Consequential Damages
  Please note that some states/provinces (including Quebec) do not allow the exclusion or limitation of special, incidental or consequential damages, so the below limitations and exclusions may not apply to you. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER, AND KRAUS USA PLUMBING, LLC SHALL NOT BE LIABLE FOR, ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LABOR CHARGES TO REPAIR, REPLACE, INSTALL OR REMOVE THIS PRODUCT), WHETHER ARISING OUT OF BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, BREACH OF CONTRACT, TORT, OR OTHERWISE.
  This warranty gives you specific legal rights, and you may also have other rights which vary from state/province to state/province.

• Download the Kraus Care & Maintenance Guide at: http://www.kraususa.com/maintenance
  IMPORTANT

  • Register Your Kraus Product
  • Activate Your Warranty
  • Access Premium Customer Support Get Product Information

• REGISTER TODAY

  • http://www.kraususa.com/registration

References

• Kraus | Kitchen and Bathroom | Sinks, Faucets, and Accessories
• Care & Maintenance | Well-crafted products | Light maintenance.
• Kraus USA Self Help

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>