Enerlites 62834 Double Rocker Switch Instruction Manual
- June 14, 2024
- ENERLITES
Table of Contents
Enerlites 62834 Double Rocker Switch
Product Information
- Double Rocker Switch Model: 62834
- Electrical Rating: 15A-120-277V AC
Product Usage Instructions
To ensure safe and proper usage of the Double Rocker Switch Model 62834, please follow the instructions below:
- Before installation, ensure that the power supply is turned off.
- Check the branch circuit rating to ensure it is suitable for a 15A load.
- For wiring connections, use solid #14 AWG copper wire.
- Do not use this switch with aluminum or stranded wire.
- Make sure the wire connections are secure and properly tightened.
- Ensure that the switch is compatible with the electrical system’s voltage range (120-277V AC).
- Follow local electrical codes and regulations during installation.
- If unsure about the installation process, consult a qualified electrician.
Please note that these instructions are a general guide. For specific installation steps or troubleshooting, refer to the complete user manual provided with the product.
Switch Diagram
Switch Instructions
NOTICE: For installation by a qualified person in accordance with
national and local electrical codes.
WARNING: Risk of Electric Shock or Death. Disconnect power before
installing.
CAUTION: USE COPPER CONDUCTORS ONLY; 15A, 14AWG to 12AWG.
- Remove insulation from conductors 5/8 inch.
- Push Wire: Use soild #14 AWG for 15A branch circuit ONLY.
©2020 Enerlites Inc. CA, U.S.A.
WWW.ENERLITES.COM
0201200173
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>