Enerlites 58300-3K LED CFL Add On Remote Dimmer Switch Instruction Manual
- June 14, 2024
- ENERLITES
Table of Contents
INSTALLATION INSTRUCTIONS 58300-3K
Remote Dimmer
SPECIFICATIONS
Voltage ………………………………………………………………………….120VAC, 60Hz
Operating Temperature………………………………………………………….32°F-104°F
DESCRIPTION/ FEATURES
The 58300-3K is an add-on switch allows for multi-location dimming (requires 58300) to control a single Load.
OPERATIONS
Manual Control
This add-on dimmer switch allows the user to:
Turn ON/OFF and control the brightness level of the connected LED lighting.
– To turn ON the connected lighting: press top of the add-on dimmer switch
paddle and release.
– To brighten the connected lighting: press and hold the top of the add-on
dimmer switch paddle, release when desired level is achieved.
– To turn OFF the connected lighting: press bottom of the ad-on dimmer switch
paddle and release.
– To dim the connected lighting: press and hold the bottom of the add-on
dimmer switch paddle, release when desired level is achieved.
WARNING
Turn the POWER OFF at the circuit breaker before installing the Dimmer
Read and understand these instructions before installing. This device is
intended for installation in accordance with the National Electric Code and
local regulations. It is recommended that a qualified electrician performs
this installation.
Use copper wire only
WIRING DIRECTIONS
3-Way Wiring with 58300 dimmer
- Connect the HOT wire to the Hot terminal on the dimmer switch.
- Connect the NEUTRAL wire to the Neutral terminat on each switch.
- Connect the TRAVELER A wire to the Traveler terminal on the 3K switch.
- Connect the TRAVELER B to the existing Load wire, Traveler B is now Load.
- Connect the TRAVELER B wire the Load terminal on the dimmer switch.
- Connect the GROUND wire to Ground terminal on each switch.
- Mount the dimmer and 3K to the box with “Top” indicator pointing up.
- Tum on Circuit Breaker
WARRANTY INFORMATION
This device is warranted to be free of material and workmanship defects for 1
years from the date of purchase. Original receipt or proof of purchase from an
authorized retailer must be presented upon warranty claim. ALL claims must be
verified and approved by Enerlites, Inc. Warranties from other Enerlites
products may vary. This warranty is nontransferable and does not cover normal
wear and tear or any malfunction, failure, or defect resulting from misuse,
abuse, neglect, alteration, modification, or improper installation.
To the fullest extent permitted by the applicable state law, Enerlites shall
not be liable to the purchaser or end user customer of Enerlites products for
direct, indirect, incidental, or consequential damages even if Enerlites has
been advised of the possibility of such damages. Enerlites’ total liability
under this or any other warranty, express or implied, is limited to repair,
replacement or refund. Repair, replac-ement or refund are the sole and
exclusive remedies for breach of warranty or any other legal theory.
© 2023 Enerlites Inc. CA, U.S.A.
WWW.ENERLITES.COM
0205230226
REV 20230802
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>