FREEPOWER Wireless Charging Platform User Manual

FREEPOWER Wireless Charging Platform

Product Information

Specifications:

• USB-C PD
• USB-C Cable Length (in)
• Product Weight (g)
• Product Dimensions (mm)
• Charge Performance
• Safety Features
• IP Rating
• Product Certifications

Product Usage Instructions

Configurations:

1. Flat: Place devices flat on the Alcantara surface.
2. Tilted (with Magnetic Stand): Attach the magnetic stand and place devices at an angle for charging.

Cable Management:
Route the cable through the stand and out the bottom for a neat setup.

Power On:

1. Plug the USB-C cable into the 65W USB-C power supply.
2. Connect the power supply to a power outlet.
3. Select and install the Type G or Type C Adapter by pushing the thumb lock, inserting the adapter, and releasing the lock.

Charging Devices :
To charge your devices, place them flat on the Alcantara surface of the charging platform.

• LED Status Indicator:
  An LED on the bottom side of the front edge indicates the charging status.

• Safety Information
  Follow safety guidelines provided in the manual to prevent any hazards during usage.

• Foreign Objects:
  Ensure no foreign objects are placed on the charging platform to prevent charging issues.

FAQ

• Q: What should I do if my device is not charging?
  A: Ensure that the device is placed flat on the Alcantara surface for charging. Devices placed over the aluminum frame may not charge.

• Q: How can I learn more about FreePower technology?

• A: Visit www.freepower.io to learn more about FreePower wireless charging technology used in the Tesla Wireless Charging Platform.

Wireless Charging Platform
Setup and User Manual (Europe and United Kingdom)

What’s in the box?

1. Charger
2. Magnetic Stand
3. 65W USB-C Power Supply
4. Type G (UK Power Adapter)
5. Type C (EU Power Adapter) Configurations
6. Flat
7. Tilted (with Magnetic Stand)

Cable Management With Stand

Route cable through the stand and out the bottom.

Power On

• Plug USB-C cable into 65W USB-C power supply
• Plug power supply into power outlet.
• Select and install the Type G or Type C Adapter by pushing the thumb lock to the right, inserting the adapter, and releasing the thumb lock after insertion.

Charge Devices

Place devices flat on Alcantara surface.

Device Not Charging
Devices placed over the aluminum frame will not charge.

LED Status Indicator

LED on bottom side of front edge indicates status.

FreePower Wireless Charging

• FreePower wireless charging is the technology inside that powers the Tesla Wireless Charging Platform.
• To learn more about FreePower, visit www.freepower.io

FCC Notice

This device complies with Part 15, Subpart C, of the FCC rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by Tesla could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

ISED Compliance Statement:
This device complies with Innovation, Science and Economic Development Canada
license-exempt RSS standard(s).

Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency Exposure:
This device meets the Innovation, Science and Economic Development Canada requirements for exposure to radio waves and is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy. To comply with Canada RF exposure compliance requirements, this device must not be co-located or operating in conjunction with any other antenna or transmitter.

References

• FreePower Wireless Charging

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>