Kraus KBF-1211 Esta Single Handle Bathroom Faucet Instruction Manual
- June 14, 2024
- Kraus
Table of Contents
Kraus KBF-1211 Esta Single Handle Bathroom Faucet
Congratulations on the purchase of your new R Kraus plumbing fixture!
Please keep the box and packaging materials until your product is completely
installed. If you have any questions, require technical assistance or have any
problems with your product:
DO NOT RETURN TO STORE
Please contact our Customer Service Team at 1-800-775-0703 / customerservice@kraususa.com Have the model number available and retain a copy of your receipt with the purchase date for reference. If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit.
Before Installation
- Make sure you have all the necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement.
- Read all instructions and safety warnings and ensure you have all the tools, parts, and equipment necessary for a safe installation.
- Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built-up pressure. Remove the existing faucet.
- Pre-drilled hole size requirement: 1 3/8″ (min)
- Max countertop thickness: 2 1/2”
For technical assistance or replacement parts, please contact Kraus Customer Service and one of our representatives will be happy to help: Toll-Free: 800-775-0703 or Customerservice@kraususa.com
Tools Required
Care & Maintenance
- To keep the product clean & shining, follow the steps below:
- Rinse with clean water & dry with a soft cloth
- Do not clean with soaps, acid, polish, abrasives or harsh cleaners
- Do not use cloth with a coarse surface
- Unscrew the aerator and clean it when necessary
- This installation manual is subject to change without further notice.
Diagram and Parts List
- A. Faucet Body
- B. Aerator
- C. Aerator Key
- D. Metal Washer
- E. Lock Nut
- F. Spanner Key
- G. Hex Wrench
Diagram and Parts List-Lift Rod Drain
- a. Waste Stopper
- b. Drain Flange
- c. Rubber Washer
- d. Concave Washer
- e. Metal Washer
- f. Mounting Nut
- g. Tail Pipe
- h. Top Hat Washer
- i. Drain Off Pole
- j. Washer
- k. Retaining Nut
- l. Clip
- m. Extender Rod
- n. Thumb Screw
- o. Lift Rod
Faucet Dimensions
Installer Tip:
Shut off the main water supply before installing a new faucet.
Drain Dimensions
Installer Tip:
Shut off main water supply before installing new drain.
INSTALLATION INSTRUCTION
Step 1: Remove the lock nut
- Shut off the water supply. Remove the lock nut (E) from the faucet (A).
Step 2: Installing the faucet
Place the faucet (A) through the hole in the sink. Secure the faucet (A) to the sink using the metal washer (D) and lock nut (E) provided. Tighten the lock nut (E) with the spanner key (F) provided. Ensure there is no interference between the metal washer (D) and hoses.
Step 3: Connect waterlines to the main valve
Attach waterlines to angle stops and tighten until snug. Turn on angle stops and check for leaks (DO NOT TURN FAUCET ON).
NOTE: Please make sure filter washers are installed before connecting to the main valve.
Step 4A: Installing the drain
Remove the waste stopper (a) and drain flange (b) from the tail pipe (g). Remove the concave washer (d), metal washer (e) and mounting nut (f) from the drain flange (b).
Step 4B: Installing the drain
Insert the drain flange (b) through the drain hole with the rubber washer (c) attached. From underneath, place the concave (d) and metal washer (e) on the drain flange. Secure the mounting nut (f). Thread the tail pipe (g) onto the drain (b) and hand tighten.
Step 4C: Installing the drain
Insert the waste stopper (a) into the drain flange. Remove the extender rod (m) and clip (I) from the drain off the pole (i). Remove the nut (k). Insert the drain off pole (i) into the drain pole opening of the tail pipe (g). See insert
- Secure the nut (k) to the drain off pole opening of the tailpipe (g).
Step 4D: Installing the drain
Insert the lift rod (o) through the spout and connect with the extender rod (m). Tighten the thumb screw (n).
Step 4E: Installing the drain
Attach the drain off pole (i) to the
extender rod (m) with the clip (I).
Step 4F: Installing the drain
Loosen the thumb screw (n) on the extender rod (m). Push down on the lift
rod (o) until the stopper is in the open position. Retighten the thumb screw
(n).
Step 5: Flush faucet
After installing the faucet, remove the aerator (B) with the included aerator key (C). Turn the water on for 30 seconds to remove any debris. Reassemble the aerator (B).
Replacement Parts
- Denotes faucet component colour options: SFS – Spot Free Stainless Steel
- MB – Matte Black
- GM – Gunmetal
- BG – Brushed Gold
- SFSB – Spot Free Black Stainless
- GR – Grey
- BL – Black
Troubleshooting
If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:
PROBLEM
|
CAUSE
|
ACTION
---|---|---
Leakage under the handle.| Bonnet nut (5) has come| Remove the cover button
(1). Loosen set
| loose.| screw (2) with hex wrench (12). Remove the
| | handle (3). Unscrew cap (4) (by hand only).
| | Tighten bonnet nut (5) with an adjustable
| | wrench.
The aerator drips or has an inconsistent water flow pattern.| Aerator (8) is
dirty or not seated properly.| Unscrew the aerator (8) with the aerator wrench
(9) and clean out the debris.
The water will not shut off completely.| The cartridge may need to be adjusted
or replaced.| Remove the cover button (1). Loosen set screw (2) with hex
wrench (12). Remove the handle (3). Unscrew cap (4) (by hand only). Loosen the
bonnet nut (5) with an adjustable wrench. Remove the cartridge (7). Check for
cracks.
There is a low flow of water.| The screen filters in the hose connectors are
dirty.| Turn off the water supply at the water valves and unscrew the hose
connectors from the water supply lines. Clean the screens in the water lines
with hot water, removing any debris or calcium buildup.
There is leaking from the sink drain at the base of the sink.| The sink has a
rough or irregular surface.| Apply additional silicone sealant to the beveled
side of the drain flange.
Retighten and test for leaks.
Codes/Standards Applicable
Faucet – Lifetime Limited Warranty
Kraus USA Plumbing, LLC (“Kraus”) extends this warranty to the original
purchaser for personal household use of the Faucet when purchased from an
authorized Kraus dealer and in the location of the original installation. This
warranty is non-transferable. Kraus warrants the structure and finish of the
Faucet to be free from defects in material and workmanship under normal usage
for as long as the original purchaser resides in the residence in which the
Faucet was first installed. Kraus warrants the Faucet’s sprayed assembly
(including the engine, aerators, structure, restrictors, backflow preventers,
sprayer hoses, and braided supply line hoses which encompasses nylon, silicon
and stainless steel) of the product to be free from defects in material and
workmanship under normal usage for one (1) year from the date of purchase.
Kraus warrants the Faucet’s cartridge to be free from defects in material and
workmanship under normal usage for five (5) years from the date of purchase.
Any product reported to the authorized dealer or to Kraus as being defective
within the warranty period will be repaired or replaced with a product of
equal value at the option of Kraus.
Commercial Warranty
Kraus USA Plumbing, LLC (“Kraus”) warrants its Products for one (1) year to
commercial purchasers of Products used in industrial, commercial and business
applications.
Care and Cleaning Instructions
Certain cleaning products may cause damage to a Product’s finish and use of
the following on the Product will void this warranty:
- Abrasive cleaners such as powders, bleach, ammonia, alcohol or chorine
- Abrasive pads, steel wool or wire brushes
What is Not Covered
This warranty does not cover Products that were discontinued when purchased or display Products, whether such Products were purchased at discount outlets, unauthorized dealers, and/or sold on clearance. This warranty does not cover any free gifts included with purchase. This warranty does not cover damage resulting from neglect, misuse (including use for an unintended application), abuse, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, improper maintenance, alteration of the Product, or failure to follow care, cleaning or installation instructions enclosed with your Product. Kraus recommends that all Kraus Products be installed by a fully licensed and insured trade professional with experience in the installation of bathroom and/or kitchen manufactured goods.
How to Make a Warranty Claim
If you are a consumer purchaser, please contact a Kraus Customer Service
Representative at: Kraus USA Plumbing, LLC 12 Harbor Park Drive Port
Washington, NY 11050 Toll-free
800-775-0703Customerservice@kraususa.com
If you are a plumbing contractor or trade professional, please contact a Kraus
Pro Representative at:
- Kraus USA Plumbing, LLC
- 12 Harbor Park Drive
- Port Washington, NY 11050
- 516-801-8955
- Proservice@kraususa.com
If you are an authorized partner, please contact a Partner Support Representative at:
- Kraus USA Plumbing, LLC
- 12 Harbor Park Drive
- Port Washington, NY 11050
- 516-801-8954
- Partnersupport@kraususa.com
In requesting warranty service, please be ready to provide your proof of purchase and a description of the problem. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.
Limitation on Duration of Implied Warranties
Please note that some states/provinces (including Quebec) do not allow
limitations on how long an implied warranty lasts, so the below limitations
may not apply to you. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ANY
IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF
FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO THE STATUTORY PERIOD OR THE
DURATION OF THIS WARRANTY, WHICHEVER IS SHORTER.
Limitation of Special, Incidental or Consequential Damages
Please note that some states/provinces (including Quebec) do not allow the
exclusion or limitation of special, incidental or consequential damages, so
the below limitations and exclusions may not apply to you. TO THE MAXIMUM
EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER, AND KRAUS
USA PLUMBING, LLC SHALL NOT BE LIABLE FOR, ANY SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES (INCLUDING LABOR CHARGES TO REPAIR, REPLACE, INSTALL OR
REMOVE THIS PRODUCT), WHETHER ARISING OUT OF BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY, BREACH OF CONTRACT, TORT, OR OTHERWISE. This warranty gives you
specific legal rights, and you may also have other rights that vary from
state/province to state/province.
Download the Kraus Care & Maintenance Guide at: http://www.kraususa.com/maintenance
Register Your Kraus Product
- Activate Your Warranty
- Access Premium Customer Support
- Get Product Information
REGISTER TODAY
References
- Kraus | Kitchen and Bathroom | Sinks, Faucets, and Accessories
- Care & Maintenance | Well-crafted products | Light maintenance.
- Kraus USA Self Help
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>