VIOFO T130 3 Channel 2K Dash Cam User Manual

: June 5, 2024
: VIOFO

VIOFO T130 3 Channel 2K Dash Cam

VIOFO-T130-3-Channel-2K-Dash-Cam-Product

Product Overview

Standard Items

VIOFO-T130-3-Channel-2K-Dash-Cam-fig-1

Optional Accessories

VIOFO-T130-3-Channel-2K-Dash-Cam-fig-2

Product Diagram

Front Camera (Main Unit)

VIOFO-T130-3-Channel-2K-Dash-Cam-fig-4

GPS Module
Reset Hole
microSD Card Slot
Front Rotatable Lens
Interior Rotatable Lens
Power On | OFF Recording Start | Stop
Microphone On | OFF
Wi-Fi On | OFF
Video Protect
Rear Camera Port
Power In / microSD Card Reader Mode (computer)
Recording Status Indicator
Microphone Status Indicator
Wi-Fi Status Indicator
GPS Status Indicator
Heat-dissipation Block (Don’t touch this block)

Rear Camera (Optional)

VIOFO-T130-3-Channel-2K-Dash-Cam-fig-5

Bracket
Power in
Lens

LED Indicators

LED light	LED Status	Behavior

REC

| Solid Red| Recording

Flashing Red

| Not Recording Updating Firmware

MIC

Wi-Fi

| Solid Blue| Wi-Fi Connected
Flashing Blue| Wi-Fi on and Waiting Connecting
Blue Off| Wi-Fi Disabled

Buttons and Icons

VIOFO-T130-3-Channel-2K-Dash-Cam-fig-6

Installation

Inserting / Removing the Memory Card

Insert the Memory Card

Make sure the metal contacts on the memory card are facing away from the VIOFO logo side of the main unit. Ensure the camera is turned off and push the memory card into the card slot until you hear a click.

Remove the Memory Card

Ensure that the camera is turned off, and then push the edge of the memory card with your fingernail. The card will spring out far enough to be removed.

Note:

The microSD card is sold separately. The microSD card must have a UHS-U1/U3 or above rating and the capacity up to 256GB.
We recommend you buy the VIOFO brand memory cards which are manufactured with top-tier MLC NAND flash, making them durable and reliable.
Please format the card on a computer to the exFAT or FAT32 file system.
Formatting will permanently erase any data on the microSD card. For best performance, format periodically (after backing up any important files).
Make sure the metal contacts on the memory card are facing away from the VIOFO logo side of the main unit. Ensure the camera is turned off and push the memory card into the card slot until you hear a click.

Caution

Please turn off the T130 before inserting or removing the microSD card.
Inserting or removing the microSD card while recording may destroy the files.

Formatting the Memory Card

Formatting the Memory Card in the Camera

To format the card in the camera, either use the VIOFO App and the format option in the Settings or alternatively long-press the [ ] button

Formatting the Memory Card using a computer

To format the memory card on your computer, follow your computer’s user manual. For deep formatting of the memory card, you can also download the GUIFormat tool from our official website: https://support.viofo.com/support/solutions/folders/19000019360

Install Front Camera

Install the Mount

Insert the clips, then slide the mount horizontally into the slot on the back of camera
Select a location on the windshield behind the rear-view mirror where the camera will not obstruct the driver’s view while driving.
Wipe clean the installation surface of the windscreen with a dry cloth, it must be grease free for the sticky pad to stick firmly.
Peel the protection film off the sticky pad and camera lens.
Fix the front camera on the selected location
Adjust the lens angle Adjust the angle of the lens up / down if required. The Interior Rotatable Lens can also be rotated left and right.
Connecting to Power. Plug the USB power adapter into your vehicle’s 12V / 24V female power socket. Insert the car charger USB cable’s male port into the camera mount’s USB Type-C port.

VIOFO-T130-3-Channel-2K-Dash-Cam-fig-11

Layout after front camera installation and power connection:

Install Rear Camera (Optional)

Select an installation location.
Wipe clean the installation surface of the windscreen with a dry cloth. Select a location on the windscreen, without defrost grid wires, and where the camera can record the entire rear view.
Peel the protection film OFF the sticky pad and camera lens
Fix the rear camera on the selected location.
Connecting with Rear Camera. Power off the product and connect the rear camera cable to the front camera (main unit). Cable routing should be as shown in the following two diagrams. Use the cable clips to help fix the two cables conveniently and safely

VIOFO-T130-3-Channel-2K-Dash-Cam-fig-14

Remove Cameras

Removing the front camera

To remove the front camera from its bracket, slide the camera to the right and pull the front camera out of the mounting bracket.
Note: When you want to plug and unplug the front camera or rear camera, please turn off the camera first.
Removing the rear camera
Unplug the rear camera cable from the rear camera port and remove the entire mount from the glass.
Tips

Do not install/mount the camera in a location that interferes with the driver’s visibility and safety.
Install/mount the camera close to the rearview mirror so that both sides of the scene being recorded are equally covered by the camera’s FOV (field of view).
To ensure a clear view on rainy days, the lens should be positioned within the windshield wiper’s sweeping range.
Do not install/mount the camera on or near airbag panels.
Installation/mounting location should not be affected by sun control film (window tint). There should not be any other electronic equipment close to the camera for optimal performance.

Note:
Do not install/mount the camera or cables near an airbag panel or within the airbag’s working range. The manufacturer is not liable for any injury or death caused by the deployment of the airbag.

Dash Cam Recording Operation

Power On/Off

When you start the engine, the camera will turn on and begin recording automatically.
When you turn off the engine or unplug the charging cable from the power adapter, the camera will stop recording and turn off.
Long press [ ] button to power on or off the camera.

Loop Recording

Insert a microSD card into the camera’s card slot and automatic loop recording will begin once the camera detects power.
Time frame for each video file is 1 / 2 / 3 / 5 / 10 minutes.
When there is insufficient space on the MicroSD card, loop recording will automatically overwrite the oldest files (one by one).
Loop recording files are saved to SD card: \ DCIM \ MOVIE folder.

Emergency Recording

Automatic emergency recording
When the G-sensor is activated and a collision occurs, current footage will be locked automatically to avoid being overwritten by loop recording.
Manual emergency recording
Pressing the [ ] button during footage recording will lock current footage to avoid being overwritten by loop recording.

Note:
The collision sensing feature can be adjusted in settings under the “G-sensor” option via VIOFO App. Locked files are saved to SD card: DCIM \ Movie \ RO

Disable / Enable Audio Recording

Pressing the [ ] button once to turn off / on audio recording, [ ] LED light will be off / solid Red.

Parking Mode

There are three options for parking mode.

Auto Event Detection
The camera will automatically record a video sequence while a moving object is being detected during parking mode. It will stop recording when no new movement is detected.
Time Lapse Recording
Time-lapse record a video at low frames at 1 / 2 / 3 / 5 / 10 / 15 fps, it keeps recording continuously without audio recorded.
Note: Audio cannot be recorded in time-lapse mode.
Low Bitrate Recording
This mode records both video and audio using a low bitrate for the front, interior, and rear views. It records continuously using a small file size.

Note: Parking mode provides surveillance of your parked vehicle only when the engine is off and the USB Type-C Hardwire Kit is used to provide continuous power. The Hardwire Kit also protects your car battery from being drained. We recommend buying the VIOFO HK4 ACC hardwire kit cable for parking mode recording

Play and Manage Videos

Playback Video on VIOFO APP

Long press the Wi-Fi button to enable Wi-Fi. Connect Wi-Fi on your phone first. Open the VIOFO app and choose “Connect your camera” to use your phone to control the dashcam. You can play and manage files through the APP. You can check the app introduction refer to [Review and Control on Smartphone].

Playback Video on PC

Remove memory card from dashcam Before removing the memory card, make sure you have switched off the Dashcam.
Insert the memory card into a memory card reader connected to your PC.
Open the DCIM folder, using VLC or another video player to playback the video.

Video File Storage Location

Recording Mode	Behavior

Loop Recording

( Including Motion Detection )

| DCIM \ Movie
Emergency Recoding ( Locked Video )| DCIM \ RO
Parking recording ( Auto Event Detection / Time-lapse Recording / Low Bitrate Recording )| ****

DCIM \ Movie \ Parking

Snapshot| DCIM \ Photo

File Format Definition

Files recorded by front camera, interior and rear camera are saved separately.

Review and Control on Smartphone

Connect to Smartphone

The VIOFO app allows you to control your camera remotely by using a smartphone. Features include full camera control, live preview, playback and video recording.

Android Device

Android users can download the app from Google Play, or download the APK directly from our official website: https://www.viofo.com/content/13-app.

IOS Device

IOS users can download the app from the App store

Connect VIOFO APP

Long press the [ ] button to turn on the Wi-Fi. Wi-Fi name (SSID) of Wi-Fi is VIOFO_T130_XXXX, Wi-Fi default password is 12345678. When the Wi-Fi is on, Wi- Fi Status LED will be flashing blue.

Step 1: Use the phone to connect T130 Wi-Fi. When the phone is connected with the dashcam, the LED lights on the camera shows solid blue.
Step 2: Open VIOFO app and choose “Connect your camera” to use your phone to control the dashcam.
Step 3: Now you can see the live view of both cameras. You can change the settings and check the files on the app.

APP Layout Overview

Choosing “Connect your camera” to use your phone to control the dashcam.

Menu
Downloaded Video
VIOFO Official Facebook Page
Official Support
Firmware Update
Interior Camera Live Video
Rear Camera Live Video
Front Camera Live Video
Audio Recording Status
Motion detection Status
Switch Camera Video Source
Take a Video Snapshot
Go to Video File Lists
Start / Stop Recording
Go to System Settings
Video File Lists
Download Video Files
Delete Video Files

Install Optional Accessories

Install CPL

The CPL (Circular Polarizing Lens) can be used to reduce reflections and glare from the window glass and road surfaces that can otherwise damage image quality, this works in the same way as polarized sunglasses, getting more saturated and beautiful video.

When installing the CPL, you need to align the white mark on the CPL with the corresponding mark on the camera.

Install Bluetooth Remote Control

The remote control has an adhesive mount on the back, choose a suitable location on your dashboard to stick it to. Power on the camera and then press the video lock button on the remote control for 3 seconds to pair it with the camera, the LED indicator on the remote will turn blue if successfully paired.

Systems Setting

The camera setup is available in the VIOFO App. Connect the App as above, stop recording, then enter the settings menu

Video Setting

Resolution: Setting video resolution of footage recorded.
Front Camera + Interior Camera: 2560 1440P 30fps + 1920 1080P 30fps Front Camera + Interior Camera + Rear camera:
2560 1440P 30fps +1920 1080P 30fps + 1920 1080P 30fps
1920 1080P 30fps + 1920 1080P 30fps + 1920 1080P 30fps
Time-lapse Recording:
Record video from frames captured at specific time intervals to conserve memory and reduce the time it takes to review video. The default is off.
Loop Recording: Off / 1 / 2 / 3 / 5 / 10 minutes.
The recording will begin automatically after powering on with a microSD card in the device. Each recorded file is up to three minutes long, with old footage being replaced when microSD card storage is full.
Recording Audio:
Turn on and off the microphone. This can also be changed during recording by pressing the [ ] button.
Exposure:
Adjusting the value of the EV (Exposure Value) properly can create better footage under different light sources. It ranges from -2.0 to +2.0. You can adjust the EV for the front, interior, and rear camera separately. The default is set at 0.0.
WDR (Wide Dynamic Range):
On / Off. The dynamic range is the ratio of the brightest portion of the image to the darkest portion of the image. WDR enables the camera to deliver video with a near-perfect exposure in varying lighting situations.
G-Sensor:
The G-sensor measures shock forces and locks the video recorded at the time. The settings from “low to high” determine the amount of force needed to lock the file from being overwritten. We recommend that you set it at low.
Date Stamp:
On / Off. Imprint the time and date on the recorded video.
Bitrate:
You can set the bitrate for video. High bitrate may improve the quality and smoothness of the video, especially when recording fast motion or high contrast scenes. Using high bitrate mode may decrease the amount of recording time available on your memory card. Using a low bitrate will save space and record for a longer time.
Wi-Fi Channel: Off / 2.4GHz
Time Zone: Set the current time zone for GPS time and date calibration. Note: the time zone must be manually adjusted for daylight savings.
Time Synchronization: Time synchronization with a mobile phone.
Date Format: You can choose the date format of the camera
Boot delay: The camera will boot # seconds after being powered on. The settings are off / 5s / 10s.
IR LED: Off / On / Auto
By means, IR lights are always on, so the video color is black and white. Auto means the dash cam will decide to turn on/off infrared lights with different light conditions. Off means, the IR lights are all turned off. You can also short press the [ ] button to enable/disable the IR LED.
Parking Mode: There are 3 options under parking mode:
- Auto Event Detection
  The camera will automatically record a video sequence while a moving object is detected during parking. It will stop recording without new movements.
- Time Lapse recording
  Time-lapse record a video at low frames at 1 / 2 / 3 / 5 / 10 / 15 fps, It keeps recording continuously without audio recorded.
- Low Bitrate Recording
  This mode records video and audio at a low bitrate for the front, rear, and interior. It records continuously producing small file sizes.

Note: We recommend buying VIOFO HK4 ACC hardwire kit cable for parking mode recording. The parking recording files name of the front camera is Year_DateTimePF, Year_DateTimePI for the interior camera, and Year_DateTime**PR for the rear camera.

Enter Parking Mode Timer: Set the timer for entering parking mode. (Only for hardwire cable, if you use an external battery, this function will work.) “OFF” means the camera will enter parking mode right away when the engine is off. “90s” means the camera will enter parking mode 90 seconds after the engine is off.
Parking Recording Duration:
“On” means the camera will keep recording until the hardwire kits cut the power supply. “1 hour” means the camera will shut down 1 hour after it enters parking mode.
Parking G-Sensor:
The G-sensor detects significant or sudden movement (such as an impact or collision), it will trigger an event recording. We suggest setting it to High sensitivity in parking mode recording.
Parking Motion Detection:
Adjusts the sensitivity of the motion detection so minor motion caused by wind or rain doesn’t trigger a recording.
Image Rotation:
Turn the image upside down. You can set the Front, Interior and Rear camera image rotation separately.
Notification Sounds:
Off / Button beep only / Startup sound only / All on. You can enable/disable the button and startup sounds.
Voice Notification: turn on / off the voice notification. You can change the language setting through the voice notification language option.
Live Video Source: Front camera / Interior camera / Rear camera / All cameras.
GPS: Turn on / off the GPS logger. A GPS module is used to include the location data in the recorded videos. If disabled, your camera will no longer measure your speed and position; nor synchronize the time/date. (Only available when connecting with GPS signal) Please use “Dashcam Viewer” to playback videos and to visualize your position and speed on your computer.
Speed Unit: Kilometer per hour (KMH) and miles per hour (MPH) are available for the speed units.
GPS Info Stamp: Imprint the GPS information on the recorded video.
Camera Model Stamp: Imprint the camera model on the recorded video.
Frequency: Set it to minimize flickering and banding in the recorded video.
Format SD Card: The operation will delete all data on the MicroSD card. Note: Note: Once you format the card, all information will be deleted and
Reset Camera Settings: Reset all settings to default values.
Wi-Fi Name (SSID): Change the Wi-Fi name.
Wi-Fi Password: Change Wi-Fi Password. The Wi-Fi default password is 12345678.
Custom Text Stamp: Imprint the custom text on the recorded video.
Car License Number: Imprint the car number on the recorded video.
Free Space on Card: Show the remaining storage space on the microSD card.

Other

App Version: Check the current firmware version of the APP.
Firmware: Check the current firmware version of the camera.

Customer Service

Thanks for choosing VIOFO!
From the date of purchase on, all products are warranted for 12 months and all accessories are warranted for 3 months. VIOFO offers lifetime technical support for all our users. We are committed to making sure that you are 100% satisfied with our products and services.

Product Registration Program

VIOFO also has a Product Registration Program to help customers extend the warranty by 6 months. Visit www.viofo.com and register your new product to extend the warranty from 12 months to 18 months.

Your Opinion Matters

If you have any thoughts on how we can do even better, connect with us today at support@viofo.com.

Video Sharing

Share videos caught on the VIOFO camera with us. Let’s enjoy your newfound together! Gain a chance to get a mysterious gift at marketing@viofo.com.

How to Contact Us?

Submit a ticket at support.viofo.com Live chat box at www.viofo.com support@viofo.com www.facebook.com/viofo.world
+86 755 8526 8909 (CN)
Mon-Fri 9am-6pm