Vtech PAW Patrol Chase The Rescue Instructions

Instruction Manual
Chase to the Rescue

PAW Patrol Chase The Rescue

© 2023 Spin Master PAW Productions Inc. All Rights Reserved. PAW Patrol and all related titles, logos and characters are trademarks of Spin Master Ltd. Nickelodeon and all related titles and logos are trademarks of Viacom International Inc.

INTRODUCTION

Thank you for purchasing the Chase to the Rescue toy. Go on missions to help save Farmer Yumi’s barn, rescue Jake and more with your favorite pup! Use the Pup Pad, net launcher, megaphone and compass to help save the day.

INCLUDED IN THE PACKAGE

• Chase to the Rescue
• Quick Start Guide

WARNING
All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords and packaging screws are not part of this toy, and should be discarded for your child’s safety.
NOTE
Please save this Instruction Manual as it contains important information.
WARNING:
CHOKING HAZARD—Small parts. Not for children under 3 yrs.

Unlock the Packaging Locks

1. Turn the packaging locks counterclockwise several times.
2. Pull out the packaging locks and discard.

GETTING STARTED

Slide the On/Off/Mode Selector to start playing.
Before playing for the first time, please insert 2 new “AAA” sized alkaline batteries. (The “AAA” sized batteries included in the unit are for demo purposes only and are not long life batteries.)
WARNING:
Adult assembly required for battery installation. Keep batteries out of reach of children.

Battery Removal and Installation

1. Make sure the unit is turned Off.
2. Find the battery cover located on the back of the unit, use a screwdriver to loosen the screw, and then open the battery cover.
3. Remove old batteries by pulling up on one end of each battery.
4. Install 2 new AAA (AM-4/LR03) batteries following the diagram inside the battery box. (For best performance, alkaline batteries or  fully charged Ni-MH rechargeable batteries are recommended).
5. Replace the battery cover and tighten the screw to secure.

IMPORTANT: BATTERY INFORMATION

• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries• Only batteries of the same or equivalent type as recommended are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in fire.

RECHARGEABLE BATTERIES

• Remove rechargeable batteries (if removable) from toy before charging.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not charge non-rechargeable batteries.

PRODUCT FEATURES

1. On/Off/Mode Selector
   Slide the On/Off/Mode Selectorto a mode position to turn the unit ON. Choose from Mission mode [ ] or Learning mode [ ] by sliding the selector. To turn the unit OFF [ ], slide the switch to OFF [ ].

2. Badge Button
   In Learning mode, press the Badge Button to hear Chase tell you about himself, his favorite things and catchphrases. In Mission mode, press the Badge Button to play a question and answer game.

3. Collar Button
   In Learning mode, press the Collar Button to hear Chase share his daily life with you. In Mission mode press the Collar Button to start a mission and choose the right tool for the job.

4. Rescue Tools
   Place the Megaphone, Net Launcher,Pup Pad and Compass in Chase’s Pup Pack to hear him describe each tool and how it works.

5. Automatic Shut-Off
   To preserve battery life, the unit will automatically shut off after several minutes without input. The unit can be turned on again by pressing any button or sliding the mode selector.

NOTE
If the unit powers down or if the light fades out during play, please installa new set of batteries.

ACTIVITIES

1. Learning Mode
   Hear about Chase and his daily life. Chase tells you about his favorite things, his catchphrases, his tools and his rescue missions. You can place the rescue tools in Chase’s Pup Pack and learn how to finish the mission with the right tool.

2. Mission Mode
   Go on a mission to finish Chase’s training or receive Ryder’s call from the Pup Pad and help save the day. Press the Badge Button and Chase will ask you questions about himself and you can tell him the right answer. Press the Collar Button to start a rescue mission and choose the right tool for the job.

CARE & MAINTENANCE

1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat sources.
3. Remove the batteries if the unit will not be in use for an extended period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.

TROUBLESHOOTING

If for some reason the unit stops working or malfunctions, please follow these steps:

1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit On. The unit should now be ready to use again.
5. If the unit still does not work, install a new set of batteries.

IMPORTANT NOTE:
If the problem persists, please call our Consumer ServicesDepartment at 1-800-521-2010 in the U.S., 1-877-352-8697 in Canada, or by going to our website vtechkids.com and filling out our Contact Us form located under the Customer Support link. Creating
and developing VTech products is accompanied by a responsibility thatwe take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. Howevererrors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to contact us with any problems and/or suggestions you might have. A service representativewill be happy to help you.

NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC RulesThese limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for helpCaution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Trade Name: VTech®
Model: 5631
Product Name: PAW Patrol Chase to the Rescue
Responsible Party: VTech Electronics North America, L.L.C.
Address: 1156 W. Shure Drive, Suite 200 Arlington Heights, IL 60004
Website: vtechkids.com

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
CAN ICES-003(B)/NMB-003(B)

CONSUMER SERVICES

Creating and developing VTech® products is accompanied by a responsibility that we at VTech® take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department with any problems and/or suggestions that you might have. A service representative will be happy to help you.
Australian Customers:
Phone: 1800 862 155
Website: support.vtech.com.au
NZ Customers:
Phone: 0800 400 785
Website: support.vtech.com.au

PRODUCT WARRANTY/ CONSUMER GUARANTEES

Australian Customers:
VTECH ELECTRONICS (AUSTRALIA) PTY LIMITED – CONSUMER GUARANTEES
Under the Australian Consumer Law, a number of consumer guaranteesapply to goods and services supplied by VTech Electronics (Australia) Pty Limited. Please refer to vtech.com.au/consumerguarantees for further information.

Visit our website for more information about our products, downloads, resources and more.
vtechkids.com
vtechkids.ca
www.vtech.com.au
Read our complete warranty policy online at
vtechkids.com/warranty
vtechkids.ca/warranty
TM & © 2023 VTech Holdings Limited.
All rights reserved.
IM-563100-000
Version:0

References

• Corepile, collecte et le recyclage des piles et petites batteries en France
• VTech- jouets éducatifs et électroniques
• VTech Canada | Jeux et Jouets educatifs pour enfants | Jouets d'eveil

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>