Enerlites 975501 Series 4 Inch Dia Round Screw Cap Floor Box Cover Instruction Manual
- June 14, 2024
- ENERLITES
Table of Contents
Enerlites 975501 Series 4 Inch Dia Round Screw Cap Floor Box Cover
Product Information
The product is a 4-inch diameter round screw cap floor box cover with a 20A duplex tamper and weather-resistant receptacle. It includes a flush round flip lid cover plate, one 20 amp duplex tamper and weather-resistant receptacle, a gasket, and a cover.
Specifications:
- Cover Material: Flush round flip lid cover plate with duplex tamper and weather-resistant receptacle
- Receptacle: 20A duplex tamper and weather-resistant receptacle
- Dimensions: 4 inches (101.48mm) in diameter
Product Usage Instructions
- Before Installation:
- Ensure there is sufficient depth and space below the sub-floor.
- Trace outline of the box on the sub-floor.
- Following the outline, cut the box shape without the ears completely through the sub-floor.
- Remove knockout(s) for cables and use cable clamps or grommets to secure wires to the metal box.
- Secure the metal box to framing using wood screws.
- Follow the wiring directions below and connect the wires to appropriate terminals on the receptacle:
- Ground (Green or bare wire)
- Neutral (White wire)
- Hot (Black wire)
- Secure the receptacle to the metal box.
- Install the cover using the provided screws.
Note:
Read and understand these instructions before installing. This device is
intended for use by qualified personnel only. Always turn off the power at the
circuit breaker or fuse(s) and ensure that the power is off before wiring the
device. Use copper wire only.
For any further assistance or inquiries, please refer to the product manual or contact customer support.
SPECIFICATIONS
- Cover Material ……………………………….. Brass(C) or Nickel-Plated Brass(S)
- Receptacle Rating ……………………………….. 20A 125VAC
DESCRIPTION/ FEATURES
Flush round flip lid cover plate with duplex tamper & weather resistant receptacle. Includes one 20 amp duplex tamper & weather resistant receptacle, gasket and cover.
- Compact and stylish design in Brass(C) or Nickel-Plated Brass(S). Height of metal box is adjustable for ease of installation.
- Corrosion resistant hardware ensures long life span and reliable performance. Easy access to power when you need it. Close and lock the cover when not in use.
WARNING
Turn the POWER OFF at the circuit breaker before installing the Floor Box
Read and understand these instructions before installing. This device is intended for installation in accordance with the National Electric Code and local regulations. It is recommended that a qualified electrician performs this installation. Make sure to turn off the circuit breaker or fuses) and make sure power is off before wiring the device. Use copper wire ONLY.
NOTES:
10-12 AWG Stranded or Solid Copper wire is recommended.
DIMENSIONS
FLOOR BOX INSTALLATION
Before Installation:
Ensure there is sufficient depth & space below the sub-floor.
- Trace outline of box on sub-floor.
- Following the outline, cut the box shape without the ears completely through the sub-floor
- Remove knockout(s) for cables and use cable clamps or grommets to secure wires to the metal box.
- Secure the metal box to framing using wood screws.
- Follow the wiring directions and connect the wires to appropriate terminals on the receptacle.
- Secure receptacle to metal box and install cover using provided screws.
WIRING DIRECTIONS
- Insert wire(s) through terminal holes in the back, then tighten terminal screws.
- Connect HOT wire to the HOT terminal (brass screw).
- Connect NEUTRAL wire to the NEUTRAL terminal (silver screw).
- Connect GREEN or BARE wire to the GROUND terminal (green screw).
WARRANTY INFORMATION
This device is warranted to be free of material and workmanship defects for 2 years from the date of purchase. Original receipt or proof of purchase from an authorized retailer must be presented upon warranty claim. ALL claims must be verified and approved by Enerlites, Inc. Warranties from other Enerlites products may vary. This warranty is nontransferable and does not cover normal wear and tear or any malfunction, failure, or defect resulting from misuse, abuse, neglect, alteration, modification, or improper installation. To the fullest extent permitted by the applicable state law, Enerlites shall not be liable to the purchaser or end user customer of Enerlites products for direct, indirect, incidental, or consequential damages even if Enerlites has been advised of the possibility of such damages. Enerlites’ total liability under this or any other warranty, express or implied, is limited to repair, replacement or refund. Repair, replacement or refund are the sole and exclusive remedies for breach of warranty or any other legal theory.
© 2016 Enerlites Inc.
CA, U.S.A.
- WWW.ENERLITES.COM
- 0212200157-01
REV 20230802
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>