Enerlites HET06-J6 Preset In Wall Countdown Timer Instruction Manual
- June 14, 2024
- ENERLITES
Table of Contents
Enerlites HET06-J6 Preset In Wall Countdown Timer
Product Information
The HET06-J6 is a preset in-wall countdown timer designed for easy installation by the National Electric Code and local regulations. This timer switch features 6 preset time buttons (1 Min, 5 Min, 10 Min, 20 Min, 30 Min, 60 Min) and 1 Manual ON button. It is suitable for use with most common lighting types and can replace a standard light or fan single pole switch. The timer automatically turns off the connected load when the selected time expires. LEDindicators next to each selected button provide visual feedback.
Product Usage Instructions
-
Installation
- Before installing the Timer, turn off the power at the circuit breaker.
- Read and understand the instructions before installation.
- It is recommended to have a qualified electrician perform the installation.
- Ensure the circuit breaker or fuse(s) are turned off and power is off before wiring the device.
- Use only copper wires for wiring.
-
Follow the wiring directions below:
- Connect the BLACK wire on the switch to the HOT wire.
- Connect the RED wire on the switch to the LOAD wire.
- Connect the GREEN wire on the switch to the GROUND wire.
-
Setting/Operating
- Press the desired time button once to turn on the load for the selected amount of time.
- When the time expires, the load will automatically turn off.
- Press the desired time button once to restart the countdown with the newly selected time.
-
Manual ON Button:
- Press the Manual ON button to turn on the load with the last selected timer preset.
- Press and release the Manual ON button to turn the load off.
- Press and release the button with the desired time once to keep the load on for that selected amount of time.
- The load will stay on until manually turned off or until the timer is overridden.
-
LED Light:
- The LED indicator light next to each selected button blinks twice when pressed to indicate the selected time.
-
Warranty Information
For warranty information, please visit www.enerlites.com- Model: HET06-J6
- Revision: 20230802
- Date: 0205210183
SPECIFICATIONS
- Voltage …………………………………………………………..………..… 120VAC, 60Hz Load(Single Pole Circuit)
- Tungsten…………………………………………………………………………………… 800W
- Resistive…………………………………………………………………………………….. 6.4A
- Electronic Ballast………………………………………………………………………. 800VA
- Motor ……………………………………………………………………………………… 1/4Hp
- Time Delay……………………………………………………….. 1,5,10,20,30,60minutes
- Humidity………………………………………………………… 95% RH, non-condensing
- Operation Temperature……………………………………………………. 32° F–131° F
DESCRIPTION
- The HET06-J6 is a timer switch with 6 preset time buttons and 1 Manual ON button.
- All Loads connected to this timer will automatically turn OFF when the selected time expires.
- The 6 selectable times are 1 Min, 5 Mins, 10 Mins,20 Mins, 30 Mins, 60 Mins
FEATURES
- Seven-button Preset Time Switch
- Time Delay
- 1, 5, 10, 20, 30, 60 minutes
- Replace a standard light or fan single-pole switch
- Work with most common lighting types
- Ideal for closet, pantry, garage, laundry room, outdoor lighting, and spa.
WARNING
- Turn the power off at the circuit breaker before installing the Timer.
- Read and understand these instructions before installing.
- It is recommended that a qualified electrician performs this installation.
- Make sure to turn off the circuit breaker or fuse(s) and make sure the power is off before wiring the device.
- “ Caution: High Voltage-Disconnect power supply before servicing”
- This device is intended for installation following the National Electric Code and local regulations.
- Use Copper wires ONLY
WIRING DIRECTIONS
- Connect the BLACK wire on the switch to the HOT wire.
- Connect the RED wire on the switch to the LOAD wire.
- Connect the GREEN wire on the switch to the GROUND wire.
SETTING/ OPERATING
- Preset Buttons: The LED indicator will blink twice to confirm each button press.
- There are 6 buttons with preset times of 1 Min, 5 Mins, 10 Mins, 20 Mins, 30 Mins, and 60 Mins.
- While the Load is OFF, press and release the button with the desired time once to turn the Load on for that selected amount of time.
- When the time expires, the Load will automatically turn off.
- While the Load is ON, press and release the button with the desired time once to restart the countdown with the newly selected time.
- Manual ON Button: The LED indicator will blink twice to confirm each button press.
- The Manual ON button is the large button located below the preset buttons.
- While the Load is OFF, press and release the Manual ON button to turn the Load ON with the last selected timer preset.
- While the Load is ON, press and release the Manual ON button to override the timer and turn the Load OFF.
- To hold the Load ON: Press and hold the Manual ON button for 8 seconds. The
- The load will turn ON and stay ON. The timer WILL NOT turn the Load OFF.
- Press and release the Manual ON button to turn the Load OFF.
- Press and release the button with the desired time once to keep the Load on for that selected amount of time.
- LED Light: the LED indicator light next to each selected button blinks twice each time it is pressed to mark the time selected.
WARRANTY INFORMATION
- This device is warranted to be free of material and workmanship defects for 2 years from the date of purchase.
- An original receipt or proof of purchase from an authorized retailer must be presented upon warranty claim.
- ALL claims must be verified and approved by Enerlites, Inc.
- Warranties from other Enerlites products may vary.
- This warranty is non-transferable and does not cover normal wear and tear or any malfunction, failure, or defect resulting from misuse, abuse, neglect, alteration, modification, or improper installation.
- To the fullest extent permitted by the applicable state law, Enerlites shall not be liable to the purchaser or end-user customer of Enerlites products for direct, indirect, incidental, or consequential damages even if Enerlites has been advised of the possibility of such damages.
- Enerlites’ total liability under this or any other warranty, express or implied, is limited to repair, replacement, or refund.
- Repair, replacement, or refund are the sole and exclusive remedies for breach of warranty or any other legal theory
CONTACT
- © 2021 Enerlites Inc.
- CA, U.S.A.
- WWW.ENERLITES.COM.
- 0205210183
- REV 20230802
- HET06-J6
- Preset In-Wall Countdown Timer
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>