Enerlites Commercial Grade 15A Quick Touch Deco Switch Instruction Manual
- June 14, 2024
- ENERLITES
Table of Contents
Commercial Grade 15A Quick Touch Deco Switch
3-Way Switch Diagram
Single Pole Switch Diagram
Switch instructions
NOTICE: For installation by a qualified person in accordance with
national and local electrical codes.
WARNING: Risk of Electric Shock or Death. Disconnect power before
installing.
CAUTION: USE COPPER CONDUCTORS ONLY; 15A, 12AWG to 14AWG.
- Remove insulation from conductors 5/8 inch.
- Side Wire: Wrap conductor securely around terminal screw.
- Tighten terminal screws securely, 9-12 pound ·inch(1.0-1.4N·m) of torque.
- Push-in terminals for use on 15 ampere branch circuits only and with
- No. 14 AWG solid copper conductors only.
- Do not use push-in terminals on a 20 ampere branch circuit.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>