Vitade 4K Stream Webcm AI Powered Framing User Manual

Vitade 4K Stream Webcm AI Powered Framing

Catalog

Thanks for purchasing our webcam!
Using this guide to set up and begin using your new webcam. This user guide will provide you with most of the information of the we beam you need to get. Alternatively, solutions to common problems can be found in the FAQ. If you have any problems to setting up webcam, please contact with your webcam supplier.

Application Guide

Note

1. (Dlf the USB cable of is not long enough, please use the TYPE A USB2.0 HUB extension cable. The total length of HUB extension cable plus camera USB cable should be within 5 meters.
2. Please do not point the lens to the background with a large single color, the light should not be too dark or too bright, or have other reflective objects such as mirrors. Otherwise it will affect the use effective.
3. If you are using a desktop computer, please do not connect the camera to the USB port on the front of the computer. In this case, the camera can not work properly due to insufficient power supply.

For ZOOM Users

Video
After entering ZOOM conference, turn on the camera and select USB Live Camera, after the light is on, it means the camera is on and working.

Audio
After entering ZOOM conference, click Join Audio, enter Audio Settings, you can choose system microphone or USB device microphone.

Notice: Computer can’t detect webcam

Mac book can’t detect webcam
In rare cases, Mac OS 10.6 or above does not detect the USB Live Camera or the detected camera name is inconsistent, please restart your computer and re- plugging the camera.or connect the camera to another USB interface. If the camera is still not detected, Maybe the MAC system does not load the driver of the USB Live Camera. please follow the steps below to reset the PRAM

1. Turn off the computer.
2. Find the following buttons on the keyboard: Command, Option, P, and R. You will need to press these buttons simultaneously in step 4.
3. Re-start your computer.
4. Press the Command-Option-P-R three keys at same time before the screen turn into the gray screen.
5. Press and hold the above buttons until the computer restarts and you will hear the startup sound again.
6. Release these keys.

If your computer still can’t detect the camera via above method, please upgrade the Mac OS system.

Windows system computer can not detect the camera
If the Windows system does not detect the camera device or camera device name is inconsistent with the camera name in Device Manager, please try the following

• Step1. Remove the webcam> Reconnect the webcam to computer(or use another USB plug), then webcam is detected or restart the computer;( If you are using a desktop computer, please do not connect the camera to the USB port on the front of the computer.)
• Step2. If your computer has installed with the other camera before, and step 1 above is invalid, please do as follow
  • For Windows XP SP2 and Windows 7/8/10 systems: Right-click on the “My Computer” > “Manage” > “Device Manager” > open “Sound, Video and Game Controllers, “Audio Inputs and Outputs” and “Cameras” ,uninstall “USB Live camera” and “USB Live camera audio” in the above three options. Then remove the camera and reconnect it to the computer, the computer reloads the camera and installs the driver automatically.After that “USB Live Camera” will appear in “Device Manager”. Then you can initiate a video call now.

Setting for Mac OS X Users

1. installation

   • The Webcam will be automatically installed when you connect it to a Mac; no additional software is required. To check whether the webcam is detected or not, you may click the “Apple” menu(in the top left corner of your screen)and then click “About this Mac”. Click on “System Report” from the pop-up window that appears. The System Information window for your Mac will appear. Navigate to the “USB” Section and check to see whether the webcam is listed as a connected device(Show as “USB Live Camera” like the photo below).

   • Audio Setting
     Failure to set up the audio device properly(including the microphone and speaker) this will cause the camera can not record audio,even the computer can not play the

   • sound;

   • In Mac OS X, open “System Preferences” > select “ Sound” >”Input” > “Select Sound Input Device” >select “USB Live Camera audio” as the default so und input device (microphone). Move the volume slider to the desired input volume;

   • In Mac OS X, open “System Preferences” > ” llsound” > “Output”> “Output Volume” > uncheck “Mute” in this menu and adjust the
     Input volume to a medium level. If you’re using an external speaker, make sure the audio “Output” option is the audio output device you’re using to avoid cannot play the sound. Refer to the picture as below

   • For video recording, please choose Photo Booth; For video calling please choose Face Time or Skype and other video software etc. For playing video, please use Quick Time.The Quick Time and Photo Booth are preinstalled on all Macs as a standard.

2. Photo Booth
   If your Mac has a built-in camera already, you may open Photo Booth, click the “Camera”on the top left of your screen.and choose the “USB Live Camera”to use this webcam(like in the photo below).

   • Start recording your videos or capture photos.

3. FaceTime
   As long as you are using a Mac that is compatible with Apple’s Face Time (Mac OS V10.6 or above), just follow the Mac installation instructions. Your system should detect the webcam automatically in

4. Face Time.
   Open Face Time, click ‘Video”on the top left of your screen and choose “USB Live Camera”as the default camera device for the system (like in the picture below).

   • If you need better sound quality, please select “USB Live Camera audio” as the default microphone device for the system, otherwise will use the built-in microphone of your computer.

5. Skype use for Mac OS X

   • Before running the Skype, make sure that any other applications that are using the webcam are closed. Otherwise Skype will not recognize the webcam. It is highly recommend to update your

   • Skype to latest version in skype.com official website. Once you have installed Skype and started it up, select “Audio &Video Settings … “from the Skype menu(in the top left corner of your screen)
     

   • In the” Audio Ni deo” tab of Skype, Select “USB Live Camera audio “in the Microphone dropdown menu to get excellent audio quality. We recommend to set the volume to medium level, refer to the figure below. Select “USB Live Camera “in the Camera dropdown menu. Click “Test, then you will hear the test sound and see the microphone status bar is flashing. It is means that the audio setting is correct.

Remember to save your changes before closing the window.

Note

• Failure to set up the audio device properly(including the microphone and speaker) this will cause the camera can not record audio,even the computer can not play the sound.
• When the “Automatically Adjust Microphone” option is turned on, it may cause the sound to be interrupted during a voice call, or sometimes the sound is not clear. It is recommended that you turn off the “Automatically Adjust Microphone” option. Set the “Volume” adjustment bar to medium or higher lever. You can adjust it later to meet your volume preferences.

Setting for Windows Users
The USB Live Camera is compatible with most Windows operation system included Windows XP(SP2)/7/8/10.

1. Installation

   • The webcam will automatically be installed when you connect it to your computer.
   • Click : “Control Panel” > “Device Manager” > “Sound, video and game controllers” and “Audio inputs and outputs”,it will appear”USB Live Camera Audio”;
   • Click “Image Device” [It is called”Cameras”in Windows10] it will appear “USB Live Camera”.lt is indicating that the camera has been installed successfully.

2. Audio Setting

   • Setting audio input device(Microphone)
   • For Windows system,right click “Speaker” at the buttom right corner of the computer “Recording devices” > “Recording” tab > select “USB Live camera audio” > click “Set as Default Device” in the “Default Device” or “Default Communication Device”, then click “USB Live camera audio” > “Properties” > “Levels” to set the setting ”  “. Adjust the sound volume of “USB Live Camera Audio” to medium volume or high volume; Click the “Listen” tab, uncheck “Listen to this device”; click on the “Advanced” tab, it is recommended to select “AM Radio Quality”, “CD
   • Quality” or “DVD Quality”. On the “Exclusive Mode” tab, please mark” .J “in “Allow the applications to take exclusive control of this device” and “Give exclusive mode applications priority”.
   • @Audio output setting (Speaker) device
   • For Windows XP SP2/7/8/10: Right click on the bottom right corner of the computer (right of the taskbar) “Speaker” > “Playback devices” > “Playback”, Select the built-in speaker of “Realtek
   • High Definition Audio” > select “Default device” or “Default Communication device” in “Set Default”, and then click to select “Realtek High Definition Audio” configuration > “Properties” > “Levels” sets  “to” “, adjusts the speaker’s sound to medium or high volume; check the “Enhancements” option, “Disable all sound effects”, then in the “Advanced” option.please don’t select a frequency similar to the microphone. It is preferred for 24-bit,48000 Hz or higher sound quality.

3. Video setting

   • There is no video recording tools in Windows XP SP2/7 system,please install video application tools such as AMCAP firstly. Select “Devices” in the AMCAP software ,select “USB Live Camera audio” for the default sound recording (audio input) device, select “USB Live Camera” as the default video device.
   • For Windows 8/10,search “Cameras” program in the search box of the “Start” menu to set the “USB Live Camera audio” as default video device.
   • You may also need to set up the default device for the individual applications you use
   • Select “USB Live Camera”and “USB Live camera audio” as the default device in the video application setting options;
   • We recommend to set the volume to medium level in “Volume”button of your computer. Use the video application ”Volume Up”or “Volume Down”to adjust the volume.

4. Skype setting for Windows user

5. Open your Skype application,

6. Select the” Tools “menu and go to “Options “ln the “General “tab, make sure that your settings are as follows

7. Audio Settings: Select “USB Live Camera audio” for as default Microphone.

   • As for Speaker and Ringing setting. please select the default sound card of Windows. Click “Test”, then you will hear the test sound and see the microphone status bar is flashing.It is means that the audio setting is correct.

   • Note
     When the “Automatically Adjust Microphone” option is turned on, it may cause the sound to be interrupted during a voice call, or sometimes the sound is not clear. It is recommended that you turn off the “Automatically Adjust Microphone” option. Set the “Volume” adjustment bar to medium or higher lever. You can adjust it later to meet your volume preferences.

   • Video Settings : Select “USB Live Camera”from the dropdown menu. Remember to save your changes before closing the window.

Notes

1. In order to avoid the camera being occupied and unable to make a video call, please make sure you have closed other video application before you create a new video calling.
2. If the Skype version that preinstalled in Windows 10 or the Skype downloaded from the Windows APP Store does not capture the webcam image or the video is blurred and lags. Please uninstall the Skype and go to the Skype official website skype.com to download the desktop version instead.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>