EarFun Air Pro 3 ANC Earbuds Wireless User Manual
- June 14, 2024
- EarFun
Table of Contents
Air Pro 3 ANC Earbuds Wireless User Manual
Qualcomm® aptX™ Adaptive
EarFun Audio App
Download the EarFun Audio app for an enhanced experience.
- Equalizer tuning, customizing touch controls
- Firmware updates, earbuds and charging case battery status
- Less data tracking, personalized device name
- Built-in feedback, and more
How to Fit
Note:
- Please choose the suitable eartip for the best sound and secure fit.
- Select the left or right earbud and insert to the corresponding ear.
- Rotate the earbud back and forth for the eartip to create a comfortable seal.
What’s in the Box
Product Diagram
Pairing Your Earbuds
-
First-time Pairing with Device Step1. Remove the insulating film on both earbuds.
Step2. Put both earbuds back into the charging case and close the charging case.
Step 3. Open the charging case and the earbuds will automatically power on and go into pairing mode.
Step 4. Activate Bluetooth on your Bluetooth-enabled device and search for other Bluetooth devices.
Step 5. Select “EarFun Air Pro 3” from the list of Bluetooth devices shown.
(if a password is requested, type ‘OO00’.) Notes:
• The earbuds will automatically connect with the previously paired device when the case is open.
• Each earbud can be used independently. -
Connect to a New Device
Option A
Step 1. Unpair the earbuds from the Bluetooth-enabled device that’s connected. The earbuds will disconnect from the current device and go into pairing mode to be paired again.
Step 2. Search on the new device and connect.
Option B
Step 1. Put both earbuds back into the charging case and make sure they are being charged. Keep the lid open – then press and hold the button on the case for 3 seconds until the LED indicators on earbuds start flashing blue rapidly.
Step 2. Search on the new device and connect. -
Pairing and connecting two Bluetooth devices simultaneously
Step1. Pair with the first device and stay connected.
Step2. Keep the earbuds in the charging case, then press and hold the button on the case for 3 seconds until the LED indicator on earbuds starts flashing blue rapidly. The earbuds will enter pairing mode and disconnected from the first device.
Step3. Search on the second device to connect the earbuds.
Step4. Manually reconnect the earbuds on the first device.
Note:
The earbuds will automatically connect to both devices after finishing setting
up the multipoint connection.
Fuction
Note:
If the earbuds are not connected to any device, they will automatically power
off after 10 minutes for saving the battery life.
Earbuds LED Indicator
| Power on | Blue indicator flashes for is |
|---|---|
| Power off | Red indicator flashes for is |
| Pairing mode | Indicator flashes blue |
| Successfully connected | Indicator turns off |
| Factory reset | Indicator flashes purple |
Reset and Reconnecting
If you fail to establish a connection between two earbuds or between the earbuds and Bluetooth devices, please try the following steps:
- Put both earbuds into the charging case.
- Keep the charging case open, then press and hold the button on the case for at least 8s until both earbuds flash purple. The earbuds have been reset successfully reset.
- Delete the previous connection from the Bluetooth device and reactivate Bluetooth to reconnect “EarFun Air Pro 3”.
Charging
- Dry the earbuds, charging contactors and USB port completely before charging.
- Open or close the charging case to activate the case battery level LED indicator.
- Put earbuds back into the charging case and the earbuds will start charging.
- Fully charge both the earbuds and the charging case before first use.
Specification
| Bluetooth version | V5.3 |
|---|---|
| Bluetooth frequency | 2.402GHz-2.480GHz |
| Bluetooth profile | A2DP, AVRCP, HFP, HSP |
| Bluetooth transmitted power | <7dBm (for EU) |
| Maximum working range | 15m(without obstacles) |
| Battery capacity | 54mAh x 2(earbuds), 520mAh(charging case) |
| Charging time | 1 hour(for earbuds), |
2 hours(for charging case via USB-C),
3.5 hours(for charging case via wireless charger)
Playtime| ANC OFF – Up to 9 hours. Totally 45 hours with the charging case;
(varies by volume level and audio content),
ANC ON – Up to 7 hours. Totally 37 hours with the charging case;
(varies by volume level and audio content)
Input| 5V ****1A
Dimensions| 60mm x 50mm x 31mm
Weight| 52g
Trobuleshooting
Q: Can I use both earphones separately?
A: Yes, each earbud can be used independently.
Q: The earphones are turning on, but it doesn’t connect to my device?
A: To connect the earbuds to your device, please ensure the insulating films on both earbuds were removed first, then check if the Bluetooth is enabled. If the earbuds still don't connect to your device, please perform a reset or contact our customer support.
Q: Why is the connection not stable and cuts out intermittently?
A: Please make sure there are no objects between the earphones and your Bluetooth device and make sure there is no radio or WIFI interference nearby.
Q: What is the range of Bluetooth earphones?
A; Bluetooth earphones have maximum range of 49 feet (15m, no obstacle), However, the actual range will depend on usage and environment.
Q: Is there volume control on the earphones?
A: Yes, 1x tap on the left earbud decreases the volume and 1x tap on the right earbud increases it.
Q: My earphones will not switch on.
A: Please recharge them and make sure they have enough battery power. If they are fully charged and still nothing happens or if you are not able to charge them, please contact our customer support.
A: No, the earbuds are sweat and waterproof but the charging case is not.
Q: Will the earbuds shut off automatically?
A: The earbuds will stay on as long as they are connected to a device. If no audio is playing, they will enter power-saving mode and wake up once audio playback resumes. If the earbuds are not connected to any devices they will automatically power off after 10 minutes.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules, These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
CAUTION
Risk of explosion if the battery is replaced by an incorrect type Disposal of
a battery into fire or a hot even, or mechanically crushing or cutting of a
battery, that can result in an explosion;
Leaving a battery in an extremely high temperature surrounding environment
that can result in an explosion or the leakage of flammable liquid or gas;
A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
To prevent possible hearing damage, do not listen at high volume levels for
long periods.
BLUETOOTH
The Bluetooth word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Earfun Technology (HK)
Limited is under license.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its
subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United
States and other countries. aptX is a trademark of Qualcomm Technologies
International, Ltd., registered in the United States and other countries.
Other trademarks and trade names are those of their respective owners.
EU Declaration of Conformity
Earfun Technology (HK) Limited hereby declares that this equipment is in
compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU and RoHS 2011/ 65/EU Directive. The declaration of
conformity may be consulted in the support section of our Web site, accessible
from www.myearfun.com
UK Declaration of Conformit
Hereby, [Earfun Technology (HK) Limited] declares that the radio equipment
type [TW500] is in compliance with UK Radio Equipment Regulations (SI
2017/1206). The full text of the declaration of conformity is available at the
following internet address: www.myearfun.com
MODEL: TW500
FCC ID: 2AVIT-TW500
Customer Service
For FAQS and more information:
Please send an email to: service@myearfun.com
www.myearfun.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>