Kraus KVF-1220 Single Handle Vessel Bathroom Sink Faucet Instruction Manual

June 14, 2024
Kraus

Kraus LOGO

KVF-1220 Single Handle Vessel Bathroom Sink Faucet
Instruction Manual

KVF-1220 Single Handle Vessel Bathroom Sink Faucet

Kraus KVF 1220 Single Handle Vessel Bathroom Sink
Faucet

Ramus™ Single Handle
Vessel Faucet
KVF-1220

Congratulations on the purchase of your new Kraus® plumbing fixture!
Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product:

Kraus KVF 1220 Single Handle Vessel Bathroom Sink Faucet -
ICONDO NOT RETURN TO STORE

Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com
Have the model number available and retain a copy of your receipt with purchase date for reference.
If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit.

Prior to Installation:

  • Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus ® Customer Service at 800-775-0703 for a replacement.
  • Read all instructions and safety warnings and ensure you have all tools, parts, and equipment necessary for a safe installation.
  • Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet.
  • Pre-drilled hole size requirement: 1 3/8″ (min)
    Max countertop thickness: 2 1/2”

For technical assistance or replacement parts, please contact Kraus Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or Customerservice@kraususa.com
Tools Required

Kraus KVF 1220 Single Handle Vessel Bathroom Sink Faucet - Tools
Required

Care & Maintenance

*To keep the product clean & shining, follow the steps below:

  1. Rinse with clean water & dry with a soft cloth
  2. Do not clean with soaps, acid, polish, abrasives or harsh cleaners
  3. Do not use cloth with a coarse surface
  4. Unscrew the aerator and clean when necessary
  • This installation manual is subject to change without further notice.

Diagram and Parts List

Kraus KVF 1220 Single Handle Vessel Bathroom Sink Faucet - Parts
List

A. Faucet Body
B. Aerator
C. Flange
D. Plastic Washer
E. Metal Washer| F. Mounting Nut
G. Screws
H. Hex Wrench
I. Drain
---|---

Faucet Dimensions

Kraus KVF 1220 Single Handle Vessel Bathroom Sink Faucet - Faucet
Dimensions

Installer Tip:
Shut off main water supply before installing new faucet.

Drain Dimensions

Kraus KVF 1220 Single Handle Vessel Bathroom Sink Faucet - Drain
Dimensions

Installer Tip:
Shut off main water supply before installing new drain.
Step 1: Remove washers and mounting nut

Kraus KVF 1220 Single Handle Vessel Bathroom Sink Faucet - Step
1

Shut off the water supply. Remove the old faucet. Clean the mounting surface. Remove the mounting nut & screws (F&G), metal washer (E) and plastic washer (D) from the faucet (A).
Step 2: Installing the faucetKraus KVF 1220 Single Handle Vessel Bathroom
Sink Faucet - Tools Required1

Place the faucet (A) through the hole in the countertop. Secure the faucet (A) to the countertop using the plastic washer (D), metal washer (E) and mounting nut (F) provided. Tighten screws (G).
Step 3: Connect waterlines to main valve

Attach waterlines to angle stops and tighten until snug. Turn on angle stops and check for leaks (DO NOT TURN FAUCET ON).
NOTE: Please make sure filter washers are installed before connecting to the main valve.
Step 4: Install Press pop-up assembly

Kraus KVF 1220 Single Handle Vessel Bathroom Sink Faucet -
Step3

Unscrew the nut (6) from the pop-up body (2), move over the tail pipe (7) and washer (5), then unscrew the coupling nut (4) and remove the washer (3).
Step 4: Install Press pop-up assembly – continued

Kraus KVF 1220 Single Handle Vessel Bathroom Sink Faucet -
Step4

Place the washer (1) underneath the flange of the pop-up body (2). Slide the pop-up body (2) down through the drain hole on the vessel or basin sink. From the underside of the sink, slide the washer (3) against the bottom of the vessel or  basin sink, thread on the coupling nut (4) and tighten. Do not overtighten.
Slide the nut (6) over the tail pipe (7). Place the washer (5) into the nut and tighten. Do not overtighten.
Step 5: Flush faucet

After installing faucet, remove aerator (B) with a coin. Turn water on for 30 seconds to remove any debris. Reassemble aerator (B).

Replacement Parts

Kraus KVF 1220 Single Handle Vessel Bathroom Sink Faucet -
Parts

Replacement Parts List Finish / Color Part #
1. Cover Button GR, BL* KP27159
2. Set Screw KP27158
3. Handle SFS, MB, GM, BG* KP27157
4. Cap & 0-ring SFS, MB, GM, BG* KP27160
5. Bonnet Nut KP27161
6. Cartridge KP27162
7. Aerator KP27163
8. Flange SFS, MB, GM, BG* KP27164
9. Plastic Washer KP27146
10. Metal Washer KP27147
11. Mounting Nut & Screw KP27148
12. Hex Wrench KP27166
13. Drain SFS, MB, GM, BG* KP27059
14. Filter Washer KP27167

*Denotes faucet component color options:
SFS – Spot Free Stainless Steel
MB – Matte Black
GM – Gunmetal
BG – Brushed Gold
GR – Grey
BL – Black

Troubleshooting

If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:

PROBLEM CAUSE ACTION
Leakage under the handle. Bonnet nut (5) has come loose. Remove the cover

button (1). Loosen set screw (2) with hex wrench (12). Remove the handle (3). Unscrew cap (4) (by hand only). Tighten bonnet nut (5) with an adjustable wrench.
Aerator drips or has inconsistent water flow pattern.| Aerator (7) is dirty or not seated properly| Unscrew aerator (7) with a coin and clean out debris.
Water will not shut off completely.| Cartridge may need to be adjusted or replaced| Remove the cover button (1). Loosen set screw (2) with hex wrench (12). Remove the handle (3). Unscrew cap (4) (by hand only). Loosen the bonnet nut (5) with an adjustable    wrench.  Remove  the cartridge (6). Check for cracks.
There is leaking from the sink drain at the base of the sink.| The sink has a rough or irregular surface.| Apply additional silicone sealant to the beveled side of the drain flange.
Retighten and test for leaks.
There is a low flow of water.| The filter washers in the hose connectors are dirty.| Turn off the water supply at the water valves and unscrew the hose connectors from the water supply lines. Clean the filter  washers in the water lines with hot water, removing any debris or calcium build up.

Codes/Standards Applicable:

Kraus KVF 1220 Single Handle Vessel Bathroom Sink Faucet -
ICON1

Faucet – Lifetime Limited Warranty
Kraus USA Plumbing, LLC (“Kraus”) extends this warranty to the original purchaser for personal household use of the Faucet when purchased from an authorized Kraus dealer and in the location of original installation. This warranty is non-transferable.
Kraus warrants the structure and finish of the Faucet to be free from defects in material and workmanship under normal usage for as long as the original purchaser resides in the residence in which the Faucet was first installed.
Kraus warrants the Faucet’s sprayhood assembly (including the engine, aerators, structure, restrictors, back flow preventers, sprayer hoses, braided supply line hoses which encompasses nylon, silicon and stainless steel) of the product to  be free from defects in material and workmanship under normal usage for a period of one (1) year from the date of purchase.
Kraus warrants the Faucet’s cartridge to be free from defects in material and workmanship under normal usage for a period of five (5) years from the date of purchase.
Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus.
Commercial Warranty
Kraus USA Plumbing, LLC (“Kraus”) warrants its Products for a period of one (1) year to commercial purchasers of Products used in industrial, commercial and business applications.
Care and Cleaning Instructions
Certain cleaning products may cause damage to a Product’s finish and use of the following on the Product will void this warranty:

  • Abrasive cleaners such as powders, bleach, ammonia, alcohol or chorine
  • Abrasive pads, steel wool or wire brushes

What is Not Covered
This warranty does not cover Products that were discontinued when purchased or display Products, whether such Products were purchased at discount outlets, unauthorized dealers, and/or sold on clearance. This warranty does not cover any free gifts included with purchase.
This warranty does not cover damage resulting from neglect, misuse (including use for an unintended application), abuse, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, improper maintenance, alteration of the Product, or failure to follow care, cleaning or installation instructions enclosed with your Product. Kraus recommends that all Kraus Products be installed by a fully licensed and insured trade professional with experience  in the installation of bathroom and/or kitchen manufactured goods.
How to Make a Warranty Claim
If you are a consumer purchaser, please contact a Kraus Customer Service Representative at:
Kraus USA Plumbing, LLC
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
Customerservice@kraususa.com
If you are a plumbing contractor or trade professional, please contact a Kraus Pro Representative at:
Kraus USA Plumbing, LLC
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
Proservice@kraususa.com
If you are an authorized partner, please contact a Partner Support Representative at:
Kraus USA Plumbing, LLC
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
Partnersupport@kraususa.com
In requesting warranty service, please be ready to provide your proof of purchase and a description of the problem. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto  Rico shipping charges may apply).
International shipping fees are not included.
Limitation on Duration of Implied Warranties
Please note that some states/provinces (including Quebec) do not allow limitations on how long an implied warranty lasts, so the below limitations may not apply to you. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE  LAW, ANY IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO THE STATUTORY PERIOD OR THE DURATION OF THIS  WARRANTY, WHICHEVER IS SHORTER.
Limitation of Special, Incidental or Consequential Damages
Please note that some states/provinces (including Quebec) do not allow the exclusion or limitation of special, incidental or consequential damages, so the below limitations and exclusions may not apply to you. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER, AND KRAUS USA PLUMBING, LLC SHALL NOT BE LIABLE FOR, ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING  LABOR CHARGES TO REPAIR, REPLACE, INSTALL OR REMOVE THIS PRODUCT), WHETHER ARISING OUT OF BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, BREACH OF CONTRACT, TORT, OR OTHERWISE.
This warranty gives you specific legal rights, and you may also have other rights which vary from state/province to state/province.
Download the Kraus Care & Maintenance Guide at: http://www.kraususa.com/maintenance

IMPORTANT
Register Your Kraus Product
Activate Your Warranty
Access Premium Customer Support
Get Product Information
REGISTER TODAY
http://www.kraususa.com/registrationKraus LOGOwww.kraususa.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals