DEPSTECH DS360 Endoscope Inspection Camera User Manual
- June 14, 2024
- DEPSTECH
Table of Contents
DEPSTECH DS360 Endoscope Inspection Camera
Product Features
- DEPSTECH is a booming technology company, specialized in creating various endoscopes and committed to make you feel more secure.
- DS360 is a high-performance industrial endoscope, equipped with 4.3” IPS LCD Screen display, has the camera and video functions and saves into TF memory card (Micro-SD card). Such camera uses high-performance CMOS chip that supports the record-high frame rate to get clear images with Blurt 3.0 technology, widely used in industrial maintenance, appliance maintenance, mechanical maintenance and design and other fields
Special Warning and Notice
- This product is a camera of industrial endoscope, not applicable to medical or physical examination!
- In order to lengthen the battery life, it is recommended that you should charge the device once every 3 months whether it is used.
- Do not try to replace internal battery by yourself, because unprofessional operation may lead to risks of personal injury due to battery overheating, etc.
Safety and Protection
- Probe of camera is an electronic device of high precision, so please do not hit the probe of camera or pull the cables, which may lead to failure of the device.
- With IP67 waterproof layer, the probe shall be used with extra care and protected from scratches!
- Camera probe is made from materials that are not high temperature resistant, so make sure the internal temperature of any internal combustion engine or other equipment whose internal temperature is higher has been cooled when they are examined, otherwise the device will be directly damaged!
- In case of device damaged, please do not dismantle it by yourself, but contact the seller or the supplier for more professional maintenance services.
- Children may not use this device independently without the guidance of adults.
Operating and Storage Environments
- The device should be operated at an ambient temperature of 32~113℉ (0~45℃).
- The device should be stored in a dry, clean, oil-free and waterless place without any chemical liquid.
Product Introduction
-
•Hold this button for 2s to power on/off the endoscope.
-
•Single press to take a photo.
•Hold this button to start video record, and single press to end the video record. -
•Click to enter the setting menu.
-
•Click to dim the LED lights of the camera.
•Move the cursor up(In the menu). -
•Hold this button for 2s to enter the album.
•Click to confirm choices(In the menu). -
•Click to brighten the LED lights of the camera.
•Move the cursor down(In the menu). -
•Click to rotate the real-time image 180°.
•Return function(After entering the album/Settings menu, press this key to return to the previous level of operation interface).
•Hold this button for 2s to switch main/side camera(Only applicable to dual- lens products). -
Type-C Charging Port
- For charging (Type-C cable connected to the adapter).
- For data transmission (Type-C cable connected to PC client).
-
Charging Status LED indicator
- Red LED indicator flash: Charging status.
- Red LED indicator stay on: Charging finished.
-
Reset Button
- Short click the reset button with the reset pin, the device will be shut down.
-
TF Card Slot
-
- Support up to 32G TF card.
* Please format it for the first time of usage. **
**
UI Introduction
Preview
Tips :
Dual Lens : A:Main Lens B:Side Lens
Triple Lens: A:Main Lens B:Side Lens(B) C:Side Lens(C)
Album
Language Setting
Default language of the device is English; If other language is required,
please follow the steps below:
-
Click the button to enter menu interface, select Language by
pressing the / arrow button and then press the button, enter
the language setting interface. -
Click / button to select the language you need, and then press button to switch the language.
Photo/Video
- Take photos by pressing ****button.
- Long press to start a video recording, single press to the end video recording.
View Photo/Video
- Long press in preview mode to enter the photo album.
- Press / to view photos, Click to play videos.
- Press to exit the photo album.
Delete Photo/Video
-
When viewing photos/videos, press to enter the photo/video detail
page. -
Press / to choose to delete the current file or all files.
Lens Switching
(Only available for dual and triple lens products)
When the product is turned on the default open the main lens, long press the button 2s can switch the lens.
TF Card Formatting
1. On the preview interface, press the button to enter the menu;
2. Press / to select “Format” options;
3. Press to enter the option interface, Select “OK”;
4. Wait for the formatting to complete.
Copy Photo And Video Files To Computer
- Use a TF card reader to copy data directly
- Use a Type-C cable to connect to computer for copying Setting path.
{1) Please connect the product to your computer.
(1) Press the button to enter the menu.
(2) Select “ Data transmission ”.
(3) Press the button to start copying to computer.
If the device is not connected with computer, click “ Data transmission ”
on the setup interface, then USB icon shows up on the display; Please press
the button to exit.
It is normal for “NO SIGNAL” to appear on the screen when you press the
button to exit data transmission.
Charging Instructions
- Connect the device to the DC 5V adapter for charging;
- The red indicator light flashes when the device is charging, and is always on when fully charged.
Guide For Accessories Installation
Installation method:
Turn counterclockwise-remove protect cap
Turn clockwise-tighten accessories
Specifications
Model | Single Lens | Dual Lens |
---|---|---|
Screen Spec | 4.3” IPS LCD Screen | |
Camera Diameter | 7 mm (0.27 in) | 8 mm (0.31 in) |
**Focal Range** | 3-10 cm |
(1.18-3.93 in)
Photo Resolution| *19201080
Video Spec| 720 p / 15-30 fps
Camera View| 76°
Battery Life| 3-4 H
Charging Time| 3-4 H
Charging Voltage and Current| DC 5V/2A**
Packing List
FCC Requirement:
Changes or modifications not expressly approved by the part responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help
※ CE compliance: This device complies with EN 60065 standard, which means this device will not do harm to the user or products as following situations: 1)Electric shock 2)High temperature 3)Radiation 4)Explosion from inner 5)Mechanical Harm 6)Fire Hazard 7)Chemical burns.
※ EU Conformity Statement: This product and – if applicable – the
supplied accessories too are marked with “CE” and comply therefore with the
applicable harmonized European standards listed under the EMC Directive
2014/30/EC, the RoHS Directive 2011/65/EU and Amendment (EU) 2015/863.
※ WEEE Notice: 2012/19/EU (WEEE directive): Products marked with this
symbol cannot be disposed of as unsorted municipal waste in the European
Union. For proper recycling, return this product to your local supplier upon
the purchase of equivalent new equipment, or dispose of it at designated
collection points. For more information see:
www.recyclethis.info
※ 2013/56/EU (battery directive) : This product contains a battery that
cannot be disposed of as unsorted municipal waste in the European Union. See
the product documentation for specific battery information. The battery is
marked with this symbol, which may include lettering to indicate cadmium (Cd),
lead (Pb), or mercury (Hg). For proper recycling, return the battery to your
supplier or to a designated collection point.
For more information see: www.recyclethis.info
Customer Services
Please contact us if you have any questions, we love to hear from you
www.depstech.com
support@depstech.com
Facebook Official Page: @DEPSTECH.FANS
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>